Portable Fume Hood

Compare Tool

Select up to 3 products

Portable Fume Hood
1 - 28 of 28
Sort
View
Show

Attention Thomas Scientific Customers

Due to the current pandemic, lead times for PPE items are longer than what is listed on our website. Please expect shipping delays of all PPE products during this time.

  • Compact, corrosion-resistant housing Inherently safe design An accessory for the Demonstration Hood, XPert Balance Enclosure, Protector® XVS Ventilation Station or Protector® Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters to…

  • Techni-Dome® 360 Fume Hood

    Bel-Art - SP Scienceware

    The Techni-Dome® Fume Hood has a 50cm (20") ID and 45cm (18") height, making it ideal for simple micropipetting processes, blending of chemicals, handling of small biohazard items or interactive museum/educational displays. Compact; fits on crowded benchtops Clear,…

  • …vapors or particulates. 8" sash opening limits exhaust demand, conserves costly tempered room air and requires a smaller remote blower than most fume hoods. Upper dilution air supply introduces room air at the top of the sash to dilute concentrations in the upper chamber and bathes the back of the…

  • The CApture Portable Fuming System quickly fixes latent fingerprints at the crime scene using microburst or traditional CA fuming methods, while protecting the user from hazardous fumes. Its patented* design combines all the components needed in one compact system: a heater to heat the Super…

  • …and bacterial cultures) by measuring Absorbance (OD) at 600nm Completely portable, this hand-held instrument has a rechargeable battery, so it can be used in incubation cabinets, under anaerobic conditions, or in fume hoods and safety cabinets. The CO 8000 gives a lifetime of stable and repeatable…

  • …inflow velocity Protector Work Stations are specifically designed for the needs of pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a front air foil and rear baffle to direct the inflow air across the work area and away from the operator.  Protector…

  • Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of type 304 Stainless Steel, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of type 304 Stainless Steel, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • …to complete dryness, or collect distillate Compact – portable, minimal bench space. With a small 8 in. x 12 in. footprint and only 18 in. high, the Centrifan PE is self-contained, requires little bench or hood space, and will even fit in a hotcell. Containers - use 20/30/40…

  • Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of composite resin, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat resistance.…

  • Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Fume Adsorbers

    Labconco

    …in the capillary-like channels of the carbon filter while clean air is recirculated into the laboratory. The Fume Adsorber requires no ducting to the outside and is completely portable. It includes one replaceable six pound (2.7 kg) type AC activated carbon filter. The filter holds 20 to 50 times…

  • …is included with each CApture Portable Fuming System. Shipping weight 1 lb. (0.5 kg). Stainless Steel Hook Allows evidence to hang inside the clear chamber during development. Type 304 stainless steel. One Hook is included with each CApture Portable Fuming System. Shipping weight 1 lb. (0.5…

  • Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Standard or extra height models 2-, 3- or 4-feet wide Protector XVS Ventilation Station provides user protection by keeping powders and fumes contained during light duty, fume-generating or weighing procedures. Patented features include air foil with Clean-Sweep openings to enhance airflow and…

  • …evaporate to complete dryness, or collect distillate Compact – portable, minimal bench space. With a small 8 in. x 12 in. footprint and only 18 in. high, the Centrifan PE is self-contained, requires little bench or hood space, and will even fit in a hotcell. Containers - use 20/30/40…

  • …to complete dryness, or collect distillate Compact – portable, minimal bench space. With a small 8 in. x 12 in. footprint and only 18 in. high, the Centrifan PE is self-contained, requires little bench or hood space, and will even fit in a hotcell. Containers - use 20/30/40…

  • …rear plenum of the XPert Balance Enclosure, Protector XVS Ventilation Station, Protector Work Station or Protector Demonstration Hood attached to the FilterMate Portable Exhauster. For downward hose routing. Upper Exhaust Transition Adapters are epoxy-coated steel, 2" x 10" rectangular to 5" or…

  • …to complete dryness, or collect distillate Compact – portable, minimal bench space. With a small 8 in. x 12 in. footprint and only 18 in. high, the Centrifan PE is self-contained, requires little bench or hood space, and will even fit in a hotcell. Containers - use 20/30/40…

  • Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • …evaporate to complete dryness, or collect distillate Compact – portable, minimal bench space. With a small 8 in. x 12 in. footprint and only 18 in. high, the Centrifan PE is self-contained, requires little bench or hood space, and will even fit in a hotcell. Containers - use 20/30/40…

  • …1/500th the solvents and producing 1/500th the waste. Its size and weight allow for convenient use anywhere: from the lab bench to inside a fume hood and from in-the-field analysis to right on a production line. The Axcend Focus LC utilizes single or dual on-column UV-Absorption Detectors…

  • Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • …to complete dryness, or collect distillate Compact – portable, minimal bench space. With a small 8 in. x 12 in. footprint and only 18 in. high, the Centrifan PE is self-contained, requires little bench or hood space, and will even fit in a hotcell. Containers - use 20/30/40…

  • …evaporate to complete dryness, or collect distillate Compact – portable, minimal bench space. With a small 8 in. x 12 in. footprint and only 18 in. high, the Centrifan PE is self-contained, requires little bench or hood space, and will even fit in a hotcell. Containers - use 20/30/40…

  • Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of composite resin, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat resistance.…

  • …evaporate to complete dryness, or collect distillate Compact – portable, minimal bench space. With a small 8 in. x 12 in. footprint and only 18 in. high, the Centrifan PE is self-contained, requires little bench or hood space, and will even fit in a hotcell. Containers - use 20/30/40…

  • …and environment from toxic vapors, gases, fumes, and particulate. The AC600 Series ductless chemical workstation features the use of molded thermoplastics configured for a variety of common applications. Smaller in size, it makes an excellent portable fume hood for the classroom or laboratory. …

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.