Propeller

Compare Tool

Select up to 3 products

Propeller
1 - 32 of 56
Sort
View
Show
  • Propeller Shafts

    Troemner

    All stainless steel 303/304 are constructed with 15° pitched blades which creates an axial flow. Various shaft lengths and diameters with permanent 2" or 3.5" 3-blade propeller for every mixing need available. PTFE coating available.

  • Propeller Blades

    Troemner

    Made of stainless steel. You can customize the propeller to the shaft of your choice. Several blades can be attached for increased agitation. Creates axial flow. Blades come on a bushing with a stainless steel hex-head screw and Allen key for attaching to mixing shafts.

  • 316 SS Lightweight Three-Blade Propeller

    Oakton

    Lightweight three-blade propellers have blades that twist to achieve the desired pitch.

  • Propellers

    Oakton

    Use these three-bladed electro-polished propellers for your general-purpose mixing. Use singly or mount several on a shaft for thorough agitation. Choose marine-style propellers for your general-purpose mixing or choose turbine style for your airless mixing in deep containers. Dispersion…

  • PTFE Shafts and Propellers

    Arrow Engineering

    MUST BE ORDERED AS AN ASSEMBLY. A PTFE Propeller must be ordered together with a PTFE Shaft (each purchased separately).

  • Stainless Steel Shafts and Propellers

    Arrow Engineering

  • Labtools Stainless Steel Agitators, Shafts, and Propellers

    Eberbach

    … Stainless Steel Stirring Shafts Stainless Steel Shaft with fatted section for securing propeller Stainless Steel Propellers Stainless Steel Propellers come complete with wrench Stainless Steel Agitators with Swing Blades Swinging Blade Stirring…

  • Stir Shaft, 4 Blade Propeller, PTFE

    Ace Glass

    PTFE covered stainless steel shaft with solid PTFE, 4 blade screw propeller. Blades are pitched 45 degrees. For a better grip by the stir motor chuck, 50mm of stainless is left exposed.

  • Digital Stir-Tester Accessories

    Glas-Col

    …4-Blade Propeller Shaft diameter 6.4 mm, with stainless steel, 4-blade propeller on one end Listings show shaft length x propeller diameter Stirrer Shaft, with 3-Blade Propeller 8 mm-diameter shaft has stainless steel propeller and includes coupling Shaft length 222 mm; propeller diameter…

  • Mixing Shafts

    Troemner

    Made of stainless steel Add propeller blades to these shafts to customize a propeller shaft Increase agitation with multiple blades on one shaft

  • Replacement Parts For One-Gallon Blenders

    Waring

    3402G21 blade unit includes stainless steel cutting propeller, shaft, bearing and stainless steel washer; does not include external lock nut or Teflon ® washer. 3402G25 blade is the four-bladed stainless steel cutting propeller only.

  • Standard Size Blade Unit For 0.4 H.P. Waring Blenders

    Waring

    With three-blade cutting propeller of stainless steel; other metal parts in contact with sample are or corrosion-resistant, chromium-plated brass Complete with bearings, nuts and Neoprene gaskets Overall diameter of cutting blades at widest point is 2 1/4”

  • Anti-phospho LRRK2 (Ser910), clone ID8

    MilliporeSigma

    Leucine-rich repeat kinase 2, LRRK2, PARK8 gene, ROCO family, Roc domain, GTPase activity, COR domain, tyrosine kinase-like MAPKKK-related domain, WD40 propeller motif repeats, Ras-like small GTPase family domain, C-terminal of Roc domain, LRRK, Parkinson’s disease

  • Anti-LRRK2, clone N231B/34

    MilliporeSigma

    Leucine-rich repeat kinase 2, LRRK2, PARK8 gene, ROCO family of proteins, Roc domain, GTPase activity, COR domain, tyrosine kinase-like MAPKKK-related domain, WD40 propeller motif repeats, Ras-like small GTPase family domain, C-terminal of Roc, LRRK

  • Mini-Container Jars For Blenders

    Waring

    Stainless steel container and base with snap-fit plastic cover Three sizes cover a load of 12 to 250 mL Usable on standard size Waring Blenders Removable 4-blade stainless steel cutting propeller is secured in jar by a standard unit

  • Standard Size Blade Unit For 0.7 H.P. Waring Blenders

    Waring

    Similar to 3392E05, but with heavier, stainless steel cutting propeller Overall diameter of cutting blades at widest point 2 1/2” Caution: this heavy-duty blade unit should not be used with 0.4 H.P. Waring Blenders as it may reduce the life of the motor.

  • Stirrer, Model 107, Single Shaft

    Talboys

    Constant-speed stirrer which can mix large amounts of low viscous solutions with the proper propeller selection Speed of 1,600 rpm provides significant agitation to water-like fluids Extremely quiet, non-sparking, 1/30 HP motor is equipped with thermal overload protection and an on/off switch …

  • Stirrer, Model 105, Single Shaft

    Talboys

    Constant-speed stirrer which, with the proper propeller selection, can mix over 5 gallons of water Constant speed of 1,550 rpm provides significant agitation to water-like fluids 1/80 HP Non-sparking motor is equipped with thermal overload protection and an on/off switch Although…

  • Digital Stir-Testers

    Glas-Col

    …Available for 120 or 240 V, 50/60 Hz operation. Includes drive motor, mounting bracket, controller, 3-jaw keyless chuck and arbor, paddle, propeller and heavy-duty 90° clamp. Heavy Duty, Model HST20 Totally enclosed, 1/8 hp, permanent magnet, DC motor Direct-drive, with rpm/torque readout…

  • Anti-LRRK2, clone 8G10

    MilliporeSigma

    …LRRK2, PARK8 gene, ROCO family of proteins, Roc domain, intrinsic GTPase activity, COR domain, tyrosine kinase-like MAPKKK-related domain, WD40 propeller motif repeat, Ras-like small GTPase family domain, C-terminal of Roc domain, LRRK2, cytoplasm, liver, heart, lung, skeletal muscles, placenta,…

  • Fan Cart

    United Scientific Supplies

    …Newton’s principle of action and reaction. Batteries are contained in the removable power unit and the fan is con-trolled by a switch. The propeller delivers a thrust of about 88 mN, accelerating the cart at 0.4 m/s2. A transparent plate can be attached to show the effect of reversing the…

  • Air-Driven Stirrers

    Arrow Engineering

    …stainless steel stirring shaft 305 mm long, with 3-blade propeller, 64 mm diameter and shaft 9.5 mm diameter. Manufacturer recommends use of air filter (such as 4671J10) and oiler in compressed air line. Model 8583J20: Produces propeller speeds from approximately 50 to 1,200 rpm …

  • Servodyne™ Electronic Mixers

    Oakton

    …packages. Complete System—Everything you need! These convenient, ready-made systems come complete with speed controller, mixer head, shaft, propeller, clamp, and stand. Note: High-torque models include keyless chuck. Low-torque models include collet. Mixer Heads Optical shaft encoder…

  • G.K.H. Stir Systems

    Glas-Col

    …kg-cm) of torque at slower speeds for stirring more viscous mixtures. Stirrers include motor, mounting bracket, 3-jaw keyless chuck, paddle, propeller and a right angle clamp. NOTE: Model 8836M34 Lab Stand is recommended to mount GT31 Stirrers. GT24 Stirrers (8585H60 and H64) Cool,…

  • Stir-Pak® Heavy-Duty Mixers

    Oakton

    … Complete System—Everything you need! These convenient, ready-made systems come complete with a mixer head, speed controller, shaft, propeller, clamp, and stand. Note: High-torque models include keyless chuck. Low-torque models include collet. Mixer Heads Heads feature a TENV,…

  • Electric Laboratory Stirrers

    Arrow Engineering

    …long and 6 ft. 3-wire cord with grounded plug. Shaft and propeller are made of stainless steel to resist most acids and chemicals for easier cleaning. Shaft measures 12” long x 3/8” diameter and a 2 1/2” propeller. Light Duty Stirrer (8583L20) Ideal for stirring…

  • Impellers & Shafts for Caframo Overhead Stirrers

    Caframo

    …shafts.  Set screws included.  For high shear mixing at medium to high speeds. Thomas No. 1177M46 Pitched blade propeller of 65 mm (2 ½”) diameter, composed of electropolished 316L stainless steel. The 8 mm (5/16”)…

  • Anti-RAG2 antibody produced in mouse, purified immunoglobulin, buffered aqueous…

    MilliporeSigma

    …contain most of the catalytic activity, while the N-terminal of the recombination activating gene 2 component is thought to form a six-bladed propeller in the active core that serves as a binding scaffold for the tight association of the complex with DNA. A C-terminal plant homeodomain finger-like…

  • DLS Digital Overhead Stirrer Package

    VELP

    … Viscosity: up to 25000 mPa*s Counter-reaction: constant speed even when the viscosity changes Included in the package: F201A0155 DLS Overhead Stirrer 80-260V/50-60Hz A00001300 Support Rod and Base A00001301 Double Clamp A00001307 Stirring Shaft with Propeller

  • Anti-RAG2 antibody produced in rabbit, purified immunoglobulin, buffered aqueous…

    MilliporeSigma

    …contain most of the catalytic activity, while the N-terminal of the recombination activating gene 2 component is thought to form a six-bladed propeller in the active core that serves as a binding scaffold for the tight association of the complex with DNA. A C-terminal plant homeodomain finger-like…

  • Anti-RAG2 antibody produced in rabbit,

    MilliporeSigma

    …contain most of the catalytic activity, while the N-terminal of the recombination activating gene 2 component is thought to form a six-bladed propeller in the active core that serves as a binding scaffold for the tight association of the complex with DNA. A C-terminal plant homeodomain finger-like…

  • Monoclonal Anti-RAG2, (C-terminal) antibody produced in mouse, clone 2G8,…

    MilliporeSigma

    …contain most of the catalytic activity, while the N-terminal of the recombination activating gene 2 component is thought to form a six-bladed propeller in the active core that serves as a binding scaffold for the tight association of the complex with DNA. A C-terminal plant homeodomain finger-like…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.