Ptfe Membrane 0.2

Compare Tool

Select up to 3 products

Ptfe Membrane 0.2
1 - 32 of 44
Sort
View
Show
  • Patented VersaCap® is leak-proof, has replaceable platinum-cured silicone gaskets, and provides the ultimate in top-connection flexibility. Open VersaCap® is compatible with a variety of adapter inserts, enabling users to quickly change the top connections of each carboy or bottle to match their…

  • …solvents Optically clear when wet Hydrophilic PTFE membranes are a thin, unsupported, highly porous film that offers maximum chemical and pH resistance to a broad range of aqueous and organic solvents. This membrane exhibits high flow rates with minimal aqueous extractables(<0.3…

  • PTFE membrane is a thin, highly porous film that behaves as an absolute retentive membrane. Their inherently hydrophobic nature make PTFE membranes ideal for applications such as filtering gases, aqueous aerosols, protecting vacuum pumps, or sterile venting fermentation tanks. PTFE is inert…

  • PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 µm and 0.5 µm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 µm membranes. WTP and TE membrane ranges WTP membranes

  • Syringe Type Membrane Filters

    Thermo Scientific Nalgene

    …pre-assembled. PES membrane is lower protein binding and offers high flow rates, lower extractables, greater strength and chemical resistance than comparable cellulosic and nylon membranes. Syringe/In-Line - Teflon PTFE Membrane (4618S35 and S37) Hydrophobic PTFE membrane is ideal for…

  • PTFE Membrane Syringe Filters

    mdi Membrane Technologies

    mdi PTFE membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

  • Hydrophilic PTFE Membrane Syringe Filters

    mdi Membrane Technologies

    mdi Hydrophilic PTFE membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand…

  • …essential. Clarify and filter sterilize biological fluids, tissue culture media, proteinaceous and enzyme solutions. Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC…

  • Plain Bottom Erlenmeyer Flasks

    Thermo Scientific Nalgene

    …contamination. Flasks are made of lightweight clear PETG with molded-in graduations.  High-density polyethylene closure uses a hydrophobic 0.2 µm PTFE membrane that allows sterile air exchange. Capacities range from 125 to 2000 mL . Individually packaged for easy storage and handling.

  • mdi PTFE membrane Syringe filters type SYTG incorporate a PTFE membrane with a multi-layered binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC…

  • Disposable Erlenmeyer Flasks

    Thermo Scientific Nalgene

    …of cross contamination. Flasks are made of lightweight clear PETG with molded-in graduations. High-density polyethylene closure uses a hydrophobic 0.2 µm PTFE membrane that allows sterile air exchange. Capacities range from 125 to 2000 mL. Individually packaged for easy storage and handling.

  • …and non-aqueous solvents, such as those used in GC and HPLC with the Thermo Scientific™ Nalgene™ 50mm Inline Syringe Filter with PTFE membrane. Also for sterile filtration of air and gases. Provides an excellent barrier for sterile venting of benchtop fermentors, or protecting vacuum…

  • …of the hydrophobic characteristics of PTFE membrane filters and their ability to stop aqueous aerosols. Pore sizes of 0.2 µm and 0.5 µm are typically used. Sterile venting of vacuum manifolds, fermentation vessels, and filtrate tanks and containers utilize PTFE 0.2 µm membranes.

  • …with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing for use with organic solvents and chemically aggressive solutions. PTFE filter membrane is resistant to most solvents Available in 0.05, 0.1, 0.2, 0.45, and 1.0 µm pore sizes 0.05 µm pore size capsules…

  • …Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC samples. PTFE-Hydrophilic - Filter aqueous solutions and organic solvents. This membrane is versatile and and…

  • Carboy Vent Filter, 0.2 Micron

    Thermo Scientific Nalgene

    …venting and solvent filtration applications Useful for maintaining purified water stored in carboys Features a Teflon PTFE membrane Hydrophobic membrane permits sterile venting on a slow exhaust/liquid autoclave cycle of carboys up to 50L Can be used up to five times in venting…

  • … Reduces cost while increasing productivity 0.2 or 0.45 µm filter 12 x 32 mm vials Replace syringe-coupled filtration devices and autosampler vials with a single, disposable unit Available in seven different membrane materials Each Mini-UniPrep consists of two parts:…

  • Minisart AIR

    Sartorius

    Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock.

  • … GD/X membrane options for chemical compatibility Whatman GD/X syringe filters are manufactured with a wide range of membrane materials to support your specific application. Options include: Nylon syringe filters High-charge nylon syringe filters PES syringe filters PVDF syringe filters PTFE

  • Class A Borosilicate Glass, 3 side baffles positioned at 120 degree and 3 bottom baffles offset from side baffles, GL45 PP Membrane Cap has a sealed in 0.2µ PTFE membrane, cap can be tightened during autoclaving.

  • …of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene housing with a female Luer-lok inlet and a male Luer slip outlet. All materials comply with USP Class VI Standards. PES - high asymmetric PES membrane, high flow rate,…

  • …and cost-effective sample processing Eliminates the need for separate syringes, syringe membrane filters, vials, and septa Designed for use with an HPLC or UHPLC autosampler for high-throughput analysis 0.2 µm and 0.45 µm pore sizes available to meet sample requirements Compatible with most…

  • Designed to fit pre-existing filling systems for other product brands 33mm polyethylene threaded cap Vented overcap has 0.2µm PTFE membrane sealed into the peelable foil cover Sterilized by gamma irradiation Double bagged

  • 25mm ABLUO™ Syringe Filters

    GVS Filter Technology

    …support the membrane allowing sample injection or aspiration Features and Benefits Membrane materials: Cellulose Acetate, Nylon, PTFE, PES, PVDF, Regenerated Cellulose, Nitrocellulose, Polyethylene, Glass Fiber Membrane Diameter: 25 mm Pore Size: 0.20 μm, 0.22 μm,…

  • SLFGR04NL

    MilliporeSigma

    These 0.2µm syringe filters are designed for particle removal and preparation of organic solvents and similar solutions prior to chromatography analysis or other instrument analysis. Syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration 4 mm Millex filters are…

  • … Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high…

  • … Foxx Autofil® PP is designed to conveniently fit on top of most laboratory bottles with a GL45 thread. Autofil® PP is available in 3 different types of membrane: PES, Nylon, and PTFE. It is available in 2 different pore sizes: 0.2μm, or 0.45μm and it is available in 500mL and 1000mL.

  • …your laboratory's efficiency. The SoftAide is ideal for use with both glass and plastic standard pipettes. The reusable safety check valve and hydrophobic 0.2 µm PTFE membrane filter prevents contamination of the unit by liquid or vapors of the solution being aspirated into the pipette.

  • SLLG025SS

    MilliporeSigma

    A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50

  • SLFG025NK

    MilliporeSigma

    This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile,…

  • SLLGR04NL

    MilliporeSigma

    …Millex syringe filters provide unsurpassed quality and consistency of results. This 4 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in Fine particle removal from aqueous & organic solutions. Comes in a pack of 100

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.