Port Cap

Compare Tool

Select up to 3 products

Port Cap
1 - 32 of 96
Sort
View
Show
  • Disposable Aseptic Transfer Caps for Plastic Erlenmeyer Flasks

    Corning

    …Flask Aseptic Transfer Caps are sterile (10 -6 SAL), individually double bagged and fit the 2L Corning® Polycarbonate Erlenmeyer flasks. These aseptic transfer caps can also be used on Corning 850 and 1700cm 2 plastic disposable roller bottles. Venting port ends in a 50mm diameter…

  • Filling / Venting Closure With 1/4 Inch Fittings PP 83B

    Thermo Scientific Nalgene

    … Leakproof systems for secure, aseptic handling of high valued products compared to pouring Includes premounted tubing lengths inside the container to support the integration to most Nalgene bottles and carboys Includes: Nalgene 50 platinum-cured silicone tubing and TPE vent port cap.

  • Polycarbonate Sterile Erlenmeyer Flask with Dip Tube

    Corning

    …solutions. They are sterile and arrive individually double-bagged and peassembled. The preassembled transfer caps have two ports. One port ends in a 0.2 µm filter, and the other port is chemically resistant, heat sealable flexible tubing, ending in a male Luer lock. The dip tube reaches all…

  • Filling/Venting Closure

    Thermo Scientific Nalgene

    …polypropylene cap with fittings Two 1/2” filling ports and one vent port Autoclavable Two barbed filling ports for 1/2-inch-i.d. tubing and one 3/8-inch-o.d. vent port used with syringe/air filters. Includes polypropylene cap, TPE gasket, three ports, TPE port caps and…

  • HPLC Mobile Phase Cap And Reservoir Systems

    Kimble

    …Hole Cap Systems Economical way to helium sparge and deliver mobile phases Cap body is manufactured from PTFE and is supplied with a TFE/propylene O-ring and a polypropylene screw collar. The connecting threads on the top of the cap use standard 1/4-28 flangeless fittings. Two of the ports have…

  • Barbed Bulkhead Fittings

    Thermo Scientific Nalgene

    For retrofitting closures for liquid transfer (non-vented) Nalge 6149 1/4 or 1/2 inch tubing choice Each fitting kit includes 2 polypropylene fittings, acetal nuts, silicone gaskets and TPE port caps. Autoclavable. Cap not included.

  • Stainless Steel Port Assemblies

    Bellco Glass

    Stainless Steel Port Assemblies are designed for use with Media Storage Bottles for adding & withdrawing media. 3 Port models feature siphon, fill and vent tubes and is supplied with a 45mm Polypropylene blue open top screw cap & white silicone gasket.

  • Stoppers, Cap, Spherical

    Ace Glass

    Cap type stoppers are used to seal unused ports on Air Sampling Manifolds. Use 7670 pinch clamp to secure caps to ports.

  • Caps

    TriForest

    Cap This cap is an ingenious combination of our TriForest septum Cap and vented DuoCAPs™. It provides an additional layer of protection to the standard septum caps. Port Cap Kit (3-Port and 4-Port) Given the multiple port needs of our customers, we have designed the port cap in…

  • Corning® 150mL Easy Grip Polystyrene Storage Bottles with with Dip Tube

    Corning

    …solutions. They are sterile and arrive individually double-bagged and peassembled. The preassembled transfer caps have two ports. One port ends in a 0.2µm filter, and the other port is chemically resistant, heat sealable flexible tubing, ending in a Male Luer Lock. The dip tube reaches all the…

  • Cap Ftng, 45mm, Dual, 1/4" X 6" Straight.

    Corning

    Corning® 45mm Polypropylene Cap, Autoclavable with 2 Stainless Steel Tubing Ports

  • Quick Connect Closures, Venting

    Thermo Scientific Nalgene

    Caps with quick connect/shut off valves Nalge 2158 series Leakproof 83B caps Two port and three port configuration Excellent for vacuum trap type applications Quick filling venting closure system will fit on all Nalgene carboys and large bottles with 83B neck finish.…

  • Tube Fittings, Caps and Plugs

    Swagelok

    Caps close end of fractional tubing Plugs close unused port of fractional tubing Available in brass or stainless steel

  • 5L Erlenmeyer Flasks with Aseptic Transfer Caps

    Corning

    …and storage. Corning 5L Erlenmeyer flasks with aseptic transfer caps protect against adventitious contamination during liquid transfer. The transfer caps have two ports: a port ending in a 0.2 μm filter and a port with chemically resistant, heat sealable flexible tubing ending in a male…

  • Kap-Uts Disposable Closures

    Bellco Glass

    For culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes from 13 to 38 mm Same evaporation and sterility characterisitcs as…

  • Adapter, Stopcock and syringe port

    Ace Glass

    Standard taper adapter with 8-425 gpi threaded top and a 2mm bore stopcock with a ptfe plug. Syringe port is supplied with a cap and septum.

  • E-Z Sampler Complete

    Wheaton

    …polypropylene The E-Z Sampler® has a 39” (100cm) head/shaft assembly and is supplied with a 125mL borosilicate glass bottle with a PTFE lined cap Filling ports are located above the bottle to ensure that it is completely filled to reduce the possibility of air entrapment Bottle has a 33-430…

  • Safe-Lab® Therm-O-Vac® Port Adapter

    Bel-Art Products

    Made from PTFE with Viton® O-ring on the body, screw cap and hose connection. Threads into Adapt-A-Port® body for use in standard taper glassware. NOT autoclavable. Accepts thermometer or straight glass tubing. Includes side mounted vacuum port

  • Nalgene End Caps

    Thermo Scientific Nalgene

    Natural polypropylene Use end caps to securely close off 3/4" or 3" sanitary port Groove on underside of end cap accepts standard sanitary gasket Autoclavable end caps meet USP VI requirements and comply with 21CFR177.1520 for food use

  • 0.6mL MaxyClear Snaplock Microcentrifuge Tubes

    Corning

    …available. SnapLock microtubes have frosted cap surfaces and frosted side panels, ideal for labeling. Each cap features a piercing port in the center of the cap. Will withstand up to 20,000 RCF Snaplock cap assures efficient seal Thin membrane in cap center allows easy access to sample…

  • Vessel, Peptide, Ace-Thred, with Side Port

    Ace Glass

    …O-Ring to make a compression seal in the Ace-Thred on Vessel. Other end of adapter has a 1/4" FNPT thread that allows connection of a 2.5mm bore PTFE shut-off valve with a luer extension. Supplied with a solid cap GL thread. Complete item consists of Vessel, PTFE Adapter, CAPFE O-Ring, and Valve.

  • SYNTHWARE Hickman Still Head, with Side Port

    Kemtech America

    Hickman Still Head, with Side Port, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

  • SYNTHWARE Hickman-Hinkle Still Head with Side Port

    Kemtech America

    Hickman-Hinkle Still Head, with Side Port, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

  • Vessel, Peptide, Ace-Thred, with Side Port

    Ace Glass

    Cylindrical vessel with a 2mm bore PTFE stopcock at top, GPI threaded angled side port, & #15 Ace-Thred at bottom that accepts a PTFE adapter with removable Por. C glass filter disc & a PTFE shut-off valve. PTFE adapter has front type seal using a CAPFE O-Ring to make a compression seal in the #15…

  • Nephelo Flask, No Baffles, Screw Cap

    Ace Glass

    Nephelo culture flask with side port and angled side arm cuvette for standard Nephelometers and spectrophotometers. Supplied with 38-430 phenolic top cap and 18-415 clean-out port cap.

  • Nephelo Flask, Baffled, Screw Cap

    Ace Glass

    …flask with angled cuvette side arm and side clean-out port. Flasks have three outside bottom baffles to promote mixing and oxygen transfer to media. Flasks come with 18-415 side port phenolic cap and 38-430 phenolic top cap. The side arm fits all standard Nephelometers and spectrophotometers.

  • Mp Economy 3 Hole Cap

    Kimble

    The cap body is manufactured from PTFE and is supplied with a TFE/propylene o-ring and a polypropylene screw collar. The connecting threads on the top of the cap use standard 1/4-28 flangeless fittings. Two of the ports have 1/8" through holes, the third port has a 1/16" through hole.

  • Adapter, Septum Inlet, Two Ports

    Ace Glass

    Sampling adapter with standard taper inner joint bottom and o-ring cap-seal septum port at top for handling of air-sensitive materials. Supplied with open-top, 8-425 GPI cap and PTFE faced, silicone septum.

  • TORBAL FSA Cap Torque Gauges

    Scientific Industries

    Torque Cap Tester The FSA TORQUE ranges in capacity from 17lbF.in (2Nm) with a resolution of 0.01lbF.in (0.001Nm) to 100lbF.in (10Nm) with a resolution of 0.1lbF.in (0.01Nm). The FSA TORQUE is ideal for any clockwise and counter clockwise cap torque testing application. Easily test any cap,

  • EVA Collection Bags with MPC Connectors & Vinyl Cap

    Corning cellgro

    … Available in 10L and 20L sizes Film type: EVA Port 1:  Female MPC connector with 1/4" barb + plug, Slide clamp Port 2:  Male MPC connector with 1/4" barb + cap, Slide clamp Port 3:  Vinyl cap, Swabbable valve, Female luer with barb

  • 120mm Diameter Magnetic Drive Cap Assemblies with Fittings

    Corning

    120mm center cap assembly for Proculture® Spinner Flasks. Thomas No. 1197A79 Cap assembly contains two Noryl® 1/4" fitting inserts for stainless steel tubing and two 12mm ports for probes Thomas No. 1230G12 Cap assembly contains two Noryl® 1/4" fitting insert, one…

  • Trypsinizing Flask, Baffled, Sidearm, Screw Caps

    Ace Glass

    …tissue samples into cell suspensions by digestion of connective tissue. Side port has dam below the side arm to prevent undigested tissue from being poured out while decanting cells. Flask has GPI thread top and side arm cap. The three extra deep, extra long side baffles greatly enhance vigorous…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.