Polyethylene Caps

Compare Tool

Select up to 3 products

Polyethylene Caps
1 - 32 of 508
Sort
View
Show
  • …a 33 mm cap having a Male MPC end cap with a 3/8” (9.5 mm) ID Female MPC coupling. 1234H53 is a 33 mm polyethylene threaded cap with a Female MPC end cap with a 1/4” (6.4 mm) ID Male MPC coupling. 1234H54 is a 33 mm polyethylene threaded cap with a Female MPC end cap with a …

  • Black Phenolic Caps

    DWK Life Sciences (Kimble)

    Screw threads Choice of six liners

  • Polyethylene Stopper Caps

    Evergreen Scientific

    Polyethylene stopper caps to fit a variety of general purpose test tubes

  • Red polyethylene cap Leakproof screw cap From 60 to 180 mL Sterile 10 -6

  • Dual Position Snap Caps

    Globe Scientific

    …dual position caps are produced from low density polyethylene (LDPE) and is ribbed for easy handling. The cap is specially designed to provide aerobic or anaerobic storage of culture samples. When snapped into the tube, the cap provides a leak-resistant seal. Note: Leave the cap in the loose…

  • …outside diameter Plug type push-in caps are made of polyethylene for test tubes with outside diameters of 17 mm. Dual position caps can be closed but not sealed so that samples are maintained aerobic for microbiological procedures, or caps can be pushed tight and fully sealed for…

  • Leakproof, rigid and translucent these high density polyethylene 2000 mL wide mouth lab bottles have excellent chemical resistance. Ideal for storage and handling of liquids or solids. Made with FDA approved resin for non-contaminating storage of chemicals and food grade products. Bulk packed with…

  • Caps for Sample Cups

    Globe Scientific

    These caps are designed specifically for use on our popular line of multi-purpose sample cups and are produced from polyethylene (PE). The caps are available with a solid or cross-cut pierceable top and they snap securely in place on each of the sample cups.

  • These blue PYREX® polyethylene caps provide an economical closure for some volumetric flasks (See Nos. 5580, 5581 and 5600).

  • The cylindrical jars are supplied with insert and cap.  Thanks to the large neck they are suitable for powders and  solid specimen.

  • Durable square bottles made from high-density polyethylene (HDPE) with low-density polyethylene (LDPE) screw caps. V94189 is made of LDPE and has a polypropylene (PP) screw cap.

  • …slip-on polyethylene cap. Volume 12 mL; mixing load approximately 5 mL. Accepts SPEX SamplePrep 3112, 3119, or 8006A methacrylate balls. Sold in units of 100. Polycarbonate Vial w/SlipOn Cap, 3/4 x 2 in.: 3/4 in. (19.1 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap.

  • Universal Fit Plug Caps

    Globe Scientific

    Universal plug stopper fits most 10mm, 12mm, 13mm & 16mm tubes. Produced from polyethylene (PE), the caps are available in 7 different colors.

  • Features large knurls for ergonomic handling Contains hydrophobic membrane for applications requiring gas exchange Sterilized by gamma radiationDoes not fit 490cm² roller bottles .

  • This replacement cap can be used on all High Yield Performance HYPER Flasks (Cat. No. 10020, 10024, 10030, 10034) 33mm threaded cap Solid cap is used in closed systems or applications where venting is not necessary Sterilized by gamma irradiation Disposable

  • Polyethylene Strip Caps

    Thermo Scientific Nunc

    …MicroWell® Plates Flexible Polyethylene provides a positive seal for each well Shallow depth of cap permits maximum utilization of well volume Each cap can be separated from strip for individual well usage and storage. Both sterile and non-sterile caps are available; sterile…

  • 16mm Plug Caps

    Globe Scientific

    Fits most 16mm tubes Polyethylene (PE) Assorted colors available

  • Starburst and conical design of the snap plug provides self centering needle penetration guidance as well as better resealability of plug after use. Plug is designed to easily push in and remove from the vial. Tight fit offers good sealability. The 15mm Snap Plug has a pre-scored starburst to…

  • 12mm Flanged Plug Caps

    Globe Scientific

    Fits most brands of 12mm tubes Polyethylene (PE) Available in sorted colors

  • Universal Snap Caps

    Globe Scientific

    Fits most 12mm, 13mm and 16mm plastic test tubes. Polyethylene Assorted colors available.

  • x65mm, 15-425 thread

  • Polyethylene Jerricans

    Thermo Scientific Nalgene

    …handle and pouring spouts are integrally molded onto stable, rectangular container Spout sealed by captive leakproof polypropylene screw cap, size 53B Molded graduations provide approximate volume indication in liters and gallons; recess in bottom serves as hand grip to assist tilting.…

  • 16mm Snap Caps

    Globe Scientific

    …They are precision molded from low-density polyethylene (LDPE) and maintain a tight seal during centrifugation, agitation and refrigeration procedures. They are available in bright attractive colors for sample identification purposes. The caps feature two thumb tabs for easy removal of the cap.

  • These disposable high density polyethylene sterile vent caps contain a 0.2µm pore hydrophobic PTFE membrane. They are designed to fit the Corning® 500mL, 1L and 3L Disposable Spinner Flasks (Cat. Nos. 3153, 3561and 3563) for culture applications requiring increased gas exchange. They also fit…

  • Polyethylene Jugs

    Thermo Scientific Nalgene

    Suitable for corrosive liquids Nalge 2220 series Low-density polyethylene jugs have polypropylene screw caps Neck is offset for easy and accurate pouring Large, molded handle accommodates gloved hand Leakproof Closure size for 1732M10 jug is 38-430 mm; dimensions are 11 3/4” high,…

  • Plug Caps

    Globe Scientific

    These polyethylene (PE) plug caps are designed in 11mm, 12mm, 16mm and 17mm sizes and are available in a selection of colors for sample identification.

  • Polyethylene Screw Cap Scintillation Vials

    DWK Life Sciences (Kimble)

    caps (9718K60) Similar to 9718K15, but cap has foamed polyethylene liner Caps are packaged separately in bags of 100. Vials with linerless polyethylene plug caps (9718K62) Polypropylene vials Size: 4 mL Bulk-packed Caps are packed separately in bags of 1,000. For replacement caps, see…

  • Low-Density Polyethylene Bottles

    Thermo Scientific Nalgene

    …and leakproof; ideal for trace metal analysis Polypropylene screw closures 8, 15, 30 and 60 mL bottles have a 20-415 cap size; 125 and 250 mL bottles have a 24-415 cap size; 500 mL bottles are available with 28-415 and 38-430 cap sizes; 1,000 mL bottles have a 38-430 cap size.

  • Polyethylene Screw Cap Scintillation Vials

    DWK Life Sciences (Wheaton)

    …9718J25 caps of polyethylene, size 22, without liner. “PET” Plastic Scintillation Vial (9718J50) Vials are polyethylene terephthate (PET); caps are polypropylene, size 22, with metal foil liners Capacity 20 mL Total height, with cap, 61 mm; o.d.: 27 mm Vials and caps are…

  • Low density polyethylene bottles with polyethylene dropper closure with captive cap. Supplied capped in shrink-wrapped packs of ten. Maximum temperature for low density polyethylene is 80°C.

  • High Grip Plug Caps

    Globe Scientific

    These polyethylene (PE) plug caps are designed in 11mm, 12mm, 16mm and 17mm sizes and are available in a selection of colors for sample identification.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.