Plug Caps

Compare Tool

Select up to 3 products

Plug Caps
1 - 32 of 193
Sort
View
Show
  • Snap Plugs For Shell Vials

    J.G. Finneran

    Starburst and conical design of the snap plug provides self centering needle penetration guidance as well as better resealability of plug after use. Plug is designed to easily push in and remove from the vial while still providing a tight fit for good sealability.

  • 16mm Flanged Plug Cap

    Globe Scientific

    Fits most 16mm tubes Polyethylene (PE) Assorted colors available

  • Plug Caps

    Globe Scientific

    These polyethylene (PE) plug caps are designed in 11mm, 12mm, 16mm and 17mm sizes and are available in a selection of colors for sample identification.

  • Plug-Type Caps for 13x100mm and 12x75mm Tubes

    Labcon

    Tube caps are made of low density polyethylene for a secure seal and are available in a fluted plug style that permits sample aspiration. Polyethylene caps are not autoclavable, but are available pre-sterilized with many of the tube packages.

  • 12 mm Plug Caps

    Globe Scientific

    Polyethylene (PE) Fits Globe 12x75mm PS and PP tubes Available in assorted colors

  • Diamond Culture Tube Caps

    Globe Scientific

    …is indicated on each cap. Polypropylene (PP) Autoclavable Ridges inside cap provide secure grip and gas exchange Available in five sizes and five colors Maintain sterility without cotton plugging Reduce sample evaporation compared to cotton plugging Provide same evaporation…

  • Universal Fit Plug Caps

    Globe Scientific

    Universal plug stopper fits most 10mm, 12mm, 13mm & 16mm tubes. Produced from polyethylene (PE), the caps are available in 7 different colors.

  • SuperClear™ 12x75mm Round Bottom Tubes, 5mL Capacity with Plug-Type Caps

    Labcon

    …crafted of extra clear virgin polypropylene in natural and colors or clear virgin polystyrene. Tube caps are made of low density polyethylene for a secure seal and are available in a fluted plug style that permits sample aspiration. Polypropylene tubes are autoclavable to 122°C and…

  • Polyethylene Snap Plugs with Starburst

    J.G. Finneran

    …and conical design of the snap plug provides self centering needle penetration guidance as well as better resealability of plug after use. Plug is designed to easily push in and remove from the vial. Tight fit offers good sealability. The 15mm Snap Plug has a pre-scored starburst to offer…

  • Flange Plug Caps

    Simport

    Made of polyethylene These caps have two flexible flanges to ensure a leakproof seal. They will fit into test tubes and also in round cuvettes and centrifuge tubes.

  • 12/13mm Santoprene Plug Caps

    Globe Scientific

    These pierceable caps are great for recapping vacuum blood tubes and test tubes. They are produced from santoprene (a rubberized material) and can easily be pierced with a syringe.

  • 13mm Flanged Plug Cap

    Globe Scientific

    Plug cap, flanged. Fits most 13mm tubes Polyethylene (PE) Assorted colors available

  • 16mm Plug Caps

    Globe Scientific

    Fits most 16mm tubes Polyethylene (PE) Assorted colors available

  • 12mm Flanged Plug Caps

    Globe Scientific

    Fits most brands of 12mm tubes Polyethylene (PE) Available in sorted colors

  • High Grip Plug Caps

    Globe Scientific

    These polyethylene (PE) plug caps are designed in 11mm, 12mm, 16mm and 17mm sizes and are available in a selection of colors for sample identification.

  • 16mm Santoprene Plug Caps

    Globe Scientific

    These pierceable caps are great for recapping vacuum blood tubes and test tubes. They are produced from santoprene (a rubberized material) and can easily be pierced with a syringe.

  • Identi-Plugs®

    Jaece

    Foam plugs for all size test tubes and laboratory flasks Identi-Plugs® are for use with test tubes and flasks. They are reusable and leave no clinging fibers like cotton plugs. They provide a snug fit, yet permit free air flow. Plugs are ideal for use with Drosophila vials. They spring…

  • Polyethylene Caps and Stoppers for Conical Centrifuge Tubes

    Simport

    17 mm outside diameter Plug type push-in caps are made of polyethylene for test tubes with outside diameters of 17 mm. Dual position caps can be closed but not sealed so that samples are maintained aerobic for microbiological procedures, or caps can be pushed tight and fully sealed for…

  • Opti-Cap GL-45 Bottle Tops

    Restek

    The most economical way to helium-sparge and deliver LC mobile phases. Opti-Cap tops fit all standard GL-45 bottles and have two 1/8" holes and one 1/16" hole for tubing. All three openings are designed for threaded PEEK plugs.

  • Hybridization Oven/Incubator Accessories

    Techne (Bibby Scientific US)

    Hybridization Tubes with Sealing End Caps (7187D22 and D23) Of borosilicate glass, eliminating the need for a silanizing agent 7187D22 usable length 195 mm x 80 mm external diameter (73 mm internal diameter); 7187D23 usable length 195 mm x 44 mm external diameter (37 mm internal…

  • E-Cube Culture System

    Corning

    …luer fittings; 2 male luer plugs; 2 interlink injection sites; 1 sleeve of blunt plastic cannulas and 3 1.0” ID x 1.25” OD, 1/8” thickness O-rings. 45 mm Polypropylene cap is autoclavable and comes with two 15.24 cm stainless steel tubes. Cap fits Corning glass and plastic…

  • Mini Tube Strip Caps

    Axygen®

    …to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Available in 0.65mL single MiniTube or 1.1mL single MiniTube and 8-tube or 12-tube strip formats 96 well rack footprint compatible…

  • Caps for 17x100mm Tubes

    Labcon

    Tube caps are made of low density polyethylene for a secure seal and are available in a fluted plug style or dual position design that permits sample aspiration. Polyethylene caps are not autoclavable, but are available pre-sterilized with many of the tube packages.

  • Tube Fittings, Caps and Plugs

    Swagelok

    Caps close end of fractional tubing Plugs close unused port of fractional tubing Available in brass or stainless steel

  • Gel Casters–Small Format Vertical Electrophoresis

    GE Healthcare

    …weeks Includes: Caster Body with Gasket Face Plate with Inlet Port Rectangular Glass Plates Notched Alumina Plates Spring Clamps Wax Paper (100 sheets) Space-Saver Plate Polycarbonate Filler Sheets (5 pcs) Black Vinyl Cap Filler Plug Set

  • Plug Cap Centrifuge Tubes

    Stockwell Scientific

  • Hollow Top Plug Caps (LDPE)

    Stockwell Scientific

  • Sterile Polypropylene Centrifuge Tubes with Plug Seal Cap

    Corning

    …large volume centrifugation.  Support cushions (2602A46 for 250mL or 0330E07 for 500mL) must be used with this product unless the centrifuge rotor has appropriate V-bottom cushions Polyethylene plug seal caps Maximum RCF of 6,000xg Tubes are sterile and certified nonpyrogenic

  • Tricorn Columns

    GE Healthcare

    …designed for high-performance media such as Sepharose, Superdex, and SOURCE. Tricorn columns include a glass tube, adapter unit, end cap, filter kit, two stop plugs, two fingertight connectors, two M6 connectors, adapter lock, and filter holder. Packing Tricorn columns is simplified using Tricorn…

  • Strips of 8 plug caps, sterile, bulk

    Simport

    …polypropylene and are available either individually or in strips of 8 or 12 detachable tubes. Tubes have a gross volume of 1.2 ml but with a cap in place, they will hold 1.1 ml. Caps are made of polyethylene and are not autoclavable. They are available individually and also in strips of 8 or 12.

  • Caps and Plugs

    Agilent Technologies

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.