Polyethylene Tubing

Compare Tool

Select up to 3 products

Polyethylene Tubing
1 - 32 of 274
Sort
View
Show
  • Low-Density Polyethylene Tubing

    Thermo Scientific Nalgene

    …8010 Translucent; non-contaminating Less flexible than vinyl tubing, but with superior chemical resistance Tubing has sufficient flexibility and resilience to make a tight joint on glass or metal tubing; attachment is made easier if end is first softened by dipping into boiling…

  • Tubing, Low-Density Polyethylene

    Dynalon

    Low-density polyethylene tubing. Non-toxic, translucent virgin  polyethylene. Contains no plasticizers, chemically inert. Not affected by most acids or alkalies. Will remain flexible with aging.

  • Intramedic Lower Density Polyethylene Micro Bore Tubing

    BD

    …additives Waxy, white, translucent, tasteless, odorless Lower density polyethylene micro bore tubing is flexible, but rigid enough for applications using vacuum and pressure. Durable over a wide temperature range, tubing maintains its form to 104°C and becomes brittle at -60°C. It can be…

  • Tubing, Low-Density Polyethylene .140 Od

    Dynalon

    …(l x w x h) : 1200x0.138x0in Tubing , low-density polyethylene .045" I.D. Non-toxic, translucent virgin polyethylene. Contains no plasticizers, chemically inert. Not affected by most acids or alkalies. Will remain flexible with aging. ( 1212W97) is a special small bore tubing.

  • Corning® 96 Well Polyethylene Cluster Tube 8-Cap Strips, 12 Strips per Bag,…

    Corning

    Polyethylene 8-cap strips are designed to fit 1.2mL cluster tubes and cluster tube strips.

  • Beckman® Type Microcentrifuge Tubes

    Globe Scientific

    These 500uL (0.5mL) Beckman® Type microcentrifuge tubes with attached cap are non-graduated. The tubes are made from polyethylene and are not autoclavable. The tubes are sold in bags of 1000.

  • Scienceware® Polyethylene Drying Tubes

    Bel-Art Products

    Drying tubes with tube fittings can be filled with desiccant of your choice. Each tube is supplied with two polypropylene fittings with serrated tapered end that accept 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing Unbreakable polyethylene straight tubes; 16mm I.D. x 19mm O.D. (5/8 x…

  • T Connector Tubing Adapters

    Foxx Life Sciences

    Foxx Life Sciences T connectors are available in a variety of standard sizes. Our NPT threaded and barbed tees offer strength and durability. Made from Polyethylene.

  • 15 & 50mL Disposable Plastic Centrifuge Tubes

    Corning

    tubes are available in two standard materials: polypropylene (PP) and polyethylene terephthalate (PET). Polypropylene tubes provide excellent chemical resistance and mechanical strength. They are strong, moderately rigid, and well-suited for most disposable centrifuge applications. PET tubes offer…

  • Tubing Pe190 36In Sterile 12 Pk

    BD

  • Liquid Phase Immunoassay Tubes

    Thermo Scientific Nunc

    MiniSorp surface Molded from special polyethylene formulation For liquid phase immunoasssays, including RIA, for storing of reagents, or collecting chromatographic fractions Mini-Sorp™ is a polyethylene-based material that provides a low-binding surface.

  • Round Bottom Polyethylene Tubes

    Greiner Bio-One

  • Conical Bottom Centrifuge Tubes

    Bel-Art Products

    Chemical and corrosion resistant Conical bottom 15ml polyethylene tubes with rim  Molded in graduations Useful for refrigerated use and continuous temperatures up to 52°C (125°F) Capacity: 15ml O.D.: 17mm Length: 117mm

  • Conical Centrifuge Tubes

    Simport

    tubes Chemically clean Metal-free Tubes resist speeds of up to 5,000 rpm Ready-to-use and uniform in size and shape, measuring 17 x 120 mm. Graduations are at 0.25, 0.5, 1.0, 2.5, 5, 10, 12 and 15 mL. 17 mm outside diameter Plug type push-in caps are made of polyethylene for test tubes with…

  • Quick Disconnect Tubing Couplings

    Thermo Scientific Nalgene

    High-density polyethylene Friction-fitting members form a readily demountable joint for connecting flexible tubing Quick disconnect tubing couplings provide a safe, convenient means for rapid attachment and disconnection of filtering flasks, manometers, etc. Each member has a heavy flange for…

  • Polyethylene Caps and Stoppers for Conical Centrifuge Tubes

    Simport

    17 mm outside diameter Plug type push-in caps are made of polyethylene for test tubes with outside diameters of 17 mm. Dual position caps can be closed but not sealed so that samples are maintained aerobic for microbiological procedures, or caps can be pushed tight and fully sealed for…

  • Cryoflex Tubing

    Thermo Scientific Nunc

    Heat-Shrink Tubing Safely encapsulates tube Easy to apply and remove Recommended when CryoTube® vials are to be used to store all samples for liquid nitrogen or ultra-low temperature cabinets. Polyethylene sleeves 14 mm id x 500 mm long. Cut to fit individual tubes or for use as…

  • Polyethylene Stopper Caps

    Evergreen Scientific

    Polyethylene stopper caps to fit a variety of general purpose test tubes

  • Scienceware® Polyethylene Test Tube Racks

    Bel-Art Products

    Cylindrical wells for tubes, vials, bottles, centrifuge shields, etc. Stable, one-piece construction Versatile racks offer wells and drying pins

  • Carboy, Low-Density Polyethylene Tubing & Clamp 6.5 Gallon

    Dynalon

    Carboy, with tubing and clamp low-density Polyethylene 6 1/2 gallon capacity  Heavy duty low-density Polyethylene carboys with 5 ft. of vinyl food grade  tubing (1085 series). Supplied with 1/4" I.D. x 5/8" O.D. tubing and a 12 position Dura-Clamp(TM) ( 1212X09 ) attached.…

  • Disposable, Polyethylene Culture Tube Stoppers

    Thermo Scientific Nunc

    Plug-seal type Packaged under aseptic conditions

  • 16mm Plug Caps

    Globe Scientific

    Fits most 16mm tubes Polyethylene (PE) Assorted colors available

  • 16mm Flanged Plug Cap

    Globe Scientific

    Fits most 16mm tubes Polyethylene (PE) Assorted colors available

  • Rack Test Tube, High-Density Polyethylene

    Dynalon

    Test Tube Racks. High-density polyethylene. 2 tier racks hold 10 tubes and 3 tier racks hold 12 or 24 tubes. Lightweight, unbreakable test tube rack. Molded of high density polyethylene. Will withstand  temperatures up to 110° C. Three-tier racks have legs to raise them from table.…

  • Polyethylene (PE) Frit, 20 µm porosity for use with 1mL SPE Tube

    MilliporeSigma

    Packaging: ~ pk of 216 Pore Size: 20 μm Compatibility: for use with 1mL SPE Tube

  • Polyethylene Strip Caps

    Thermo Scientific Nunc

    Eight-well strip cap configuration fits most 96-well MicroWell® Plates Flexible Polyethylene provides a positive seal for each well Shallow depth of cap permits maximum utilization of well volume Each cap can be separated from strip for individual well usage and storage. Both…

  • Reducer Tubing Adapters

    Foxx Life Sciences

    Foxx Life Sciences connectors are available in a variety of standard sizes. They provide a secure, watertight connection. These connectors make it possible to connect two hoses, securely and efficiently. Made from polyethylene.

  • Polyethylene (PE) Frit, 20 µm porosity for use with 6mL SPE Tube, pk of 60

    MilliporeSigma

    Description: for SPE Tube Packaging: pk of 60 Pore Size: 20 μm Compatibility: for use with 6mL SPE Tube

  • C Columns

    GE Healthcare

    …for precise temperature control. Packing reservoirs for each column diameter optimize packing conditions. C columns are delivered with polyethylene tubing (1.0-mm ID, 2 m in length), bed support screens, snap-on net rings, and instructions. Columns are available in three diameters and several…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.