Polypropylene Filtering Flask

Polypropylene flasks are molded in one piece to withstand full vacuum to 30" Hg Oval marking area Autoclavable Tubulation at 45° angle prevents tipping. Barbed adapter accepts 1/4" to 3/8" I. D. tubing

…Spinner Flasks (Cat. No. 3561) Cap is made of high density polyethylene; autoclaving is not recommended The venting port ends in a 25mm diameter vent filter with a 0.2µm pore PVDF membrane and a barbed fitting The liquid transfer port has an internal end with a rigid polypropylene dip…

For use with round bottom flasks up to 10,000ml. Ribbed to hold flasks securely in place. Stackable. Autoclavable. Excellent chemical resistance. 6 3/4" Diameter and 2" High

These flasks, also called vacuum flasks, have a side-arm with a 45° downward angle to prevent tipping.   Reduce broken glassware with this flask constructed of FDA grade polypropylene Side Arm accepts flexible tubing from 3/8" to 1/2" I.D. 1000 ml capacity

Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted. Useful when connecting a vacuum line to a filter flask Recommended maximum pressure 20psi (1034 Torr) Autoclavable

…through the SPE tubes, preventing contamination of the vacuum pump. The easily assembled kit contains a polypropylene filtering flask, a one-hole rubber stopper, 4 in. (10 cm) of polypropylene tubing and 5 ft. (1.5 m) of red rubber vacuum hose. The volume capacity of the Trap is approximately 1 L.

Heavy wall, bottle shaped, filtering flask with removable polypropylene hose connection. Offered plain or plastic coated. Order 6989-40 for replacement hose connection assembly consisting of PBT hose connection, EPDM o-ring, VMQ silicone seal, PP screw

… Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed polypropylene filter support provides sufficient clearance so the…

Disposable filter funnel for solid-liquid separation can be used in chemistry and biological laboratories. The molded funnel has a 10 micron polyethylene fritted disc. Polypropylene filter funnel is designed for use with the CG-1049-J style glass vacuum adapter and a flask or vial. The CG-1049-J…

…unique disposable filter funnel system for solid-liquid separation can be used in chemistry and biological laboratories. The system consists of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The…

Analytical Filter Funnel, Polystyrene; Cellulose Nitrate (C.N.) Membrane CONTAINS FILTERS ONLY Nalge 140 47 mm diameter filter with grid Ideal for use with filtering flasks or manifolds Convenient snap-away design with removable membrane; funnel marked at 100 mL …

…flask kits come complete with twelve (12) polypropylene 300ml No-Baffle flasks, twelve (12) two piece caps, and five (15) filter linings. SS-2002C & SS-2002S flask kits come complete with twelve (12) polypropylene 300ml Full-Baffle flasks, twelve (12) two piece caps, and five (15) filter…

…in .22µm and .45µm. Our flasks have a wide bottle opening for easy access and pouring of your samples, and the funnel is manufactured from optically clear polystyrene. The bottle and filter adapter are manufactured from 100% virgin polypropylene. Filtration bottle tops without…

…unique disposable filter funnel system for solid-liquid separation can be used in chemistry and biological laboratories. The system consists of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The…

…unique disposable filter funnel system for solid-liquid separation can be used in chemistry and biological laboratories. The system consists of a polypropylene filter funnel with silica gel/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The CG-1049-J…

…suspended above bottom of flask. Access to contents of assembled flasks provided by screw-cap side arms, attached at offset angle to allow insertion of pipet or probe without striking impeller shaft. Side arms are 9 mm i.d. and are suitable for decanting, filtered vent, inoculation, installation…

…accessories with vessels to help transfer liquid aseptically. The internal end is a rigid polypropylene dip tube designed to reach the bottom of the flask. The venting port ends in a 50mm diameter vent filter with a 0.2 µm pore PVDF membrane and a barbed fitting. The liquid transfer port uses…

Gently introduces bubbles into vessels. Includes 45mm polypropylene cap and white silicone gasket. 316l stainless steel 20 ra finish Size: 36l 12mm od coarse glass frit 0.2um Acrodisc filter w/ hose fitting

Gently introduces bubbles into vessels. Includes 45mm polypropylene cap and white silicone gasket. 316l stainless steel 20 ra finish Size: 3l 12mm od coarse glass frit 0.2um Acrodisc filter w/ hose fitting

…bottles. Venting port ends in a 50mm diameter vent filter with a 0.2µm pore PVDF membrane and a barbed fitting Liquid transfer port has an internal end with a rigid polypropylene dip tube angled to reach the bottom of the flask and on the external side a 1/8 inch ID (3.2 mm), 1/4…

…vessels with expensive stainless steel headplates. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a 45mm polypropylene sealing cap. Gas filters have 0.2(u)m pore PTFE membranes. Stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with…

…other macromolecule re-precipitation techniques. All in one system with integrated pump 2L autoclavable polypropylene trap flask Fitted with hydrophobic microbiological filter Vacuum pressure: -200 to -800mbar (adjustable) Overflow protection - liquid level sensor detects excess…

Gently introduces bubbles into vessels. Includes 45mm polypropylene cap and white silicone gasket. 316l stainless steel 20 ra finish Size: 6-15l 12mm od coarse glass frit 0.2um Acrodisc filter w/ hose fitting

…Simply plug the filter onto your vacuum line, and begin filtering your solvent without any complex setup. The FDA-grade Polypropylene housing provides vastly improved chemical compatibility over the usual Polystyrene bottle top filter. The labForce Solvent Filtration vacuum filters are a safe…

…life of the final filter and allow easier filtering of larger volume of difficult samples. Typically used to filter salt solutions, cleaning/rinsing solutions, irrigation solutions, immunologicals, virus suspensions, buffers, nutrients and other aqueous solutions. Polypropylene housing with all…

…filters. Graduations up to 350 mL in 50 mL intervals. The No. 8 stopper mounts in a standard 1 liter filtering flask or in multi-position manifolds. The polysulfone unit has a dustcover, is autoclavable and chemically resistant for cell culture and microbiological applications. The polypropylene…

…poured down the laboratory drain. The Extractor funnel device fits most standard laboratory flasks and bottles (neck size 33-45 mm), and the unit includes a cap for storage between uses. The polypropylene housing is chemically resistant to organics. Also included in the package are glass fiber…

Transparent Autoclave bags are made of two-millimeter-thick Polypropylene (PP) and are used for steam cleaning used petri dishes, membrane filters, cell culture flasks, pipettes, culture plates and other autoclavable products.

…unique disposable filter funnel system for solid-liquid separation can be used in chemistry and biological laboratories. The system consists of a polypropylene filter funnel with a 10 or 40 micron polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The CG-1049-J…

… Polypropylene, L-shaped, with "O"-ring One end fits into top of channels on Nunc Cell Factories, opposite end serrated to take tubing 6- to 10-mm (1/4 to 3/8 inch) bore Packaged under aseptic conditions Accessories (9383W14, W16, W84) Sterile Bacteria Air Filter …