Polyethylene Vial

Compare Tool

Select up to 3 products

Polyethylene Vial
1 - 32 of 130
Sort
View
Show

Simport

  • Polyethylene Vials with Caps

    SPEX SamplePrep

    Polyethylene Vial w/SlipOn Cap, 1 x 3 in.: For wet or dry mixing. Vial size 1 in. (2.54 cm) diameter x 3 in. (7.62 cm) long. Includes polyethylene slip-on cap. Volume 35 mL; mixing load approximately 15 mL. For use with SPEX SamplePrep 3112 or 8006A methacrylate balls. Polypropylene Vial

  • Low-Density Polyethylene Sample Vials

    Thermo Scientific Nalgene

    Supplied with snap-on caps. Capacities with o.d. x height given below.

  • Scintillation Vial, High-Density Polyethylene

    Dynalon

    Scintillation vials. Special grade of high density polyethylene achieves the best counting efficiency with lowest background. Quick fitting leakproof closure with quick-twist thread.

  • Polyethylene Screw Cap Scintillation Vials

    DWK Life Sciences (Wheaton)

    …containing 5 trays of 100 vials. 9718J15 vials include 9718H72 caps of urea, size 22, with metal foil liners. 9718J20 vials include 9718J25 caps of polyethylene, size 22, without liner. “PET” Plastic Scintillation Vial (9718J50) Vials are polyethylene terephthate (PET); caps are…

  • Polyethylene Screw Cap Scintillation Vials

    DWK Life Sciences (Kimble)

    …see Thomas number 9718G76. Vials with foamed polyethlyene lined caps (9718K60) Similar to 9718K15, but cap has foamed polyethylene liner Caps are packaged separately in bags of 100. Vials with linerless polyethylene plug caps (9718K62) Polypropylene vials Size: 4 mL Bulk-packed Caps…

  • Polyethylene Snap Plugs With Starburst

    J.G. Finneran

    Flat polyethylene seal is pre-scored with starburst design to allow easier penetration and provide better resealing. Plug is designed to easily push in and remove from the vial while still having a tight fit.

  • Polyethylene Snap Plugs with Starburst

    J.G. Finneran

    …of plug after use. Plug is designed to easily push in and remove from the vial. Tight fit offers good sealability. The 15mm Snap Plug has a pre-scored starburst to offer a penetration aid for dull or thick needles. Plug is designed to easily push in and easily be removed from the vial.

  • Autosampler Polyethylene Snap-Cap for 11mm vials

    PerkinElmer

    Autosampler Polyethylene Snap-Cap for 11mm vials, Pkg 1000

  • Autosampler Polyethylene Press-on Cap for 20mm vials0

    PerkinElmer

    Autosampler Polyethylene Press-on Cap for 20mm vials, Pkg 250

  • Vials 2 mL conical,polyethylene, 1000/pk

    Agilent Technologies

  • Polyethylene Press On Caps for 11 mm o.d. Vials

    PerkinElmer

    Polyethylene Press On Caps for 11 mm o.d. Vials, Pkg 1000

  • Shell Vials, Clear N-51A Borosilicate Glass, with White Polyethylene Plug Style…

    DWK Life Sciences (Kimble)

    These shell vials are ideal for chromatography applications. White polyethylene plug style needle closures, unattached Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

  • Lead Lined Polyethylene Box

    Bel-Art - SP Scienceware

    …or lead. 0.76mm thick lead shield encased in 6.4mm thick high-density polyethylene helps contain radiation without lead exposure. Includes cover w/ 32mm (11⁄4") external overlap. Excellent for storing vials of isotopes, contaminated instruments and tools, radioactive samples,…

  • Scintillation Vials

    Globe Scientific

    …The 6.5mL Scintillation Vials are securely sealed by simply snapping the caps on. The cap is conveniently removed with an easy 1/4 turn to the left. The 4mL Polyethylene Scintillation Vial uses a full turn polyethylene screw cap. This small volume scintillation vial is the most economical size…

  • Scienceware® Polyethylene Test Tube Racks

    Bel-Art - SP Scienceware

    Cylindrical wells for tubes, vials, bottles, centrifuge shields, etc. Stable, one-piece construction Versatile racks offer wells and drying pins

  • Disposable Polyethylene Frit Filter Funnels

    Chemglass

    …of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The CG-1049-J vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates from being…

  • Disposable Polyethylene Frit Flared Top Filter Funnels

    Chemglass

    …of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The CG-1049-J vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates from being…

  • Limited Volume Inserts

    labForce (a Thomas Scientific Brand)

    labForce Brand Limited Volume Inserts are ideal for sampling small volumes using a labForce 12x32mm vial for support. Inserts are pre-assembled with a polyethylene spring which aids in alignment. Manufactured from Type I borosilicate glass Conical design permits complete sample removal …

  • 8x40mm Shell Vial Kits

    National Scientific

    Original 1mL shell vial for the Waters™ 96-position tray Manufactured from superior quality borosilicate glass Polyethylene SepCap with starburst center design eases syringe needle penetration Convenient vial kits include equal quantities of vials and caps

  • Blood Dilution Vials

    Globe Scientific

    Polystyrene (PS) cell counter cups come with a polyethylene (PE) snap on lid. The cups are graduated at the 10mL and 20mL marks.

  • Snap Cap Vial Containers

    Dynalon

    Plastic snap cap vials are molded of rigid-wall FDA compliant styrene with tight fitting polyethylene snap-on caps. Plastic snap cap container vials are excellent for storing dry materials, powders, tablets, etc. There are approximately 16 drams per fluid ounce. 7 dram size may be used with…

  • Vials

    I-Chem

    …recommended for UV-light sensitive samples. Vials 9711J04 through J09 come with a Septa-Gard™ polyethylene friction-fit snap cover that fits over the vial to provide additional protection against airborne contamination. I-CHEM 300 series vials are processed, assembled and packaged in strict…

  • Vials and Vial Sets for the 2000 Geno/Grinder®

    SPEX SamplePrep

    …foam vial holder. Carrier fits Geno/Grinder clamp; used in pairs. Grinding load per vial 1.5 mL. Vials can also be used with 2663 Cryo-Block or 2190 Vial Rack. Case of 10 sets, each set containing 24 vials pre-loaded with steel balls. 2241-PE Polyethylene Vial : 5 mL polyethylene vial with…

  • CryoClear™ Cryogenic Vials

    Globe Scientific

    …at 95 kPa (0.95 bar, 14 psi) Material: Tube: Medical grade polypropylene (PP) Cap: Medical grade polyethylene (PE) co-molded with thermoplastic elastomer (TPE) WARNING : Do not use CryoClear™ vials to store specimens in the liquid phase of liquid nitrogen.

  • Ball and Vial Sets

    SPEX SamplePrep

    …3114 Vial Set. Polystyrene Vial w/Slip-On Cap, 0.5 x 2 inch: 1/2 in. (12.7 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 5 mL; mixing load approximately 2 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Polycarbonate Vial w/Slip-On…

  • Threaded Closures for Dram Vials

    J.G. Finneran

    F217 is a triple layer liner that consists of a foamed polyethylene core between two layers of virgin low-density polyethylene. The liner is faced with another layer of PTFE (polytetrafluoroethylene). The lined polypropylene closures have excellent chemical resistance, a low moisture transmission…

  • Dropping Bottles in Vial File®

    DWK Life Sciences (Wheaton)

    Contains 40 - 3mL LDPE (Low Density Polyethylene) bottles Assembled with dropper tip and cap attached to bottle Average drop size is 44uL +/- 6uL Packaged in a reusable plastic case Extended controlled dropper tip dispenses one drop at a time Alphanumerical indexing of contents…

  • Vial Shell w / Wht PE Plug 2ml 00

    DWK Life Sciences (Kimble)

    These shell vials are ideal for chromatography applications. White polyethylene plug style needle closures, unattached Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

  • Sample Vials, Screw Thread, Clear KG-33 Borosilicate Glass, with Black Phenolic…

    DWK Life Sciences (Kimble)

    x65mm, 15-425 thread

  • 7mL Vial with Pierce Cap for Dionex® AS50

    Environmental Express

    …screw cap vial for AS-50 and AS-AP autosamplers. Our product is the same height and diameter as the OEM product. This product has a 0.012" pierce cap that is easily punctured by the sampling probe during analysis. The cap is molded of low density polyethylene. The vial is molded polypropylene…

  • Vial Shell w / Wht PE Plug 1ml 00

    DWK Life Sciences (Kimble)

    These shell vials are ideal for chromatography applications. White polyethylene plug style needle closures, unattached Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.