Plastic Test Tubes

Compare Tool

Select up to 3 products

Plastic Test Tubes
1 - 32 of 256
  • Abdos Plastic Test Tube

    Foxx Life Sciences

    …used to test antigens (for sample, hormone levels in the blood) without the need to use a bioassay. Polystyrene (PS) tubes are transparent and can withstand 1400 RCF during centrifugation, and are suitable for mild bases, weak acids but not organic solvents. Abdos Plastic Test Tube Cap (13MM).…

  • Perfect for 50mL Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float …


    United Scientific Supplies

    This polyethylene rack will hold six test tubes, and has six drying pins. Sides are fully open for clear viewing. Rack has two 30mm and four 20mm holes, and is pre-assembled.


    United Scientific Supplies

    Good quality round test tube rack will hold 24 tubes up to 20mm in diameter. Solid high-impact plastic construction. Rack is 145mm in diameter and 70mm high, and features a perforated bottom. Shipped preassembled.

  • Globe Scientific's plastic culture tubes are produced in polystyrene (PS) or polypropylene (PP). The polystyrene tubes can withstand 1500 RPM during centrifugation. polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Tubes with dual position snap caps (LDPE)…


    United Scientific Supplies

    This circular 12 place Polypropylene test tube stand has four 25mm diameter holes and eight 19mm diameter holes. The base has matching wells and 16 drying pins surrounded by a trough to catch drippings. Pre-assembled.

  • 15 mL Centrifuge Test Tubes

    Globe Scientific

    …solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Globe's broad range of sizes are sure to fit most laboratory applications. 17 x 120mm (15mL capacity) test tube with conical bottom, graduated.…


    United Scientific Supplies

    This set contains twelve 15ml screw top graduated plastic tubes and a brightly colored two tiered test tube stand.

  • tubes provide excellent chemical resistance and mechanical strength. They are strong, moderately rigid, and well-suited for most disposable centrifuge applications. PET tubes offer excellent optical clarity for ease of measurement, observation, and test recording. Caps: These tubes are…

  • Disposable Borosilicate Glass Culture Tubes

    DWK Life Sciences (Kimble)

    …a factor common in soda lime glass products Tubes are packed in convenient trays for ease of use on bench tops and in drawers The 6x50mm size is often referred to as a "Durham tube" Trays are shrink-wrapped in plastic film, with tubes remaining in constant alignment for protection…

  • Polypropylene Test Tubes

    Evergreen Scientific

    Non-sterile, precision molded, round bottom test tubes for general purpose laboratory work Polypropylene tubes are more chemically resistant than polystyrene and are appropriate for use with organic solvents and stronger acids (except oxidizing acids), alkalis, alcohols, chlorinated &…

  • Plastic color viewing tubes for use in a variety of Hach test kits.

  • 12/13mm Snap Cap for Tubes

    Globe Scientific

    tubes Fits most 12mm plastic culture tubes Thumb tab for easy removal Polyethylene (LDPE) 1000 caps per sealed bag Assorted colors available These colorful snap on closures are an effective way to recap 13mm blood drawing tubes, glass test tubes and most 12mm plastic culture tubes.

  • Tubes can be used for almost any laboratory procedure. They are chemically free and biologically inert. These tubes are precision molded from premium grade materials and checked under strict quality guidelines, which provide continued lot-to-lot uniformity and reliable performance. All sterile tubes

  • KIMAX Test Tubes With Marking Spot

    DWK Life Sciences (Kimble)

    With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

  • …binding to the plastic surface. Eppendorf LoBind Tubes maximize sample recovery by significantly reducing sample binding to the surface. A special, two-component polymer mix creates a hydrophilic surface that guarantees optimal recovery rates of valuable samples. Protein LoBind Tubes have been…

  • Microtiter tube systems are available pre-racked in an 8 x 12 format and can be autoclaved, sealed and frozen for storage. Tubes offer additional volume capacity for sample dilution and/or mixing prior to a range of procedures including HTLV-III testing, RIA, EIA, PCR, pharmaceutical quality…

  • … 10mm to 30mm diameter test tubes fit in 5 colored coded grid inserts Three tier rack holds tubes securely in place Rubber feet keep racks from sliding on benchtop, provide secure stacking while in storage Chemical resistant polyoxymethylene plastic rack frame and grids can be cleaned…

  • Fits 13mm glass evacuated blood drawing tubes Fits most 12mm plastic test tubes Dual tabs for easy removal Polyethylene (PE)

  • Foam racks for test tube storage and protection during shipping These economical, charcoal gray, open-cell foam racks have a capacity for 50 tubes in a wide range of sizes. Ideal for storage on benchtops, in incubators and refigerators/freezers. Racks will float for use in waterbaths. Can be…

  • Universal Snap Caps

    Globe Scientific

    Fits most 12mm, 13mm and 16mm plastic test tubes. Polyethylene Assorted colors available.

  • Econo Test Tube Racks

    Maryland Plastics

  • Polyfoam racks for PCR, microtubes and centrifuge tubes Eliminate expensive plastic floating racks with economical polyfoam floating racks. Easy to use in waterbaths or beakers. Inscriptions with  Identi-Marker  pens may be made for quick identification. Unique Features …


    United Scientific Supplies

    …Polypropylene construction provides good chemical and thermal resistance. Autoclavable. Racks feature a 3/4" x 2-3/4" labeling area on two sides. Open design allows easy viewing of contents from all sides.Available in sizes that hold 13mm or 16mm tubes. Both racks feature a 6 x 6 array of holes.

  • Disposable, Polystyrene Culture Tubes

    Thermo Scientific Nunc

    Size 100 x 15 mm Of clear polystyrene Total volume 12 mL Working volume 10 mL Tube is radiation sterilized and includes plug-seal, polyethylene stopper; packaged in sleeves of 100, five sleeves to a case.

  • Tubes are wrapped in multiple layers of clear Mylar plastic to help avoid accidental breakage. The Mylar wrap helps to contain the sample if the tube fractures, inside or outside the centrifuge. Chance of contamination due to glass fragments or aerosols is greatly reduced. Red tip tubes contain…

  • 12/13mm Snap Caps

    Globe Scientific

    These colorful snap-on closures are an effective way to recap blood drawing tubes, glass test tubes and plastic culture tubes. They are precision molded from low-density polyethylene (LDPE) and maintain a tight seal during centrifugation, agitation and refrigeration procedures. They are available in…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.