This miniature DC motor is designed for experiments using low starting voltage (4.5V) and current (70mA). Speed: 1000-5000 RPM. Motor is approximately 34mm long x 24mm in diameter. Shaft size is 10mm long x 2mm in diameter. Includes soldered-on 7" lead with alligator clips.

Miniature LED yellow light bulb holder module for Genecon V3 The LED lamp can directly connect to Genecon V3 without any cables. Convenient in students’ experiments with energy consumption, comparison of lighting time between the miniature bulb and LED lamp using capacitor…

A contact key is used for experiments which require momentary current. The contact key is used to open or close a circuit. The key is mounted on a 3” x 4.5” x 3” black base with two binding posts. The arm of the contact key is plated metal with an insulated button.

This basic breadboard kit contains all of the basic connecting parts to start exploring circuit design. The kit includes a variety of connecting cord sizes and two breadboards. All that is required is to provide components such as resistors, LEDs, or capacitors. Kit Contents: …

This device can be used as a classic standard calorimeter or as an electric calorimeter. Made of aluminum and plastic, the calorimeter has a diameter of 10cm, height of 11cm, liquid capacity of 175ml, and a heat capacity of 25J/°C. Electrical requirements are 6V DC, up to 2A.

An insulated snap-on connector with 15cm red and black leads.

Flexible 18swg stranded wire cord with two way stackable banana plugs at both ends.

Our Digital Ammeters are simple, have an easy-to-read display, and run on a 9V battery. We sell several different ammeters with different ranges of measurable amperages. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene and lead, which are known to…

This 3V conductivity tester demonstrates the electrical properties of various liquids. The item consists of a molded plastic lamp socket mounted on a base with 2 binding posts for connecting a wire cord. It comes complete with bulb, glass tumbler, and instruction manual.

Digital Multimeter, 200mV - 1000V, ±0.5% ±2Digit Large, LCD, 3 1/2 digit display Battery, testing leads and instructions included Perfect for any physics or home laboratory Digital Multimeter. Great tool for any physics or home laboratory. Multimeter measures 5" tall, 2.75" wide and 1" long.…

Solar motor is specifically designed for experiments using low starting voltage (0.5V) and current (25mA). Speed: 1000-5000 RPM. Motor is approximately 38mm long x 24mm in diameter. Shaft size is 8mm long x 2mm in diameter. Includes soldered-on 4" wire leads.

The 630-point solderless breadboard is built with high-quality construction that can withstand repeated use. It includes color coordinates that are screen-printed for easy reference. This breadboard is perfect for investigating circuit designs and prototyping. It accepts most electronic components…

Van De Graaff Generator that can be run on both a motor and a hand crank Motor has adjustable speeds and is compatible with 110/120V and 220/240V Hand crank up to 100kV Sturdy 6" x 8" base with both the components securely mounted Approximately 22" tall This Van De Graaff Generator can be…

This economical seven piece kit lets you demonstrate the conversion between different forms of energy. It includes four devices for generating electrical energy from mechanical motion (hand generator), chemical energy (batteries), light (solar energy), and wind (windmill) and three devices for…

Friction Rods are 12"; long unless noted. Excellent for demonstrating static electricity

Knife Switches for low voltage experiments (less than 36V) with plastic bases. These items are available with either thumbscrew or spring binding posts.

Our meters are mounted in black plastic cases. Meters have a scale length of 75mm, offer +/- 2.5% accuracy and come with 5-way binding post and external calibrating screw. Meters are not protected against prolonged or significant overload. Stackable for storage.

This apparatus helps students to observe energy transfer and conversion and investigate the systems that keep homes comfortable and safe. The suggested activities below will: explore the relationship between parallel circuits and current; understand how thermostats and circuit breakers operate; and…

The meters are ideal for numerous electrical and laboratory experiments. Full scale and fully enclosed, with accuracy +/- 2.5%, and a 7.5 cm scale length. Color Coded. Supplied with binding posts and external zero-adjustment.

Our flat metal electrodes are 18mm by 100mm (approximately 0.75" by 4"). We carry electrodes made from seven different metals: aluminum, brass, copper, iron, zinc, nickel, and tin. Use them in your own experiments with electricity.   PRODUCT WARNINGS WARNING: …

The connector cord set have Cross-Patch/Stacking Banana Plugs on one end and a Alligator Clip on the other end. The alligator clip has an insulated sleeve for safety and the cords are flexible and durable. The set includes 6 cords; 3 black and 3 red.

The Electrostatic System Physics Kit includes 26 components for 11 guided activities. With this kit students can explore common experiments such as The Gold Leaf Electroscope, Positive and Negative Charges, Insulators and Conductors, and Coulomb’s Law. Includes 11 experiment guides: Exploring…

Contains Hollow Friction Rod, Solid Friction Rod, 1/2 Ground Friction Rod, Ebonite Rod, Wool Pad, Silk Pad, Faux Fur Pad, 3-Balloons and 10 feet of String. Instructions included.

Fahnestock Clips supplied in packs of ten.

A Wheatstone Bridge is a tool that can be used to determine an unknown electrical resistance within a circuit by comparing known resistances to the unknown resistance value. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene, nickel, and lead, which…

Build your own series circuit using the handy Create-A-Circuit-Kit. It comes complete with a "D" cell battery holder, a knife switch, two miniature light bulbs, two lamp holders, and four connector cords. Instructions are included.

This electroscope is housed in a 250ml borosilicate glass flask with a metal rod attached to a rubber stopper. A pair of aluminum leaves is suspended from an alligator clip. The knob on top of the rubber stopper accepts a charge. When the charge enters the flask, the aluminum leaves separate. Also…

Connector cords are useful in various electricity experiments, as well as in many apparatuses that require connections to power supplies. All of our connector cords are made of 18-gauge insulated wire. These connector cords have alligator-clips on each end. Alligator-clip ends are useful for useful…

MOTOR DRIVEN VAN DE GRAAFF Perfect for demonstrating energy transformation from mechanical to electrical. This motor driven Van De Graaff is excellent for physics classrooms and exciting for learners of all ages UP TO 220,000 VOLTS Apparatus can generate an electrostatic charge of up to…

Flexible, 18swg stranded wire cord with alligator clips at both ends. Alligator clips have protective vinyl sheath.

This comprehensive kit allows students to plot equipotential lines in an electric field between two electrodes held at different electric potentials. A simple setup keeps electrodes partially immersed in water containing an electrolyte, allowing a small current to flow between the…