Polystyrene Bottles

Compare Tool

Select up to 3 products

Polystyrene Bottles
1 - 32 of 105
Sort
View
Show


  • Sterile Coliform Bottles

    Greenwood Products

    120mL Clear Polystyrene Bottle 100mL Fill Line with 10mg Sodium Thiosulfate Pill Shrinkwrap Sterile

  • …wide bottle opening for easy access and pouring of your samples, and the funnel is manufactured from optically clear polystyrene. The bottle and filter adapter are manufactured from 100% virgin polypropylene. Filtration bottle tops without receiver bottles are also available. The bottle

  • Rigid Clear Polystyrene Jars offer glass-like clarity with a smooth surface that is slip-resistant. Jars are ideal for storing and collecting specimens and lab supplies. Wide neck and straight sides facilitate easy recovery of contents. Purchase closures separately.

  • … Screw cap reduces leakage High quality polystyrene Quality bottle and cap configuration has been designed to reduce leakage from the sample site to the laboratory. Vial is marked indicating the 100 mL line to aid in taking samples. Bottles will not fluoresce under black light. Available…

  • Polystyrene media/filler bottles Economical Easy-to-read graduations Sterile Available with low profile, easy grip handle (pictured) and traditional smooth sides Disposable plastic storage bottles are made from optically clear polystyrene and are ideal storage containers…

  • Nalgene Polystyrene Centrifuge Bottles

    Thermo Scientific Nalgene

    Polystyrene conical bottom bottles RCF to 5,800 x g Withstand temperatures of +20° to +90°C Sterile Conical bottom Bottles include 58 mm HDPE caps. Dimensions (o.d. x H, mm): 61.5 x 126.5. * Sale price valid only on current stock. Additional units may be…

  • Solvent Filtration Disposable Vacuum Bottle Top Filters

    labForce® (a Thomas Scientific Brand)

    …any vacuum-capable GL45 threaded bottle. Simply plug the filter onto your vacuum line, and begin filtering your solvent without any complex setup. The FDA-grade Polypropylene housing provides vastly improved chemical compatibility over the usual Polystyrene bottle top filter. The labForce…

  • Supplied with white polypropylene screw closures, these “glass-clear” polystyrene jars have many uses in the lab and industry. Lightweight and easy to fill. Maximum temperature polystyrene is 70°C.

  • Can be used with Corning bottle top filters These polystyrene bottles are ideal for storage of media, buffers and other aqueous solutions. Bottles are sterile and certified nonpyrogenic. Plug seal caps provide an airtight seal and help minimize the risk of contamination.

  • Bottles are manufactured from virgin polystyrene, caps from high density polyethyleneBoth resins meet the USP Class VI requirements for plastic containers and closures Treated for optimal cell attachmentOne piece seamless construction with printed graduationsPrinted lot numbers to aid in product…

  • Solution Bottles

    Celltreat Scientific

    CELLTREAT Solution Bottles are ideal for storage of media, buffers, and other aqueous solutions. The bottles are manufactured from polystyrene, available in 150, 250, and 500 ml volumes, and are packaged in individual easy to open plastic bags. The Solution Bottles feature heavy wall construction,…

  • …serum, and buffers. The polystyrene bottles are optically clear, have low extractable substances and have good alcohol compatibility. They are available radiation sterilized and are an ideal choice for storage of liquids used in tissue culture. Each Autofil™ bottle has features that…

  • Roller Bottles

    Corning

    …and superior optical clarity. Made from virgin polystyrene. Heavier walls, non-serrated traction rings and printed graduations every 50 mL to 1,500 mL, make this bottle very convenient to use. Also available in bulk pack. The 1750 cm 2 bottle features a quick seal cap and printed graduations.…

  • Rigid Clear Polystyrene Jars offer glass-like clarity with a smooth surface that is slip-resistant. Jars are ideal for storing and collecting specimens and lab supplies. Wide neck and straight sides facilitate easy recovery of contents. Attached PP SturdeeSeal® PE Foam Lined Caps are known for…

  • Storage Bottles

    NEST Scientific USA

    …for separation and purification of large volume samples. The whole set includes membrane diaphragm, a graduated, transparent polystyrene funnel connected to a receiving bottle by a connector. The disposable vacuum filter utilizes a vacuum pump to provide pressure differentials for processing large…

  • Made of polyethylene Plug type push-in caps and 2-position snap caps are made of polyethylene for test tubes with outside diameters of 12 or 17 mm. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological…

  • …cell attachment Polystyrene construction Easy-Grip vent cap Printed lot numbers aid product traceability Corning® CellBIND roller bottles feature a ribbed design that provides twice the surface area with the same exterior dimensions. Bottles are treated with the patented…

  • CAS: 9003-53-6 MDL No: MFCD00084450 Powder Linear Formula: [-CH2CH(C6H5)-]n

  • Rigid Clear Polystyrene Jars offer glass-like clarity with a smooth surface that is slip-resistant. Jars are ideal for storing and collecting specimens and lab supplies. Wide neck and straight sides facilitate easy recovery of contents. Attached unlined polypropylene caps are known for good…

  • CAS: 9003-53-6 MDL No: MFCD00084450 Powder Linear Formula: [-CH2CH(C6H5)-]n

  • …and low extractables and are best for filtering cell culture media Receiver bottles feature easy grip sides for improved handling Additional storage bottles can be purchased to increase capacity Bottle caps are supplied sterile and individually packaged Angled hose connector simplifies…

  • Made from optically clear polystyrene Sterilized to SAL 10 -6 Corning polystyrene Storage Bottles are now available as closed system solutions. They are sterile and arrive individually double-bagged and peassembled. The preassembled transfer caps have two ports. One port ends in a…

  • Autofil™ PETG Storage Bottles

    Foxx Life Sciences

    polystyrene storage bottles. The bottles are gas impermeable, available radiation sterilized, and are an ideal low cost choice for general laboratory solution storage. Each Autofil™ bottle has features that improve the handling of the bottle, especially when the bottle is wet. The bottle

  • Bottle Top Filters

    Celltreat Scientific

    …room, from USP class VI virgin polystyrene. The filter membrane is Polyethersulfone (PES) material in 0.22µm or 0.45µm pore sizes for rapid flow rate and low protein binding. Bottle top filters are compatible with 45mm neck bottles.  The bottle top filters are sterile (gamma…

  • …removal. These new 1000mL Systems are designed for filtering and storing cell culture media, biological fluids and other aqueous solutions. The new system consists of a 1000mL polystyrene receiver bottle and filter funnel with a 54.5cm² membrane and a polyethylene neck adaptor with hose connector.

  • Corning® Vacuum Filter/Storage Bottle Systems are designed for filtering and storing cell culture media, biological fluids and other aqueous solutions. The systems consist of a 1000mL polystyrene receiver bottle and filter funnel with a 0.22 µm pore 54.5cm² cellulose nitrate membrane…

  • …0.22 µm (sterilization grade) and 0.45 µm (clarification grade) PES membranes. The complete system is composed of a polystyrene filter funnel and receiver bottle, a SECUREgrasp cap, and a vacuum hose adapter. Systems with 15 mL and 50 mL polypropylene centrifuge tubes are also available.…

  • …analysis method or equivalent. Screw-Top Sterile Coliform Water Sample Bottles are available in a variety of sizes and materials, with or without sodium thiosulfate for sample dechlorination.  Polystyrene (PS) bottles are optically clear for easy sample viewing Threaded screw closure…

  • To be used with Tubing Set (Cat. No. 10043) Bottles are manufactured from virgin polystyrene, caps from high density polyethylene Both resins meet the USP Class VI requirements for plastic containers and closures USP Class VI certified C-FLEX® tubing One piece seamless construction with printed…

  • CAS: 9003-53-6 MDL No: MFCD00084450 Powder Linear Formula: [-CH2CH(C6H5)-]n

  • Greiner Bio-One roller bottles with a smooth or ribbed surface are made of polystyrene or PET, range in size from 850 cm² to 4250 cm² growth area and are available either with standard or filter screw caps. The filter membrane is a hydrophobic capillary pore membrane with a defined pore…

  • Greiner Bio-One roller bottles with a smooth or ribbed surface are made of polystyrene or PET, range in size from 850 cm² to 4250 cm² growth area and are available either with standard or filter screw caps. The filter membrane is a hydrophobic capillary pore membrane with a defined pore…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.