Pressure Reaction Vessel

Compare Tool

Select up to 3 products

Pressure Reaction Vessel
1 - 32 of 54
Sort
View
Show
  • …wall pressure vessels have an internal thread for use with PTFE bushings as pressure seals. The unique design allows hand tightening and loosing for easy access into the vessel. O-ring is positioned on the bushing above the thread for improved sealing. Vessels are useful for pressure reactions and…

  • pressurization or contents release, allowing many test parameters Reaction vessels are available in three standard capacities: 3 oz., 6 oz. and 12 oz. CAUTION: safety precautions should be used with glass under pressure. Maximum safe pressure depends on service conditions. Pressure

  • …featuring a one-piece, unjacketed, pressure vessel with a combination Ace-thred valve and 28/15 o-ring ball joint bottom outlet. Vessel top has a 25mm Ace-thred center neck and various multi-neck configurations. System is designed to perform positive pressure reactions at up to 45 psi at 100 degrees…

  • …Fitting For Direct Connection To Inlet/Outlet S.S. Ball Valve For Draining Jacket Fluid Outlet Features: 2" Pressure Gauge, 0-15 PSI Pressure Relief Valve Preset And Safety Sealed To 12 PSI 3/4” ID Triple Insulated Flexible Hose Has Welded On S.S. Beaded Pipe Fitting…

  • pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and has a higher allowable pressure

  • Heavy wall pressure vessel is the same as CG-1880, but shaped similar to a round bottom flask with a #25 internal thread for use with a PTFE bushing as a pressure seal. Complete apparatus is supplied with vessel, back seal solid PTFE bushing and viton o-ring. Other vessel sizes and safety plastic…

  • pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and has a higher allowable pressure

  • Complete, two-piece, jacketed flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and head) design allows the…

  • …reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed.…

  • Adapter permits rotary evaporation of the contents of any of our CG-1880 pressure vessels after the reaction is complete. Adapter can also be connected to any vacuum line having a 24/40 port or used in conjunction with a CG-1014 adapter to connect to hoses. Eliminates the need to transfer samples…

  • …Clamping which is positive and quick-acting; easier to apply and remove than two-piece clamps Spring-action lugs which cannot crack flange Fiber knobs which are heat-resistant Ribbed Teflon gaskets, which reduce clamp pressure required for complete seal Maximum temperature 200°C

  • Cylindrical shaped tube, similar to AF-0537 but with an standard taper inner joint, useful for simple reactions. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.

  • …and Spray Ball. Pressure and Flow Information: CG-1989-X-22: 22mm Spray Ball -max tank diameter: 2.5ft,  @ 15 PSI (min pressure to spin): 7.23 L/min.;  @ 50 PSI: 14.29 L/min. CG-1989-X-35: 35mm sPRAYbALL -MAX TANK DIAMETER: 4.0FT,; @ 20 PSI (min pressure to spin): 10.45…

  • …electropolished stainless steel pressure vessels to propel filtration fluids through pressure holders by applying external pressure from compressed gases. Increasing pressure increases the efficiency of the EPR (ethylene propylene rubber) O-ring seal. Vessels feature 5-7⁄8"x…

  • …eliminate the use of grease and still avoid freezing. Kettle flange has a groove for a CAPFE O-Ring. Quick Release clamp secures head & kettle. Complete consists of Kettle Top, Kettle Bottom with O-Ring, Condenser, Stopcock Adapter, Condenser Tube, Pressure Bushing, (2) stoppers, and Flange Clamp.

  • …high capacity outlet. BUBBLERS, PRESSURE RELEASE, Used for the purging of AIRFREE® or vacuum apparatus with an inert gas. The pressure release valve is connected on one side to the low pressure gas source and the other side to a manifold or reaction vessel. The check valve prevents oil and…

  • …(whole support and glass vessel shipped pre-assembled) One year warranty and lifetime US-based parts, service, and support. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled…

  • …6384, 6386, 6388, 6423, 6425, 6427, or 6429 reaction flasks. Duran flange supplied with a shallow O-Ring groove for use with mating grooved flask. #15 Ace-Thred center and various #15 and #7 side necks available allow connections under pressure conditions without danger of blowout. For connectors,…

  • …Reactor Securely and Allows Easy Installation/Removal  Lexan Safety Shield On All Four Sides  Pressure Relief Manifold System: Supplied with CG-1969-M High Flow Pressure Relief Manifold System With Insulated Hoses and Bulkhead Fittings  Mobile: Large Swivel Casters with…

  • Complete, two-piece, jacketed flask with bottom outlet, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and…

  • Reaction Kettle Clamp

    SP Wilmad-LabGlass

    This reaction vessel clamp for O-rings and flat flanges is a cast bronze ring with a black oxidized finish. Three insulated, spring activated clamping arms fit beneath the flange of the flask body. Simple pressure on the heat-resistant fiber knobs and a twist, permit attachment or removal.

  • Cylindrical shaped tube useful for storage or simple reactions. Tube has a standard taper outer joint. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.

  • …Addition Port  Reactor Support Plate Holds Reactor Securely and Allows Easy Installation/Removal  Pressure Relief Manifold System: Optional CG-1969-M High Flow Pressure Relief Manifold System with Insulated Hoses and Bulkhead Fittings  Mobile: Large Swivel Casters with…

  • …easy and safe connection of your circulator to our glass process reactors. Manifold helps alleviate excessive mechanical forces placed on the glass vessel inlet/outlet. System is supplied complete as illustrated with Triple Insulated Flexible Hose. Hoses have welded on S.S. Tool-Free™ fitting…

  • pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and has a higher allowable pressure

  • Adapter, Offset

    Ace Glass

    Adapter with #15Ace-Thred top and 14mm OD offset bottom tube with O-Ring grove. Used on small pressure reaction vessels and heads to allow for more space for columns, condensers and addition funnels.

  • …Reactor Securely and Allows Easy Installation/Removal  Lexan Safety Shield On All Four Sides  Pressure Relief Manifold System: Supplied with CG-1969-M High Flow Pressure Relief Manifold System With Insulated Hoses and Bulkhead Fittings Mobile: Large Swivel Casters with…

  • …fitted out and offer sufficient performance for temperature control of photometers, refractometers, viscometers, distillation apparatus, reaction vessels and mini-plants. The main applications are using external applications however the bath opening allows objects to be thermoregulated directly…

  • …two pieces of glass with flat flanges of the same diameter, these stainless steel horseshoe-shaped clamps are uniquely designed. Adjustable tension springs that secure even pressure over the flange area, may be slid on or off easily - thus facilitating assembly and disassembly of apparatus setups.

  • …use during low temperature reactions where standard valves need constant tightening to prevent leakage. The valve is held closed against the bottom of the reactor via spring force and is opened by air pressure. A second regulator is used to supply 4 psi of air pressure as a safety back-up to the…

  • Used with Pressure Reactors, listed in Reaction Section. Heavy wall condenser has a #15 Ace-Thred at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thred on 6433 Reactor Head, One-Piece Pressure Reactor or any vessel with a #15…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.