Pipet Glass 5 Ml

…square-cut ends Tip length of all 5 3/4" pipets is approximately 50 mm. Tip length of all 9" pipets is approximately 120 mm. Constriction approximately 25 mm from mouth end. Controlled Drop pipets deliver at a rate of 22-26 drops per mL. Intended for use with blood typing and…

…length of all 5 3/4" pipets is approximately 50 mm. Tip length of all 9" pipets is appoximately 120 mm. Easel-Pak pipets are packaged in easel-type dispenser boxes of 250 (case contains four boxes). Controlled Drop pipets deliver at a rate of 22-26 drops per mL. Intended for use…

…pipets are designed for cotton plugging. The uniform top-end openings permit performing of plugs and allow precise control of liquid column. Color-coded by size for easy identification and sorting. Colored graduations in 0.1 mL intervals are enameled onto the glass. The two rings indicate the pipet…

… N-51A borosilicate glass; color-coded, graduated scale Designed from ASTM Standard E-714 Tolerances: 1 mL pipet, ±0.02 mL ; 2 mL pipet, ± 0.4 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.30 mL Calibrated to tip, for blow-out, 7536S55 pipet is ungraduated below 0.92 mL; 7536S55 has a black…

Pipets are sterile, plugged and are excellent for transferring viscous or suspended liquids. Multi-packed in plastic bags (200 pieces each) to protect against contamination.

Store and track robust sample volumes with Thermo Scientific™ Matrix™ 2D Barcoded Glass Storage Tubes. Secure Tracking A permanently-bonded,unique 2D barcode is laser-etched onto the base of every Matrix 2D barcoded storage tube to securely identify and track samples Corresponding with a…

Pipets are color-coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. These “to deliver” pipets must be blown out to obtain total rated capacity. Reference: ASTM E-1044.

…lightweight cordless pipetting controller, which allows aspiration from bottles and tubes without the arm and hand elevations required with serological or volumetric pipettes. It fits all commonly used glass or plastic pipettes, but can also be used with Sartorius 5 ml and 10 ml disposable tips. The…

…pipet is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. Calibrated "to deliver" (TD) their total capacity without blow-out. Color-coded by size for easy identification. Colored graduations are enameled onto the glass. …

Pyrex® sterile multi-pack Designed for the larger volume user, these pipets are calibrated "to deliver" and are packed to permit easy access to several pipets at a time without contaminating the entire case Multi-packed plastic bags to ensure sterility Cotton-plugged …

…tempered tip 50 mL size is not color-coded; calibrated to deliver Tolerances: 1/10 mL pipet, ±0.005 mL ; 2/10 mL , ±0.008; 1 mL in 1/10, 1 mL in 1/100 and 2 mL pipets, ±0.02; 5 mL , ±0.04; 10 mL , ±0.06; 25 mL , ±0.10; 50 mL , ±0.16

…5 and 10 mL sizes of these pipets are almost 3” shorter than comparable disposable serological pipets The 25 mL size is 5” shorter than most comparable reusable pipets All sizes have negative graduations above zero mark; for serological work, ignore graduations and use pipet…

Disposable, Shorty, PYREX Glass Similar to 7536D49 series, but neither sterilized nor cotton-  plugged Markings removed by dichromate cleaning solution

These reusable PYREX® glass pipets are color-coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. They are calibrated "to deliver" (TD) their total capacity without blow-out. Reference: ASTM E-1293.

Disposable, sterile, PYREX® canister pack Calibrated "to deliver" Packaged in a flip-top canister to keep the pipets racked Sealed in polyethylene bags for sterility

Sterile, cotton-plugged, individually wrapped Individually wrapped in resealable plastic bags Borosilicate glass Tolerances: 1/2 mL pipet,± 0.013 mL ; 1 mL pipet, ±0.02 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.3 7536T48 pipets have black markings: remaining sizes have blue markings.

Disposable, sterile, PYREX® individually wrapped Calibrated "to deliver" Has negative graduations and fire-polished tips for burr-free, even flow rates Individually wrapped in Steri-View™ wrapping (one side paper, one side plastic) for easier identification and…

For Use With 0.1-100ml Glass and Plastic Pipettes.

…of suspensions and viscous materials Color-coded by size for easy identification and sorting Accu-Red graduations are permanently fused into the glass Two rings at the top indicate the pipet is calibrated “to deliver” its total capacity when the last drop is blown out.

Calibrated "to deliver" N-51A borosilicate glass Not sterilized or cotton-plugged Size 10 mL has constriction near top, forming chamber in which protective cotton plug can be inserted 7536U86 contain five shelf packs of 100 each.

…cotton-plug type, but plug is not supplied. N-51A glass. Designed from ASTM E1044, Style II requirements. Pipets are calibrated to tip; with volume adjusted for blowing out the last drop. Designated by a ground band near the top. Sizes 5 mL and larger are constricted to retain plug, but this…

…in 5 seconds and can be used for rapid filling of large pipets or breaking up cell clumps. Slow speed is ideal when using small pipets or when more precise delivery is required. These 3 speed ranges can be set for both fill and dispense rates. The unit provides up to 2 hours or continuous pipetting…

…in 5 seconds and can be used for rapid filling of large pipets or breaking up cell clumps. Slow speed is ideal when using small pipets or when more precise delivery is required. These 3 speed ranges can be set for both fill and dispense rates. The unit provides up to 2 hours or continuous pipetting…

… 0.5 to 100 mL pipette range Autoclavable Motorized and Ergonomic The labForce® Pipette Controller — Lightweight and ergonomically shaped motorized pipette controller designed for work with glass or plastic serological pipettes from 0.5 to 100 ml range. Conveniently…

These unbreakable, one-piece pipettes eliminate contaminated rubber bulbs, broken glass and exposure to infectious materials. They are made of ultra-clear, low density polyethylene (LDPE) and are ideal for microbiology, blood banking, hematology, immunology, and urinalysis. Sterile pipettes are…

…Quick and quiet pump fills a 25-mL pipette in 3 seconds Accepts glass or plastic serological pipettes, from 1 to 100 mL Avoid battery depletion with auto shut-off after 5 minutes of inactivity Easily fine tune pipetting speed with thumbwheel control and speedometer display Key…

…nozzle on the 10 mL model will accommodate glass and plastic serological pipets when an extra-long length is needed to reach the bottom of tall vessels. Simply insert the pipet into the nozzle and proceed with any task. An optional adapter accessory is available for the 5 mL model. Pipettors…

…pipetters and are useful for specimen storage, dilution and DNA sequencing 2 mL well volume Alpha-numeric well designations Same footprint as regular microplates Made in the USA Specifications: Material: Polypropylene Co-Polymer Chamfered Corners Bag Pack: 5 Case Quantity: 20

The LaMotte 5 mL plain pipette is mainly used to measure or transfer liquid samples while conducting experiments. It is suitable for use in research facilities and chemical laboratories. It is made of sturdy glass material which ensures long lasting usage.

…fit and deliver reliable performance every time. Stacked Rack • Non-sterile only • Tips and racks are manufactured from 100% virgin polypropylene and can be autoclaved • 200 tips/layer • For Small volume (250 mL) tips - 5 layers - 1000 tips • For Large volume (1250 mL) tips - 3 layers - 600 tips

…fit and deliver reliable performance every time. Stacked Rack • Non-sterile only • Tips and racks are manufactured from 100% virgin polypropylene and can be autoclaved • 200 tips/layer • For Small volume (250 mL) tips - 5 layers - 1000 tips • For Large volume (1250 mL) tips - 3 layers - 600 tips

…design - each layer is hinge locked to the next lower layer with a reusable hinged top for each layer as it’s uncovered • Environmentally friendly design uses less plastic • For Small volume (250 mL) tips - 5 layers - 960 tips • For Micro (25 mL) and Large volume (1250 mL) tips - 3 layers - 576 tips