Plastic Test Tubes

Compare Tool

Select up to 3 products

Plastic Test Tubes
1 - 32 of 213
Sort
View
Show
  • 30mm, 24-Place Plastic Test Tube Racks

    Globe Scientific

    Perfect for 50mL Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float …

  • Plastic Test Tube

    LaMotte

  • 12 x 75mm Plastic Culture/Test Tubes

    Globe Scientific

    Globe Scientific's plastic culture tubes are produced in polystyrene (PS) or polypropylene (PP). The polystyrene tubes can withstand 1500 RPM during centrifugation. polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Tubes with dual position snap caps (LDPE)…

  • Test Tube Plastic Filtrate

    LaMotte

  • Test Tube Plastic 60-400ppm w / Cap

    LaMotte

  • Test Tube Plastic 1-8ml w / Cap

    LaMotte

  • 16 x 100mm Test Tubes

    Globe Scientific

    …extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM…

  • 15 mL Centrifuge Test Tubes

    Globe Scientific

    …solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Globe's broad range of sizes are sure to fit most laboratory applications. 17 x 120mm (15mL capacity) test tube with conical bottom, graduated.…

  • 15 & 50mL Disposable Plastic Centrifuge Tubes

    Corning

    tubes provide excellent chemical resistance and mechanical strength. They are strong, moderately rigid, and well-suited for most disposable centrifuge applications. PET tubes offer excellent optical clarity for ease of measurement, observation, and test recording. Caps: These tubes are…

  • Disposable Borosilicate Glass Culture Tubes

    DWK Life Sciences (Kimble)

    …a factor common in soda lime glass products Tubes are packed in convenient trays for ease of use on bench tops and in drawers The 6x50mm size is often referred to as a "Durham tube" Trays are shrink-wrapped in plastic film, with tubes remaining in constant alignment for protection…

  • Falcon® Round Bottom Test Tubes

    Corning

    …and capacity is 14 mL 9219F28 tubes are wrapped individually; case contains 500. 9219F30 tubes are packed in bags of 25; case contains 20 bags. 9219F32 tubes are packed in bags of 125; case contains 8 bags. 9219F40 tubes are similar to 9219F32 tubes but without caps. Polypropylene,…

  • Falcon® Conical Centrifuge Tubes

    Corning

    …To meet this intense challenge, Falcon tubes are designed for: High strength: State-of-the-art mold design, coupled with advanced resin selection, create tube walls that are engineered to perform under high-stress situations. Nonpyrogenicity: Tested to less than 0.1 EU/mL. Nontoxicity:…

  • Polypropylene General Purpose Test Tubes

    Evergreen Scientific

    Non-sterile, precision molded, round bottom test tubes for general purpose laboratory work Polypropylene tubes are more chemically resistant than polystyrene and are appropriate for use with organic solvents and stronger acids (except oxidizing acids), alkalis, alcohols, chlorinated &…

  • Plastic Viewing Tubes with Caps

    Hach

    Plastic color viewing tubes for use in a variety of Hach test kits.

  • Multi-Purpose Test Tubes

    Stockwell Scientific

    Precision-molded from premium-grade plastics and ideal for routine laboratory analysis and procedures. We have applied the lessons learned from over 27 years of manufacturing experience to produce tubes that perform at their highest level. Our tubes are rigorously inspected by our Quality Assurance…

  • Thomas Culture Tubes

    Thomas®

    Tubes can be used for almost any laboratory procedure. They are chemically free and biologically inert. These tubes are precision molded from premium grade materials and checked under strict quality guidelines, which provide continued lot-to-lot uniformity and reliable performance. All sterile tubes

  • 12/13mm Snap Cap for Tubes

    Globe Scientific

    tubes Fits most 12mm plastic culture tubes Thumb tab for easy removal Polyethylene (LDPE) 1000 caps per sealed bag Assorted colors available These colorful snap on closures are an effective way to recap 13mm blood drawing tubes, glass test tubes and most 12mm plastic culture tubes.

  • KIMAX Test Tubes With Marking Spot

    DWK Life Sciences (Kimble)

    With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

  • Protein LoBind Tubes

    Eppendorf

    …binding to the plastic surface. Eppendorf LoBind Tubes maximize sample recovery by significantly reducing sample binding to the surface. A special, two-component polymer mix creates a hydrophilic surface that guarantees optimal recovery rates of valuable samples. Protein LoBind Tubes have been…

  • Microtiter Tubes

    MBP

    Microtiter tube systems are available pre-racked in an 8 x 12 format and can be autoclaved, sealed and frozen for storage. Tubes offer additional volume capacity for sample dilution and/or mixing prior to a range of procedures including HTLV-III testing, RIA, EIA, PCR, pharmaceutical quality…

  • Switch-Grid™ Test Tube Racks

    Bel-Art - SP Scienceware

    … 10mm to 30mm diameter test tubes fit in 5 colored coded grid inserts Three tier rack holds tubes securely in place Rubber feet keep racks from sliding on benchtop, provide secure stacking while in storage Chemical resistant polyoxymethylene plastic rack frame and grids can be cleaned…

  • Foam Test Tube Racks

    Jaece

    Foam racks for test tube storage and protection during shipping These economical, charcoal gray, open-cell foam racks have a capacity for 50 tubes in a wide range of sizes. Ideal for storage on benchtops, in incubators and refigerators/freezers. Racks will float for use in waterbaths. Can be…

  • Universal Snap Caps

    Globe Scientific

    Fits most 12mm, 13mm and 16mm plastic test tubes. Polyethylene Assorted colors available.

  • 13mm Snap Caps with 2 Thumb Tabs

    Globe Scientific

    Fits 13mm glass evacuated blood drawing tubes Fits most 12mm plastic test tubes Dual tabs for easy removal Polyethylene (PE)

  • Econo Test Tube Racks

    Maryland Plastics

  • Floating Test Tube Racks

    Jaece

    Polyfoam racks for PCR, microtubes and centrifuge tubes Eliminate expensive plastic floating racks with economical polyfoam floating racks. Easy to use in waterbaths or beakers. Inscriptions with  Identi-Marker  pens may be made for quick identification. Unique Features …

  • Disposable, Polystyrene Culture Tubes

    Thermo Scientific Nunc

    Size 100 x 15 mm Of clear polystyrene Total volume 12 mL Working volume 10 mL Tube is radiation sterilized and includes plug-seal, polyethylene stopper; packaged in sleeves of 100, five sleeves to a case.

  • Borosilicate N-51a Glass Tissue Culture Tubes

    DWK Life Sciences (Kimble)

    …packages of 500 tubes. 9215D54 and D76 tubes take size 15-415 cap and are sold in cases containing 4 shelf packages of 250 tubes. 9215D65 Tube takes size 18-415 cap and is sold in cases containing 2 shelf packages of 250 tubes. 9215E18, E26 and E34 caps are of black phenolic plastic with cemented…

  • 12/13mm Snap Caps

    Globe Scientific

    These colorful snap-on closures are an effective way to recap blood drawing tubes, glass test tubes and plastic culture tubes. They are precision molded from low-density polyethylene (LDPE) and maintain a tight seal during centrifugation, agitation and refrigeration procedures. They are available in…

  • 16mm Snap Caps

    Globe Scientific

    These colorful snap-on closures are an effective way to recap blood drawing tubes, glass test tubes and plastic culture tubes. They are precision molded from low-density polyethylene (LDPE) and maintain a tight seal during centrifugation, agitation and refrigeration procedures. They are available in…

  • Liquid Phase Immunoassay Tubes

    Thermo Scientific Nunc

    MiniSorp surface Molded from special polyethylene formulation For liquid phase immunoasssays, including RIA, for storing of reagents, or collecting chromatographic fractions Mini-Sorp™ is a polyethylene-based material that provides a low-binding surface.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.