Pinch Clamps

Compare Tool

Select up to 3 products

Pinch Clamps
1 - 32 of 40
Sort
View
Show
  • Pinch Clamps

    Thermo Scientific Nalgene

    All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.

  • Mohr's Pinch Clamps

    GSC International, Inc.

    Our nickel-plated spring-steel Mohr's pinch clamps are offered in two varieties - one that can clamp tubes up to 13mm in diameter and one that can fit tubes up to 19mm in diameter. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including nickel and lead, which are…

  • Made entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.

  • Pinch Clamp, Stainless Steel, Synthware, Various sizes available.

  • …steel clamps have bright, polished finish for years of chemical-impervious use and are made entirely of stainless steel — including springs, pins and knurled adjustment knobs Thomas Pinch Clamps are the undisputed industry leader for safety and security. Progressive springs make clamp

  • Technical Features: Fits 0.197 inch - 0.284 inch OD Tubing (5 mm - 7.2 mm)

  • Technical Features: Fits 0.45 inch OD Tubing (11.4 mm)

  • Technical Features: Fits 0.70 inch OD Tubing (17.8 mm)

  • Stainless steel Pinch clamps are for use with O-ring and ball and socket clamps All sizes except 1236D18 and 1236D20 have screw locking devices. Only screw locking clamps are recommended for O-ring joints. All clamps are made of 304 –18/8 Stainless Steel.

  • Cap type stoppers are used to seal unused ports on Air Sampling Manifolds. Use 7670 pinch clamp to secure caps to ports.

  • Vacuum trap assembly with o-ring flange connection. This design has flexibility and ease of assembly-disassembly for cleaning. Comes with Viton o-ring and stainless steel pinch clamp.

  • …O-Ring and provide greaseless, vacuum tight connection. All joints are held together with our 7669 family of pinch clamps, except for code -18 for which we use our 6509-03 two-piece clamp. O-rings are Fetfe and may be used up to 230 degrees C. Each joint is supplied with one o-ring. For replacement…

  • …one pre-trap, one main trap assembly, one main trap body, two CG-150-05 #28 S.S. pinch clamps, one CG-150-08 #50 S.S. pinch clamp, one CG-150-21 #75 S.S. pinch clamp, four CG-150-04 #18-L S.S. pinch clamps, one AF-0451-05 #9 o-ring joint cap stopper, one AF-0451-21 #30 o-ring joint cap stopper,…

  • …from glovebox to glovebox or to the vacuum line. Lower vessel has a flat bottom permitting it to be stood upright on the bench or in a glovebox. Top adapter has a 0-4mm Chem-Vac™ Chem-Cap® valve. Complete item is supplied with the corresponding CG-150 S.S. pinch clamp and one Viton o-ring.

  • …tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration and 15.5mm at the largest serration. Complete trap is supplied with a stopper, lower body, viton o-ring, and s.s. pinch clamp.

  • …or at the ends of the manifold with heavy wall rubber vacuum tubing. Serrated hose connection adapters list the OD of the hose connection at the middle ring. Each adapter is supplied complete with one #116 Viton o-ring. Adapters are to be attached to the manifold via a CG-150-05 S.S. pinch clamp.

  • …any aerosolized bacteria, and the entire assembly is nested neatly in a secondary container with a small footprint and incredible stability. A pinch clamp allows for modulation of vacuum. Other Vactrap options offer one bottle, or setups without secondary containment. Say goodbye to glass. Say…

  • Vactrap™ Vacuum Trap System

    Foxx Life Sciences

    …aerosolized bacteria, and the entire assembly is nested neatly in a Secondary Container with a small footprint and incredible stability. A pinch clamp allows for quick shutoff of vacuum. Other Vactrap options offer one bottle, or setups without secondary containment. Say goodbye to glass.…

  • Turbidity Tube, 60cm, Secchi Disc

    GSC International, Inc.

    …of the cloudiness of a fluid. To measure turbidity using this apparatus, fill the tube with water and drain it slowly by limiting flow with the pinch clamp on the hose. Stop draining once the black and white Secchi disk on the bottom of the tube becomes visible, and then take note of the water level…

  • …CONNECTION OF AF-0460 DIFFUSION PUMP. PLEASE CALL FOR DETAILS. Manifold complete with the dual trap assembly is 46" W x 23" H. Supplied complete with two #18 S.S. pinch clamps, three #35 S.S. pinch clamps, one #65 S.S. pinch clamps, two #112 Viton o-rings, and one #226 Viton o-ring.

  • …vacuum/inert manifold, one pre-trap, one main trap assembly, one main trap body, two CG-150-05 #28 S.S. pinch clamps, one CG-150-06 #35 S.S. pinch clamp, one CG-150-21 #75 S.S. pinch clamp, two CG-110-01 1/2" S.S. springs, one 14/20 outer stopper with hooks, and one CG-3014-05 35/25 socket…

  • …and validate. All EZBio® “MTO” Single Use Media Bottle Assembly, include, Bottle, Cap, Cap Insert, Tubing, HB Fittings, a Diptube, for accurate draw, a 0.22um Vent filter and a Ratchet Style Pinch Clamp.  Each finished is double bagged and Gamma Sterilized in the US.

  • …and validate. All EZBio® “MTO” Single Use Media Bottle Assembly, include, Bottle, Cap, Cap Insert, Tubing, HB Fittings, a Diptube, for accurate draw, a 0.22um Vent filter and a Ratchet Style Pinch Clamp.  Each finished is double bagged and Gamma Sterilized in the US.

  • …and validate. All EZBio® “MTO” Single Use Media Bottle Assembly, include, Bottle, Cap, Cap Insert, Tubing, HB Fittings, a Diptube, for accurate draw, a 0.22um Vent filter and a Ratchet Style Pinch Clamp.  Each finished is double bagged and Gamma Sterilized in the US.

  • …and validate. All EZBio® “MTO” Single Use Media Bottle Assembly, include, Bottle, Cap, Cap Insert, Tubing, HB Fittings, a Diptube, for accurate draw, a 0.22um Vent filter and a Ratchet Style Pinch Clamp.  Each finished is double bagged and Gamma Sterilized in the US.

  • …and validate. All EZBio® “MTO” Single Use Media Bottle Assembly, include, Bottle, Cap, Cap Insert, Tubing, HB Fittings, a Diptube, for accurate draw, a 0.22um Vent filter and a Ratchet Style Pinch Clamp.  Each finished is double bagged and Gamma Sterilized in the US.

  • …and validate. All EZBio® “MTO” Single Use Media Bottle Assembly, include, Bottle, Cap, Cap Insert, Tubing, HB Fittings, a Diptube, for accurate draw, a 0.22um Vent filter and a Ratchet Style Pinch Clamp.  Each finished is double bagged and Gamma Sterilized in the US.

  • …and validate. All EZBio® “MTO” Single Use Media Bottle Assembly, include, Bottle, Cap, Cap Insert, Tubing, HB Fittings, a Diptube, for accurate draw, a 0.22um Vent filter and a Ratchet Style Pinch Clamp.  Each finished is double bagged and Gamma Sterilized in the US.

  • …and validate. All EZBio® “MTO” Single Use Media Bottle Assembly, include, Bottle, Cap, Cap Insert, Tubing, HB Fittings, a Diptube, for accurate draw, a 0.22um Vent filter and a Ratchet Style Pinch Clamp.  Each finished is double bagged and Gamma Sterilized in the US.

  • …and validate. All EZBio® “MTO” Single Use Media Bottle Assembly, include, Bottle, Cap, Cap Insert, Tubing, HB Fittings, a Diptube, for accurate draw, a 0.22um Vent filter and a Ratchet Style Pinch Clamp.  Each finished is double bagged and Gamma Sterilized in the US.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.