Ptfe Disc Filter

EZFlow 25mm, 47mm, and 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical…

Sartorius membrane filters are available in a wide range of pore sizes, membrane types and diameters to fit the extensive array of applications being performed in the laboratory. Available in diameters from 13mm to 90mm and pore sizes from 0.1 to 8µm depending on material. Additionally, Cellulose…

…membrane offers unique PMP support ring for PM 10 and PM 2.5 dichotomous and other air sampling techniques Ultimate in chemical compatibility for filtering harsh chemicals and HPLC mobile phases that destroy other membrane materials   Please Note: Pall Laboratory items are for…

…Recognizing the need to protect this resource, industries, governments and regulatory agencies around the world monitor ambient air. Millipore's PTFE Membrane for PM2.5 Particle Monitoring has been developed using US EPA test standards. Legal Information: Fluoropore is a registered trademark…

Chromatographic column with 24/40 joint at top, 2 mm bore 1:5 taper solid PTFE stopcock plug at bottom and porosity B (70 - 100 m) fritted disc sealed near bottom of tube. These columns also appear in expanded listing under 5871.

Filter material and discs (paper, PTFE, and polypropylene).

…90mm Glass Fiber membrane disc filters are manufactured from Borosilicate glass without binders. These glass fiber disc filters have good solids holding capacity and can be used as pre-filters for heavily contaminated solution samples. The glass fiber membrane disc filters have high flow rates, wet…

Cup is designed to catch all flaking that occurs with PTFE stirrer bearings. Made entirely of PTFE, the complete item consists of a compression fitting, deep perforated PTFE cup and a 50 micron porosity PTFE filter disc.

Chromatographic column with 2mm bore, 1:5 taper solid PTFE stopcock plug and porosity B (70 - 100 m) fritted disc sealed in at bottom and #15 Ace-Thred at top of column. Column supplied with 7506-06 Nylon bushing and FETFE O-Ring. Complete item consists of column with bushing and O-Ring and 5853-07…

…& I Cleaning Process: Compressed air passes through a condensate separator and coalescing filter to remove aerosols and fine dust particles. Next, the air passes through an absorbent filter to remove gases. A vacuum draws the particulate-laden atmosphere out of the container. Individually…

…than thru the bottom. Adapters are PTFE and include a capfe o-ring, PTFE retaining ring, 100 micron polyethylene filter disc and 350 micron polypropylene filter screen. Code -07 includes a glass filter support from our 5848 product family. See also our 5814 family for filter support screen options.

…has a 10 micron polyethylene fritted disc. Polypropylene filter funnel is designed for use with the CG-1049-J style glass vacuum adapter and a flask or vial. The CG-1049-J vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates from…

…consists of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The CG-1049-J vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates…

Buchner style filter funnel having a lower standard taper inner joint and serrated tubulation for connection to a vacuum source. Disc diameters and height above the disc are the same as CG-1402. Improved design incorporates a delivery stem being sealed within the inner joint to prevent breakage.…

Threadless Sanitary Connections 90mm, 142mm, 293mm Filter Diameters Available in Type 304ss and 316ss Large Sanitary Stainless Steel Pressure Filter Holders for batch type laboratory filtration using disc media. Sanitary connections can be completely disassembled for thorough cleaning.…

…are used in-line to filter gases and liquids such as culture media, solvents, and photoresists. Use our sanitary models for pharmaceutical type applications. The holder features a PTFE coated photoetched stainless steel filter support screen for autoclaving with filter in place. Unit comes…

…consists of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The CG-1049-J vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates…

…system consists of a polypropylene filter funnel with silica gel/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The CG-1049-J vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates from…

…or filter paper. Ideal for solvent recycling and other filter applications. All threaded apparatus eliminates need for clamps. Course glass fritted disc is interchangable. Gl80 wide mouth bottle with #15 Ace-Safe connector for vacuum connection on side. 1000mL glass funnel on top, all PTFE threaded…

…allows longer fatigue-free pipetting Dispense selection by gravity and blow-out with fully adjustable speed setting Self-invert design for ease of benchtop placement and contamination prevention Interchangeable 0.2 µm PTFE disc filter included Silicon interchangeable pipet holders

Cylindrical vessels with #15 Ace-Thred at both ends, no side port. Use 5838-91 PTFE Adapter with removable filter disc and 5839-04 PTFE Valve with luer extension at either end, see 6404 for listings.

…L4071123), Stainless Steel Sample Tubes - Pkg.10 (P/N M0413595), Glass Sample Tube - Pkg.10 (P/N M0413598), Five Large PTFE Filter Discs (P/N L1003029), Five PTFE Filter Discs (P/N L1003030), Two Graphite Ferrules (P/N L4271187), Two Trap Tube Nuts (P/N L4275009), Trap Tube (P/N M0410094), Ten Viton…

Cylindrical vessel with a 2mm bore PTFE stopcock at top, GPI threaded angled side port, & #15 Ace-Thred at bottom that accepts a PTFE adapter with removable Por. C glass filter disc & a PTFE shut-off valve. PTFE adapter has front type seal using a CAPFE O-Ring to make a compression seal in the #15…

Cylindrical vessel with a 2mm bore PTFE stopcock, GL thread at top, Ace-Thred at bottom that accepts a PTFE adapter with removable Por. C glass filter disc and a PTFE shut-off valve. PTFE adapter has a front type seal using a CAPFE O-Ring to make a compression seal in the Ace-Thred on Vessel. Other…

…75mm membrane filters. The new design utilizes a PTFE Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble, disassemble and clean. The fritted disc can be easily…

…than 10 seconds. Fully adjustable speed-setting as well as gravity delivery and blow-out dispensing modes are available. Exchangeable 0.2 µm PTFE disc filter acts as shutdown system if overfill occurs. The exchangeable pipette holders are made of silicon and accommodate glass or plastic pipettes…

A simple, all PTFE septum injector. Allows direct, on-column injection to the center of the filter disc at top of column without stopping the solvent flow through the 1/4"-28 female side thread (with or without helicoil). Locknut design provides leaktight seal without o-rings. You can order the…

…is all PTFE with a porosity C (25-50m) glass disc. Complete column supplied with adjustable plunging top fitting,5801-14 bottom fitting with 1/4-28 tap and a three meter length of 1.5mmid PTFE tubing. See 5814 packing supports sized for #11 fittings like 5814-11 paper filter discs (not included).

…Borosilicate glass cylinder and PTFE components for broad compatibility • Autoclavable with membrane in-place • Top plate opening provides access to contents without dismantling • Few components, so it's easy to clean and assemble • For 76 mm disc filters ApplicationsConcentration and Buffer…

…to No. 7759, except with 2mm bore PTFE stopcock on 20 and 80mL sizes, 3mm bore PTFE on 250mL size. In addition to collecting and filtering, this vessel may be used as a crystallizer. With two standard taper 14/20 or 24/25 outer joints and two standard taper 14/35 or 24/40 inner. With fritted disc.