Polystyrene Containers

Supplied with white polypropylene screw closures, these “glass-clear” polystyrene jars have many uses in the lab and industry. Lightweight and easy to fill. Maximum temperature polystyrene is 70°C.

The use of clear material guarantees maximum light transmission and thus rapid and successful growth They also make excellent transport containers

The 30mL screw cap container with spoon is ideal for the collection and transport of fecal specimens. Available in transparent polystyrene (PS) or opaque polypropylene (PP), these stool containers come completely assembled and are ready to use.

With attached polypropylene screw cap Clear polystyrene offers clarity of glass and safety of plastic Good resistance to inorganic chemicals 30 to 1000 mL sizes General storage containers are suitable for use with powders and solids.  The large surface area on these jars makes it easy to…

…insulation for a variety of temperature-controlled shipping requirements when combined with Koolit® refrigerants. These lightweight shipping containers provide uniform temperature control and optimal performance for the shipment of your temperature-sensitive products. Knockdowns (KD) are ideal…

Globe's screwcap plastic containers are available in crystal clear polystyrene (PS) or opaque polypropylene (PP). Available in assorted sizes and volumes, these containers are used in every industry.

For blank solutions, reagent solutions or matrix modifiers. This product is not suitable for organic solutions.

Linear Formula: [-CH₂CH(C₆H₅)-]_W(-CH₂CH₂-)_x[-CH₂CH(C₂H₅)-]_y[-CH₂CH(C₆H₅)-]_Z MDL Number: MFCD00134026 Density: …

Available in polypropylene, polystyrene and polyethylene to better fit your laboratory needs Friction-fit type lid Resistant to certain solvents and freezing. Virtually free of trace metals or lubricants.

…labware is a safer alternative to glass without sacrificing accuracy. Universal Containers Working volume: 25mL Outer case available in transparent or opaque material Made of polystyrene with polyethylene caps Available sterile or nonsterile, and with or without a spoon…

Plastic snap cap vials are molded of rigid-wall FDA compliant styrene with tight fitting polyethylene snap-on caps. Plastic snap cap container vials are excellent for storing dry materials, powders, tablets, etc. There are approximately 16 drams per fluid ounce. 7 dram size may be used with…

…produced from a special grade of polystyrene and will resist diluted acids, aqueous solutions, alcohols and bases. The molded hexagonal design provides greater balance protection and safety. They are safe, contaminent-free, biologically inert, economical containers which are excellent for handling…

…offer a multi-compartment container in the shape of a dish and half prefilled with 10% Neutral Buffered Formalin, for holding and transporting biopsies. It is supplied with a leakproof closure with o-ring ensuring total protection of contents. Made of polystyrene. The Simport® CoreDish™…

…offer a multi-compartment container in the shape of a dish and half prefilled with 10% Neutral Buffered Formalin, for holding and transporting biopsies. It is supplied with a leakproof closure with o-ring ensuring total protection of contents. Made of polystyrene. The Simport® CoreDish™…

…offer a multi-compartment container in the shape of a dish and half prefilled with 10% Neutral Buffered Formalin, for holding and transporting biopsies. It is supplied with a leakproof closure with o-ring ensuring total protection of contents. Made of polystyrene. The Simport® CoreDish™…

Synonyms: AM resin MDL No.: MFCD00130502 Appearance: Pale to yellow beads Comments: Used functionalized supports for solid-phase synthesis. Many supports can be made by acylating this resin with carboxylic acid-containing linkers using standard amide bond-formation methods. DVB: 1% DVB …

MTC Bio Weigh Boats are made of antistatic polystyrene and will withstand temperatures to 90°C, as well as exposure to diluted acids, alcohols, bases and aqueous solutions. Their flexibility and smooth interior surfaces with rounded corners allow for easy decanting of powdered samples. Their…

… MDL No.: MFCD00130502 Appearance: Pale to yellow beads Comments: This resin can be easily acylated with any appropriate carboxylic acid containing linkers using standard methods of amide bond formation to furnish supports for Boc and Fmoc batch solid phase organic synthesis. DVB: 1% DVB …

…premium-grade polystyrene and are for use in routine laboratory analysis and procedures. Polystyrene tubes provide clarity and are appropriate for use with mild acidic (except oxidizing acids) or alkali solutions, alcohols (except higher alcohols) and salt. Polystyrene material contains fewer…

Straight-side polystyrene containers with 180 ml capacity, supplied with white polypropylene screw closures. These "glass-clear" polystyrene jars have many uses  in the lab and industry. Lightweight and easy to  fill. Maximum temperature is 70ºC.

Enable samples of liquid or powder to be taken and sent for testing in the same container, eliminating risk of cross contamination. Sterile Available in blue and clear The handle can be neatly snapped off once the sample has been taken. All Dippas come individually wrapped and…

Produced from Polystyrene (PS), these economical collection cups are packaged in sleeves of 100. They do not have a lid and are ideal for immediate collection and testing.

…offer a multi-compartment container in the shape of a dish and half prefilled with 10% Neutral Buffered Formalin, for holding and transporting biopsies. It is supplied with a leakproof closure with o-ring ensuring total protection of contents. Made of polystyrene. The Simport® CoreDish™…

…laboratories, physicians' offices and nursing homes throughout the world. The kit consists of five plastic bags each containing: 100 flared top or rimmed polystyrene centrifuge tubes 100 polyethylene (PE) snap caps 100 adhesive patient I.D. labels 100 collection cups (3.5oz) Optional…

…offer a multi-compartment container in the shape of a dish and half prefilled with 10% Neutral Buffered Formalin, for holding and transporting biopsies. It is supplied with a leakproof closure with o-ring ensuring total protection of contents. Made of polystyrene. The Simport® CoreDish™…

…offer a multi-compartment container in the shape of a dish and half prefilled with 10% Neutral Buffered Formalin, for holding and transporting biopsies. It is supplied with a leakproof closure with o-ring ensuring total protection of contents. Made of polystyrene. The Simport®…

…May cause long-term adverse effects in the aquatic environment. Safety Phrases: 24-37-60-61 Avoid contact with skin. Wear suitable gloves. This material and/or its container must be disposed of as hazardous waste. Avoid release to the environment. Refer to special instructions/Safety data sheets

…variety of assays including enzyme, receptor-ligand and cell-based on these plates. The plates are demarcated in a 8 x 12 array with each square containing 16 wells and eight extra wells on both the left and right sides of the plate can be used to run controls. A series of notches allow stacked…

Bottles are manufactured from virgin polystyrene, caps from high density polyethyleneBoth resins meet the USP Class VI requirements for plastic containers and closures Treated for optimal cell attachmentOne piece seamless construction with printed graduationsPrinted lot numbers to aid in product…

…in crystal clear polystyrene (PS) or unbreakable polypropylene (PP), each cup has clear graduation marks that are molded into the plastic offering measurements in both milliliters (ML) and ounces (OZ). The cups are packaged 25 per sleeve, 20 sleeves per case (500 containers per case). They are…

To be used with Tubing Set (Cat. No. 10043) Bottles are manufactured from virgin polystyrene, caps from high density polyethylene Both resins meet the USP Class VI requirements for plastic containers and closures USP Class VI certified C-FLEX® tubing One piece seamless construction with printed…

…racks. 24 Hour Urine Container This 3000 mL polyethylene container features easy-to-read graduations, a convenient carrying handle and an amber color for UV-protection. The plastic cap has an extra-thick F-217 liner to prevent leakage. The containers are easily stored and use minimal…