Plastic Filter Flask

Polypropylene flasks are molded in one piece to withstand full vacuum to 30" Hg Oval marking area Autoclavable Tubulation at 45° angle prevents tipping. Barbed adapter accepts 1/4" to 3/8" I. D. tubing

Detachable autoclavable plastic sidearm designed to accept 5/16" ID flexible tubing (US Patent 3,268,300) Sidearm has two ears to provide a finger grip for easy insertion into a neoprene grommet by turning the plastic piece Opening in the sidearm is larger at the flask end to hold a…

Duran® heavy wall filtering flask has a unique removable PPN hose connection. Hose connection is secured to the flask via a silicone rubber seal. Bottle shape filter flask, PLASTIC COATED, with removable PPN hose connection. For replacement PPN hose connection sets see CG-1563.

Angled handle fits easily into flask or bottle necks and bends to allow fitting of brush to container shape. Brushes are mounted on a flexible plastic handle, designed for cleaning Erlenmeyer, Filtering, Kjeldahl, Nephelo, Pear-Shaped, Round Bottom, Flat Bottom, Reaction, and Volumetric flasks.

Angled handle fits easily into flask or bottle necks and bends to allow brush to fit container shape. Brushes are mounted on a flexible plastic handle designed for cleaning Erlenmeyer, Filtering, Kjeldahl, Nephelo, Pear-shaped, Round-bottom, Flat-bottom, Reaction, and Volumetric Flasks.

…bagged and fit the 2L Corning® Polycarbonate Erlenmeyer flasks. These aseptic transfer caps can also be used on Corning 850 and 1700cm 2 plastic disposable roller bottles. Venting port ends in a 50mm diameter vent filter with a 0.2µm pore PVDF membrane and a barbed fitting …

…walls Graduated Replaceable tube These PYREX heavy wall flasks have a seated bent, removable plastic tubulation in a grommet. Should the flask be upset, the grommet acts as a shock absorber. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords…

…shattered glass and leakage of toxic or corrosive chemicals The plastic safety coating is steam-autoclavable The 125mL flask has a No. 5 stopper joint The 1, 2 and 4 liter flasks have a No. 8 stopper joint All flasks have a side arm for connection to 3/8” (6 mm) ID flexible tubing…

Glass components manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Flasks have a #2 hose connection for 1/4 (6mm) I.D. tubing Plastic coated for safety Not Graduated No. 8 Stopper opening

47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…

PC bottle or PEFG bottle Sterilized by E-Beam Nonpyrogenic Individually wrapped in a plastic bag. Both vent caps and plug seal caps are available. Vent caps with 0.22um hydrophobic filters for gas exchange without contamination.

PC bottle or PEFG bottle Sterilized by E-Beam Nonpyrogenic Individually wrapped in a plastic bag. Both vent caps and plug seal caps are available. Vent caps with 0.22um hydrophobic filters for gas exchange without contamination.

…an airflow rate of 4.5 (LPM/3.7cm2/13.5psi), the gas exchange properties of the filtered flasks are comparable to that of the standard cap flasks. Synonyms: T150 flask; cell culture flask; tissue culture flask Legal Information: TPP is a registered trademark of TPP Techno Plastic Products AG

…an airflow rate of 4.5 (LPM/3.7cm2/13.5psi), the gas exchange properties of the filtered flasks are comparable to that of the standard cap flasks. Synonyms: T75 flask; cell culture flask; tissue culture flask Legal Information: TPP is a registered trademark of TPP Techno Plastic Products AG

…an airflow rate of 4.5 (LPM/3.7cm2/13.5psi), the gas exchange properties of the filtered flasks are comparable to that of the standard cap flasks. Synonyms: T150 flask; cell culture flask; tissue culture flask Legal Information: TPP is a registered trademark of TPP Techno Plastic Products AG

…an airflow rate of 4.5 (LPM/3.7cm2/13.5psi), the gas exchange properties of the filtered flasks are comparable to that of the standard cap flasks. Synonyms: T25 flask; cell culture flask; tissue culture flask Legal Information: TPP is a registered trademark of TPP Techno Plastic Products AG

These PYREX® heavy wall flasks have seated a bent, removable plastic tubulation in a grommet. Should the flask be upset, the grommet acts as a shock absorber. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers.…

…flasks provided by screw-cap side arms, attached at offset angle to allow insertion of pipet or probe without striking impeller shaft. Side arms are 9 mm i.d. and are suitable for decanting, filtered vent, inoculation, installation of sensing probe, etc. and are closed with Teflon-lined, plastic…

…of the flask. The venting port ends in a 50mm diameter vent filter with a 0.2 µm pore PVDF membrane and a barbed fitting. The liquid transfer port uses a 1/4" ID (3/8" OD) chemically resistant, heat sealable flexible tubing on the external side of the cap ending in a male plastic…

Glassware system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and…

…extraction disks. Support base has a sealed-in coarse porosity fritted disc and a vacuum connection located above the drip tip to prevent filtrate from entering the vacuum line. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and plastic coated filtering flask.

Heavy wall, bottle shaped, filtering flask with removable polypropylene hose connection. Offered plain or plastic coated. Order 6989-40 for replacement hose connection assembly consisting of PBT hose connection, EPDM o-ring, VMQ silicone seal, PP screw

…their performance. A unique, gravity-sealing design prevents filter bypass or sample leakage when using depth filters. Graduations up to 350 mL in 50 mL intervals. The No. 8 stopper mounts in a standard 1 liter filtering flask or in multi-position manifolds. The polysulfone unit has a dustcover,…

…or laminar hood. It has been designed to accommodate a variety of collection vessels including bottle top aspirating filter units, plastic vacuum bottles, glass Erlenmeyer flasks, or any device that accepts vacuum. The rechargeable lithium ion battery allows for use where an inline vacuum source is…

Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted. Useful when connecting a vacuum line to a filter flask Recommended maximum pressure 20psi (1034 Torr) Autoclavable

Aspirating pipettes are sterile, individually wrapped plastic serological pipettes that are supplied without filter plugs and graduations for vacuum aspirating applications. They are very useful in tissue culture applications when aspirating larger volumes from dishes, flasks, or roller bottles.

…seals against foamed plastic gasket. Requires suitable external vacuum source such as water aspirator or vacuum pump. Accessory racks can be substituted for automatic samplers. Without vacuum source, vacuum tubing or vacuum trap. Normally, a 500 mL or larger vacuum filter flask is used as trap.…

…50ml (1), Cylinder, Graduated, Plastic (PP), 100ml (1), Evaporating Dish, Porcelain, 35ml (1), Filter Paper, 9cm dia, pk/100 (1), Flask, Boiling, 100ml (1), Flask, Boiling, 250ml (1), Flask, Erlenmeyer, Glass, 250ml (1), Flask, Erlenmeyer, Glass, 500ml (1), Flask, Volumetric, w/stopper,250ml (1),…

…replaceable polyurethane foam filter and air flow can be redirected to only the pegs in use by replacing the unused pegs with plugs (6 plugs included). Select from single and double-sided models with up to 76 peg locations to hold glass or plastic labware such as beakers, flasks, bottles, test tubes…