Plastic Vacuum Flask

Compare Tool

Select up to 3 products

Plastic Vacuum Flask
1 - 25 of 25
Sort
View
Show

Across

  • P-Vac Portable Vacuum System

    Argos Technologies

    …bottle top aspirating filter units, plastic vacuum bottles, glass Erlenmeyer flasks, or any device that accepts vacuum. The rechargeable lithium ion battery allows for use where an inline vacuum source is not available, outside of the laboratory setting where a vacuum is required, or when the sample…

  • Plastic Pasteur Pipettes

    Argos Technologies

    …glass, and the safety and benefits of plastic. Plastic construction allows the long flexible stem to be bent to draw liquid from narrow or small volume tubes. These pipets can be used with aspirating bulbs or vacuum applications to remove liquid waste from flasks, dishes, plates & tubes. …

  • Scienceware® Vacuum Aspirator Bottle

    Bel-Art - SP Scienceware

    …while the attached trap protects the vacuum source from accidental fluid backflow. A flexible collection tube reaches from the bottle and accepts disposable 1 mL pipet tips, glass Pasteur or 2 mL pipets for work with Petri dishes, microtiter plates, flasks and centrifugal tubes. The small footprint…

  • Polysulfone Vacuum Filter Holders

    Advantec MFS

    …500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed polypropylene filter support provides…

  • Sublimation Apparatus, Vacuum

    Ace Glass

    …constructed of heavy wall glass. Will sublime 100gms of solid sample. Cold finger tube positions in center neck and is held by a plastic bushing to a threaded condenser flask. All joints are PTFE-Clad to eliminate the use of grease and still avoid freezing. Kettle flange has a groove for a CAPFE…

  • Condensers, 'C' Assembly, Constant Feed, for Rotary Evaporators, Plastic Coated

    Chemglass

    …solvents. Condenser is supplied complete with all fittings necessary to connect the continuous feed feature, along with our new style PTFE centering ring which makes a vacuum tight seal between the inner cold finger and the plastic coated outer sleeve. Also supplied with a UHMW lid with knob.

  • Polypropylene Filtering Flasks

    Thermo Scientific Nalgene

    Polypropylene flasks are molded in one piece to withstand full vacuum to 30" Hg Oval marking area Autoclavable Tubulation at 45° angle prevents tipping. Barbed adapter accepts 1/4" to 3/8" I. D. tubing

  • Rotavapor® R-100 Rotary Evaporator

    Buchi

    …+10°C, 400 W Vacuum Controller: I-100, with Woulff bottle Vacuum Pump: V-100, 1.5 m3/h, 10 mbar 1190U79 Glass Assembly: V (vertical) Protective Coating: Without Recirculating Chiller: Without Vacuum Controller: I-100, with Woulff bottle Vacuum Pump: V-100, 1.5…

  • Borosil® BOD Bottles with Glass Pennyhead Stoppers and Plastic Security Caps

    Borosil

    In collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North…

  • KimCote® Filtering Flasks

    DWK Life Sciences (Kimble)

    …needed for vacuum filtration Autoclavable KimCote® safety coating reduces the hazards of shattered glass and leakage of toxic or corrosive chemicals The plastic safety coating is steam-autoclavable The 125mL flask has a No. 5 stopper joint The 1, 2 and 4 liter flasks have a No. 8…

  • Support Assemblies, 47mm, Fritted

    Chemglass

    Glassware system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and…

  • Evaporating Flasks, Large Scale

    Chemglass

    Flasks are compatible with Buchi large scale rotary evaporators. Flasks to fit large scale rotary evaporators. Flasks have a HEAVY WALL for vacuum applications and are balanced to prevent run-out during rotation. Available plain or plastic coated to prevent injury from broken glass while preventing…

  • Flasks, Evaporating, Heavy Wall, Single Neck, Recovery

    Chemglass

    Evaporating flask for use with rotary evaporators. Flasks have a HEAVY WALL for vacuum applications and are balanced to prevent run-out during rotation. For Plastic Coated flasks, see CG-1512-P.

  • Rotary Evaporators, Diagonal Condensers

    Techne (Cole-Parmer)

    …is plastic coated version and consists of: Diagonal coil condenser plastic coated, vapour tube for diagonal condenser, receiving flask 1000ml plastic coated, Florentine flask 1000ml plastic coated, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip. (Please note plastic

  • Rotary Evaporators, Vertical Condensors

    Techne (Cole-Parmer)

    flask 1000ml, Florentine flask 1000ml, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip. RE301P Glass set consists of: Vertical coil condenser plastic coated, vapour tube for vertical condenser, receiving flask 1000ml plastic coated, Florentine flask 1000ml plastic

  • Polypropylene Check Valves

    Bel-Art - SP Scienceware

    Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted. Useful when connecting a vacuum line to a filter flask Recommended maximum pressure 20psi (1034 Torr) Autoclavable

  • Support Assemblies, 47mm, Fritted, 40/35

    Chemglass

    …extraction disks. Support base has a sealed-in coarse porosity fritted disc and a vacuum connection located above the drip tip to prevent filtrate from entering the vacuum line. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and plastic coated filtering flask.

  • MiniVac Waste Collection System

    Argos Technologies

    …cap with barbed fittings and tubing. Clear PETG plastic safety reservoir collects liquid in case flask cracks or leaks Use as stand-alone waste collection system or overflow vessel Polypropylene barbed cap fittings eliminate risk of broken glass rod fittings Use with in-house vacuum

  • Aspirating Pipettes

    Argos Technologies

    Aspirating pipettes are sterile, individually wrapped plastic serological pipettes that are supplied without filter plugs and graduations for vacuum aspirating applications. They are very useful in tissue culture applications when aspirating larger volumes from dishes, flasks, or roller bottles.

  • 47mm Magnetic Filter Funnels

    Pall Life Sciences

    For vacuum filtration of liquids, especially for the analysis of aqueous samples for microbiological and particulate contamination using the Membrane Filter (MF) Technique. The Magnetic Filter Funnel is ideal for use with a filter funnel manifold or side-arm vacuum flask using a rubber stopper…

  • FreeZone® Freeze Dryers Accessories -- Chambers, Manifolds & Shelves

    Labconco

    …8L, 6L, 12L or 18L FreeZone Freeze Dryer. Type 304 Stainless Steel complete with 4 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flask. 8-Port Manifold for FreeZone Freeze Dryers (1177K18): 8-Port Manifold for use with 1L, 2.5L,…

  • FreeZone® Freeze Dryers Miscellaenous Accessories

    Labconco

    …1/2" or 3/4" flask adapters. For field installation. Isolation valve isolates Tray Dryer from Freeze Dryer. Includes couplings, clamps and instruction sheet. To be used with FreeZone 6L, 12L or 18L Console and Stoppering Tray Dryer or Bulk Tray Dryer. 1 EA. Vacuum Hose For Use With…

  • VitroKit

    DWK Life Sciences (Wheaton)

    …thermometer adapter with Neoprene bushing; vacuum distilling adapter; 200 mm West condenser; 200 mm distilling column; 125 mL separatory funnel with Teflon ® stopcock plug; Teflon ® stopper; gas inlet tube; and five round bottom flasks, one each of sizes 25, 50, 100, 250 and 500 mL.…

  • Scienceware® Vakuwash® Cuvette Washer

    Bel-Art - SP Scienceware

    …that are often more fragile than the cuvettes they wash. Comes complete with a 500 cc polypropylene vacuum flask, Vikem(R) vinly stopper, and 3' of PVC tubing ready for connection to a vacuum line. The mouth of an inverted cuvette is pressed against the rubber cushion to induce suction. Water…

  • Extraction System

    Avantor - J.T.Baker®

    …seals against foamed plastic gasket. Requires suitable external vacuum source such as water aspirator or vacuum pump. Accessory racks can be substituted for automatic samplers. Without vacuum source, vacuum tubing or vacuum trap. Normally, a 500 mL or larger vacuum filter flask is used as trap.…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.