Ph Electrode Bnc

…solutions' pH measurement in scientific research, environmental monitoring, and quality control. Measurement Range: 0–14 pH, 0–80°C (32–176°F) Housing: Polycarbonate Junction: Single Ceramic Reference Electrode: Ag/AgCl Connector: BNC Size: ø12x160…

…Diameter: 12mm Membrane Shape: hemispherical Range: 0-14 pH Temp. Range: -5 to 100°C (23 to 212°F) Connector: BNC Cable: 3 Ft The electrode uses a BNC connector, compatible with any pH meters that use BNC connectors. Temperature sensor is not built-in. Users need to…

…0–14 pH, 0–80°C (32–176°F) Housing: Polycarbonate Junction: Single Ceramic Reference Electrode: Ag/AgCl Connector: BNC for pH, RCA for temperature Size: ø12x160 mm Cable: 3 Ft Temperature unit: 30KΩ Thermistor Compatible labForce pH…

Measure the pH of virtually any sample with these Thermo Scientific Orion pH electrodes. Electrodes come with a low cost epoxy body Sealed, gel-filled design means there is little electrode maintenance to perform Single-junction reference means electrodes are suited to most general…

… AquaShock® pH ORP Kit 850064K Measures pH, mV & ORP (Oxygen Reduction Potential) and temperature 5 calibration points Automatic buffer recognition Recalls electrode offset, slope and last calibration Includes AquaShock® pH/ORP Meter 850064; ATC pH probe; AC adaptor;…

…on ORPTestr 10 lets you reuse meter body many times without losing waterproof and dustproof protection. Large surface area platinum band sensor gives a faster, more stable response. ORPTestr BNC accepts any ORP electrode with BNC connector; order electrode separately, WD-35805-15 ( 1213W61) .

Durable and chemically compatible Ultem® or body, reliable and accurate over the full range of pH measurements, no refilling or maintenance required with sealed gel-filled design, instantly ready for use.

… pH range: 0-14 Temperature range: 0-90°C Recommended for general purpose use. Built-in thermistor for automatic temperature compensation. Useful for field pH measurements with Thermo Orion portable pH meters. BNC type connector. ATC connection to meter via DIN connector. Electrode…

…12 mm diameter with maximum 176F (80C) temperature. Combine durability with reliability Epoxy-body housing resists impact Ideal for general purpose lab and field applications Compatible with most brands of pH meters What's Included: 3.3-ft (1-m) cable with BNC connector

…glass electrode and sealed Ag-AgCl reference electrode in a single stem Range pH 0 to 14, 0° to 100°C Usable at pressures from 0 to 100 psig (690 kPa) Offered in choice of types, each with US Standard or BNC Connector The flat-tip electrodes have pH electrode and porous…

Includes a FREE electrode saver bottle to extend electrode life Feature a BNC connector for pH and a phono jack connector for temperature Each All-in-One Acorn electrode features a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a…

… Each electrode is 12 mm diameter with a 3 foot cable Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life Feature a BNC connector for pH and a mini phono plug connector for temperature Use with pH 10, pH 100, pH 500, pH 1000, pH 2500 meters …

…3-in-1 combination electrodes are excellent choices for applications requiring pH, reference, and automatic temperature compensation (ATC). The 3-in-1 electrode operates like three separate electrodes, at a value price, you would pay for only one electrode. These electrodes are designed to…

1198F11: Science pHT-Pt; pH electrode with temperature, double-junction, Platinum junction, 3 in 1, glass shaft with 1-m cable, BNC connector, 1 banana plug, NTC 30 kOhm. Dimensions = 170 mm length; 12 mm OD. 1198F12: Science pHT-G; pH electrode with temperature, double-junction, 3 in 1,…

pH Electrode Connector Cables, compatible with Mettler Toledo pH meters.

…length of an electrode cable by 15′ (4.57m) when using the Thermo Scientific™ Orion™ Electrode Extension Cables. Can be used with Orion ATC probes, any reference electrode with 2mm pin tip connector or any electrode with a BNC connector. Orion™ Electrode Adapter Cables…

If you deal with a wide variety of chemicals or any aggressive substances, a glass probe like our pH1400 is a safe choice due to the chemically inert properties of glass. This single junction electrode has a refillable reference cell.

Hach Platinum Series pH probe is a standard combination pH probe with a replaceable gel reference and built-in temperature sensor. Probe comes with two electrolyte cartridges and has a fixed cable with BNC and DIN connectors compatible Hach EC series meters. Maximum life through reduced…

When used with any standard pH meter, the Orion™ 97-08 Oxygen electrode simplifies routine dissolved oxygen measurements, especially for biochemical oxygen demand (BOD). Polarographic O₂ sensor plus solid-state circuitry in probe top; converts current to voltage for direct…

pH Gel Filled Combination Electrode, BNC and 3.5 mm phone connectors (use with Hach One meters)

Flat measurement tip for surface measurements and slurries, double junction electrode design prevents reference contamination, durable Ultem® body, booted BNC protects meter connection.

Robust plastic pH electrode with refillable liquid electrolyte, suitable for simple applications, with BNC connector Economic & easy pH electrode Robust plastic pH electrode suitable for simple applications and easy samples such as water; low-maintenance; refillable electrolyte …

…pH 17; pH electrode no temperature, single-junction, combination, refillable, glass shaft with 1-m cable, BNC connector. Dimensions = 120 mm length; 12 mm OD. 1198F08: TruLine pH 21; pH electrode no temperature, single-junction, combination, spear tip membrane, epoxy shaft with 1-m cable, BNC…

Our pH2400 has a double junction reference design to prevent fouling by sample contaminants that interact with Silver (Ag). The refillable reference junction allows users to replace the liquid fill solution as it becomes depleted or contaminated, instead of replacing the whole sensor.

…(10mm) cap BNC Connector A routine wick junction, gel-filled pH measurement electrode with extended unbreakable epoxy body beyond the pH sensing glass bulb for rugged conditions The Thermo Scientific Orion Low-Maintainance Combination pH Electrode is ideal for routine pH measurement.…

…gel-filled electrode. Its unbreakable epoxy body extends beyond the pH sensing glass bulb for rugged conditions. It provides durability for lab or field use with a low-maintenance design that requires no fill solution. Permanently gelled Ag/AgCl electrolyte 0 to 12 pH range BNC…

The research grade pH3400 is a highly versatile combination pH electrode, specially designed to respond quickly and accurately to rapid temperature changes.

Plastic shaft, fibre-junction, gel electrolyte Ag/AgCl-reference system, cylinder membrane A glass, 2 m fixed cable with BNC plug, length 120 mm, 12 mm Ø -5...+80 °C, 0...14 pH

Adapter for connecting pH electrodes with BNC plug to a meter with DIN socket.

… Waterproof BNC connector is impervious to water Orion green electrodes offer a lab or field pH electrode that meets all RoHS requirements. This line of electrodes has 4 different electrodes to choose from. Users have the option of selecting gel-filled or refillable electrodes depending on…

…junction electrode for testing gels and semisolids . Spear tip pH electrode, glass body, sealed Electrodes have a BNC connector, and are 12 mm dia with a 3 ft cable Includes a FREE electrode saver bottle to extend electrode life Use with all OAKTON pH meters except pH Wand and…