Ptfe Membrane 0.2

Compare Tool

Select up to 3 products

Ptfe Membrane 0.2
1 - 32 of 45
Sort
View
Show
  • Hydrophilic PTFE Membrane Filters

    Advantec MFS

    …solvents Optically clear when wet Hydrophilic PTFE membranes are a thin, unsupported, highly porous film that offers maximum chemical and pH resistance to a broad range of aqueous and organic solvents. This membrane exhibits high flow rates with minimal aqueous extractables(<0.3…

  • Hydrophobic PTFE Membrane Filters

    Advantec MFS

    PTFE membrane is a thin, highly porous film that behaves as an absolute retentive membrane. Their inherently hydrophobic nature make PTFE membranes ideal for applications such as filtering gases, aqueous aerosols, protecting vacuum pumps, or sterile venting fermentation tanks. PTFE is inert…

  • Syringe Filters and 50mm Units, Sterile - MCE, CA, NY, PES, PTFE

    Advantec MFS

    …essential. Clarify and filter sterilize biological fluids, tissue culture media, proteinaceous and enzyme solutions. Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC…

  • Nalgene Erlenmeyer Flasks

    Thermo Scientific Nalgene

    …Available with a plain or baffled bottom for benchtop or shaker table use. Made of blue HDPE for easy identification Hydrophobic 0.2 µm PTFE membrane is heat welded into place for effective sealing Vented closures provide sterile gas exchange for shaker and suspension cell…

  • Whatman SteriVENT Integral Sterile Vent Filters

    GE Healthcare

    SteriVENT filters, venting filters with an integral PTFE membrane, are well suited for sterile venting of vessels and tanks during draining and filling. Hydrophobic 0.2 µm PTFE membrane makes SteriVENT a high-quality PTFE air filter Can be autoclaved 50 times without loss of performance;…

  • 50mm Inline Syringe Filters with PTFE Membrane

    Thermo Scientific Nalgene

    …and non-aqueous solvents, such as those used in GC and HPLC with the Thermo Scientific™ Nalgene™ 50mm Inline Syringe Filter with PTFE membrane. Also for sterile filtration of air and gases. Provides an excellent barrier for sterile venting of benchtop fermentors, or protecting vacuum…

  • Aervent–50 Disposable Filters with Hydrophobic Aervent Membrane

    MilliporeSigma

    Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high flow…

  • PTFE Membrane Syringe Filters

    mdi Membrane Technologies

    mdi PTFE membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

  • Whatman PFTE Membrane Filters, TE Range

    GE Healthcare

    …of the hydrophobic characteristics of PTFE membrane filters and their ability to stop aqueous aerosols. Pore sizes of 0.2 µm and 0.5 µm are typically used. Sterile venting of vacuum manifolds, fermentation vessels, and filtrate tanks and containers utilize PTFE 0.2 µm membranes.

  • PTFE Membrane Circles

    GE Healthcare

    …characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 µm and 0.5 µm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 µm membranes. WTP and TE membrane ranges WTP membranes use a…

  • Whatman Polycap TF

    GE Healthcare

    …with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing for use with organic solvents and chemically aggressive solutions. PTFE filter membrane is resistant to most solvents Available in 0.05, 0.1, 0.2, 0.45, and 1.0 µm pore sizes 0.05 µm pore size capsules…

  • Minisart AIR

    Sartorius

    Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock.

  • Carboy Vent Filter, 0.2 Micron

    Thermo Scientific Nalgene

    …venting and solvent filtration applications Useful for maintaining purified water stored in carboys Features a Teflon PTFE membrane Hydrophobic membrane permits sterile venting on a slow exhaust/liquid autoclave cycle of carboys up to 50L Can be used up to five times in venting…

  • SoftAide™ Pipette Controller

    Hamilton

    …your laboratory's efficiency. The SoftAide is ideal for use with both glass and plastic standard pipettes. The reusable safety check valve and hydrophobic 0.2 µm PTFE membrane filter prevents contamination of the unit by liquid or vapors of the solution being aspirated into the pipette.

  • Disposable Erlenmeyer Flasks

    Thermo Scientific Nalgene

    …of cross contamination. Flasks are made of lightweight clear PETG with molded-in graduations. High-density polyethylene closure uses a hydrophobic 0.2 µm PTFE membrane that allows sterile air exchange. Capacities range from 125 to 2000 mL. Individually packaged for easy storage and handling.

  • Hydrophilic PTFE Membrane Syringe Filters

    mdi Membrane Technologies

    mdi Hydrophilic PTFE membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand…

  • Syringe Type Membrane Filters

    Thermo Scientific Nalgene

    …pre-assembled. PES membrane is lower protein binding and offers high flow rates, lower extractables, greater strength and chemical resistance than comparable cellulosic and nylon membranes. Syringe/In-Line - Teflon PTFE Membrane (4618S35 and S37) Hydrophobic PTFE membrane is ideal for…

  • PTFE Membrane Syringe Filters with Microglassfiber Prefilters

    mdi Membrane Technologies

    mdi PTFE membrane Syringe filters type SYTG incorporate a PTFE membrane with a multi-layered binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC…

  • GL45 6 Baffle Shake Flasks

    Bellco Glass 

    Class A Borosilicate Glass, 3 side baffles positioned at 120 degree and 3 bottom baffles offset from side baffles, GL45 PP Membrane Cap has a sealed in 0.2µ PTFE membrane, cap can be tightened during autoclaving.

  • ProCulture® Gas Venting Cap with 50mm 0.2µm PTFE Filter with Sanitary Fitting…

    Corning

    …The fittings are comprised of a PET insert with a fluorocarbon O-ring and a 45mm polypropylene sealing cap. Gas filters have 0.2(u)m pore PTFE membranes. Stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely…

  • 33mm Polyethylene Universal Cap with Vented Overcap

    Corning

    Designed to fit pre-existing filling systems for other product brands 33mm polyethylene threaded cap Vented overcap has 0.2µm PTFE membrane sealed into the peelable foil cover Sterilized by gamma irradiation Double bagged

  • Plain Bottom Erlenmeyer Flasks

    Thermo Scientific Nalgene

    …contamination. Flasks are made of lightweight clear PETG with molded-in graduations.  High-density polyethylene closure uses a hydrophobic 0.2 µm PTFE membrane that allows sterile air exchange. Capacities range from 125 to 2000 mL . Individually packaged for easy storage and handling.

  • SLLG025SS

    MilliporeSigma

    A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50

  • SLFG025NK

    MilliporeSigma

    This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile,…

  • SLLGR04NL

    MilliporeSigma

    …Millex syringe filters provide unsurpassed quality and consistency of results. This 4 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in Fine particle removal from aqueous & organic solutions. Comes in a pack of 100

  • SLLGC13NL

    MilliporeSigma

    This 13 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in clarification of aqueous & mild organic solutions for ion chromatography. Disposable syringe-operated filter units certified for ion chromatography sample…

  • Disposable Polyethylene Vent Cap for GL45 Plastic Spinner Flasks, Sterile

    Corning

    These disposable high density polyethylene sterile vent caps contain a 0.2µm pore hydrophobic PTFE membrane. They are designed to fit the Corning® 500mL, 1L and 3L Disposable Spinner Flasks (Cat. Nos. 3153, 3561and 3563) for culture applications requiring increased gas exchange. They also fit…

  • Thomson SINGLE StEP Low Evaporation Filter Vials

    Restek

    …vials offer fast sample filtration and require only a squeeze of your fingers Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, or nylon Rugged polypropylene vial houses insert with 450 μL loading capacity and low dead volume (120 μL) Fit…

  • Thomson SINGLE StEP Standard Filter Vials

    Restek

    …of your fingers Minimize sample loss by eliminating multiple transfers Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon Pre-slit PTFE/silicone caps help eliminate broken autosampler needles and cored septa Rugged polypropylene…

  • Thomson SINGLE StEP Nano Filter Vials

    Restek

    …offer fast sample filtration and require only a squeeze of your fingers Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon Available with either standard or pre-slit PTFE/silicone caps. Standard caps minimize evaporation and pre-slit…

  • Thomson SINGLE StEP eXtreme Filter Vials

    Restek

    …offer fast sample filtration and require only a squeeze of your fingers Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon Pre-slit PTFE/silicone caps help eliminate broken autosampler needles and cored septa Rugged polypropylene…

  • Syringe Filters and 50mm Units, Non-Sterile - MCE, CA, NY, PTFE, PVDF

    Advantec MFS

    …Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC samples. PTFE-Hydrophilic - Filter aqueous solutions and organic solvents. This membrane is versatile and and…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.