Phosphate Buffer Solution 7.2

Density (g/cm3): 0.995

Density: 0.995 g/mL at 25 °C General description: Visit our Titration Center to learn more. Packaging: 2 L in poly bottle Packaging: 500 mL in poly bottle

Phosphate buffer solutions are used in hematology, for the dilution of staining solutions and for the rinsing steps in the staining process. The buffer tablets acc. to Weise will produce a buffered solution (pH6.4/pH6.8/pH7.2) that stabilizes the staining result and gives reproducible staining…

PBS (phosphate buffered saline) is a balanced salt solution used for a variety biological and cell culture Applications , such as washing cells before dissociation, transporting cells or tissue, diluting cells for counting, and preparing reagents. Applications PBS is also useful in…

PBS (phosphate buffered saline) is a balanced salt solution used for a variety biological and cell culture applications, such as washing cells before dissociation, transporting cells or tissue, diluting cells for counting, and preparing reagents. Endotoxin and Mycoplasma tested Applications …

…product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. 10X Phosphate Buffered Saline (PBS) consists of 0.2 M Potassium Phosphate, 1.5 M Sodium Chloride, pH 7.2 prepared in highly polished…

…Phosphate, monobasic (NaH₂PO₄xH₂O) 0.2M, pH range 5.8 - 8.0 Shipping Conditions: Ambient Temperature Maximum shelf life after receipt: 3 months The osmolarity of a 0.1 M at a pH 7.2 is 226 mosmols; with the addition of 0.18 M of sucrose to the solution,…

Phosphate Buffered Saline 10X pH 7.2 with Azide (0.2 M Potassium Phosphate 1.5 M Sodium Chloride 0.1% (w/v) Sodium Azide) is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. 10X PBS pH 7.2 with Azide…

…saline (PBS) is a buffer solution used in biological research. It is a water-based salt solution containing sodium phosphate, sodium chloride and, in some formulations, it contains potassium chloride and potassium phosphate. The osmolality and ion concentrations of the solutions match those of the…

…II™, Phosphate Buffer with Magnesium Chloride, dilution blank, 90ml fill, 145ml polypropylene bottle with hinged cap Phosphate buffer with magnesium chloride meets or exceeds requirements for APHA, EPA water and wastewater methods, and the dairy industry. The pH is 7.2 +/- 0.2 …

Phosphate buffer with magnesium chloride meets or exceeds requirements for APHA, EPA water and wastewater methods, and the dairy industry. The pH is 7.2 +/- 0.2 Pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or…

Phosphate Buffered Salts, Dulbecco's Formula (DPBS) is a balanced salt solution (BSS) used for the handling and culturing of mammalian cells. DPBS is used to to irrigate, wash, and dilute mammalian cells. Phosphate buffering maintains the pH in the physiological range. Calcium and magnesium…

Dulbecco’s Phosphate Buffered Saline 10X is a stock solution used to prepare 1X D-PBS in cell culture grade water. D-PBS is used to wash cells during preparation and serial transfer Phosphate buffering maintains the pH in the physiological range. Calcium and magnesium facilitate cell binding…

…is a 10X concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration.  Dilute only prior to immediate use. 10X Phosphate Buffered Saline (PBS) consists of 0.2 M Potassium Phosphate, 1.5 M Sodium Chloride and 0.5%…

…description Mouse polyclonal antibody raised against a full-length human AIM2 protein. Physical form Clear, colorless solution in phosphate buffered saline, pH 7.2 Features and Benefits Antibody Bioguarantee Evaluate our antibodies with complete peace of mind. If the antibody does…

… Physical form: Solution in phosphate buffered saline, pH 7.2

…is also involved in the development of autoimmune diseases. IgG1 regulates complement fixation in mice. Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.2, containing 15 mM sodium azide Analysis Note: Immunoelectrophoresis (IEP) is used to establish the identity of the Rabbit…

…using extracts of MCF7 cells at a working dilution of 1:3000. It may also be used for dot blot. Immunogen: synthetic peptide corresponding to amino acids 18-32 of the human estrogen receptor. Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.2, containing 15 mM sodium azide.

…orange when using buffer solutions pH 6.8. Buffer solution acc. to Weise pH 7.2 produces grayish stained erythrocytes and intense red-violet stained cells with nuclei. 100 tablets are sufficient for 100 l buffer solution, each produced solution can be stable up to 4 weeks. Buffer tablets acc. to…

Bacto™ FA Buffer, Dried is a phosphate buffer-NaCl mixture which upon rehydration, yields a 0.85% saline solution buffered to pH 7.2. It is used for making dilutions of rehydrated FA Antimicrobial Globulins for test purposes as well as washing slides in FA staining processes. It is also…

… Fixation for 24 to 48 hours in a 3% glutaraldehyde, 0.1M PIPES solution buffered with NaOH to pH 7.6. Rinse the PIPES buffer for 20 minutes, using three changes. Post fixation is with 1% 0s04 with 0.1M PIPES buffer for 1 - 2 hours. 19230 - PIPES - C8H18N206S2 M.W. 353.3 - 25G

…or replacement antibody. Learn more. Immunogen: Swine IgG whole molecule Physical form: Supplied in 0.02 M Potassium Phosphate, 0.15 M Sodium Chloride, pH 7.2 Physical properties: Antibody format: IgG Specificity: This product was prepared from monospecific antiserum by immunoaffinity…

…or replacement antibody. Learn more. Immunogen: Rabbit IgG whole molecule Physical form: Supplied in 0.02 M Potassium Phosphate, 0.15 M Sodium Chloride, pH 7.2 Physical properties: Antibody format: IgG Specificity: This product was prepared from monospecific antiserum by immunoaffinity…

…or replacement antibody. Learn more. Immunogen: Human IgG whole molecule Physical form: Supplied in 0.02 M Potassium Phosphate, 0.15 M Sodium Chloride, pH 7.2 Physical properties: Antibody format: IgG Specificity: This product was prepared from monospecific antiserum by immunoaffinity…

…replacement antibody. Learn more. Immunogen: Human IgA alpha heavy chain Physical form: Supplied in 0.02 M Potassium Phosphate, 0.15 M Sodium Chloride, pH 7.2 Physical properties: Antibody format: IgG Specificity: This product was prepared from monospecific antiserum by immunoaffinity…

…or replacement antibody. Learn more. Immunogen: Horse IgG F(c) fragment Physical form: Supplied in 0.02 M Potassium Phosphate, 0.15 M Sodium Chloride, pH 7.2 Physical properties: Antibody format: IgG Specificity: This product was prepared from monospecific antiserum by immunoaffinity…

…or replacement antibody. Learn more. Immunogen: Donkey IgG whole molecule Physical form: Supplied in 0.02 M Potassium Phosphate, 0.15 M Sodium Chloride, pH 7.2 Physical properties: Antibody format: IgG Specificity: This product was prepared from monospecific antiserum by immunoaffinity…

…or replacement antibody. Learn more. Immunogen: Horse IgG whole molecule Physical form: Supplied in 0.01 M Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2 Physical properties: Antibody format: IgG Specificity: This product was prepared from monospecific antiserum by immunoaffinity…

…or replacement antibody. Learn more. Immunogen: Mouse IgG1 heavy chain Physical form: Supplied in 0.02 M Potassium Phosphate, 0.15 M Sodium Chloride, pH 7.2 Physical properties: Antibody format: IgG Specificity: This product was prepared from monospecific antiserum by immunoaffinity…

…or replacement antibody. Learn more. Immunogen: Rat IgG whole molecule Physical form: Supplied in 0.02 M Potassium Phosphate, 0.15 M Sodium Chloride, pH 7.2 Physical properties: Antibody format: IgG Specificity: This product was prepared from monospecific antiserum by immunoaffinity…

…antibody. Learn more. Immunogen: Golden Syrian Hamster IgG whole molecule Physical form: Supplied in 0.02 M Potassium Phosphate, 0.15 M Sodium Chloride, pH 7.2 Physical properties: Antibody format: IgG Specificity: This product was prepared from monospecific antiserum by immunoaffinity…