Plug Seal Cap

…large volume centrifugation.  Support cushions (2602A46 for 250mL or 0330E07 for 500mL) must be used with this product unless the centrifuge rotor has appropriate V-bottom cushions Polyethylene plug seal caps Maximum RCF of 6,000xg Tubes are sterile and certified nonpyrogenic

Falcon® polystyrene Plug Seal screw caps for 50mL centrifuge tubes are sterile. The caps are sold 50 per pack and 1,000 per case.

…A wide range of optional caps are available for these bottles: Polypropylene colored caps in a choice of orange, green, purple, red, and light gray for ease of sorting and identification Vented membrane cap with 0.22µm PTFE hydrophobic membrane PBT caps with silicone septa for…

High vacuum stopcock that eliminates exposure to corrosive materials. Use to at least 13.6 Kg internal pressure. Variable openings from 0-3mm to 0-10mm. Ultimate vacuum of 10-7 can be realized with standard three seals. Smooth acting valve permits fine

Made of polyethylene These caps have two flexible flanges to ensure a leakproof seal. They will fit into test tubes and also in round cuvettes and centrifuge tubes.

Process tubes at their highest rated speed level (10,000 x g or greater) without leakage, even when full. Thermo Scientific™ Nalgene™ Sealing Cap Assemblies include a Viton™ fluoroelastomer o-ring. Also recommended when spinning hazardous materials compatible with centrifuge tube…

…when connected to reduce tube kinks. MPC Connectors are reusable, and economical enough for single use while meeting all biocompatibility requirements. Choose from a full line of connectors and configurations, including pressure sealing caps and plugs, available in sizes 1/8", 1/4", and 3/8".

…when connected to reduce tube kinks. MPC Connectors are reusable, and economical enough for single use while meeting all biocompatibility requirements. Choose from a full line of connectors and configurations, including pressure sealing caps and plugs, available in sizes 1/8", 1/4", and 3/8".

…valve seat and a precision tooled external thread. The design of cap (made of Delrin®) and valve stem provides a non-rotating primary seal. Interchangeable between valves of the same bore size, valve plugs have two PTFE seal rings that enclose Viton® O-rings. This prevents exposure of the…

…This leakproof design comes with a revolutionary plug feature that prevents seepage when used under recommended conditions. The plug seal cap is an original Corning design featuring a contoured plug for a tight, secure seal. This Corning plug seal product design has successfully passed the 95 kPa…

The Corning® orange polypropylene caps are autoclavable at 121°C, have a GLS80 thread and use a linerless plug seal design for efficient sealing. Cap Style: Plug Seal Cap Material: Polypropylene Cap Color: Orange Thread Finish: 80 GL Feature: Reusable Sterile: No

…caps (9718K60) Similar to 9718K15, but cap has foamed polyethylene liner Caps are packaged separately in bags of 100. Vials with linerless polyethylene plug caps (9718K62) Polypropylene vials Size: 4 mL Bulk-packed Caps are packed separately in bags of 1,000. For replacement caps, see…

… Plugs sold in sets of two. Positioning Rod and Collar also a set and ordered separately. The upper face of both plugs has a thread to firmly attach a positioning rod which holds the upper plug in place. In turn, the rod is held by a collar that rests on the top of the tube. A special sealing collar…

… Plugs sold in sets of two. Positioning Rod and Collar also a set and ordered separately. The upper face of both plugs has a thread to firmly attach a positioning rod which holds the upper plug in place. In turn, the rod is held by a collar that rests on the top of the tube. A special sealing collar…

…when connected to reduce tube kinks. MPC Connectors are reusable, and economical enough for single use while meeting all biocompatibility requirements. Choose from a full line of connectors and configurations, including pressure sealing caps and plugs, available in sizes 1/8", 1/4", and 3/8".

…when connected to reduce tube kinks. MPC Connectors are reusable, and economical enough for single use while meeting all biocompatibility requirements. Choose from a full line of connectors and configurations, including pressure sealing caps and plugs, available in sizes 1/8", 1/4", and 3/8".

…Designed for maximum growth of anchorage dependent cells. Canted neck for easy access to growth surface. A choice of phenolic style caps, plug seal caps and vented caps for sterile gas exchange. The 75 cm 2 canted neck tissue culture flask has a wide mouth for easy pipet access. All flasks are…