Ph Buffer Solutions 14

1.68, 4.01, 6.86, 7.00, 9.18, 10.01, and 12.45 buffer solutions are available in 250 mL bottles.

…pH (IP67) Display resolution: 0.01 pH Accuracy: ±0.05 pH Automatic Temp. Comp. ( ATC 0+60°C) Self calibration in 2 points ( pH4 / pH7 or Ph 7/ pH10) Use temperature display With buffer solutions pH 4 - pH 7- pH 10 In plastic box with instructions Range : 0-14 pH

Our complete range of patented buffer solutions provide pH stability of up to five years. High buffering capacity provides rapid and stable calibration.

PBS (phosphate buffered saline) is a balanced salt solution used for a variety biological and cell culture applications, such as washing cells before dissociation, transporting cells or tissue, diluting cells for counting, and preparing reagents. Endotoxin and Mycoplasma tested Applications …

PBS (phosphate buffered saline) is a balanced salt solution used for a variety biological and cell culture applications, such as washing cells before dissociation, transporting cells or tissue, diluting cells for counting, and preparing reagents. Endotoxin and Mycoplasma tested Applications …

…Combination (4136N71) Ideal for routine and high temperature pH measurement for small samples Range 0-14 pH at temperatures from 0° to 100°C Applications: general pH, tris buffers and non-aqueous solutions. AgCl sealed by ion exchange barrier; 238 x 6.3 mm. Rugged…

…samples, colloids, soils and slurries Has optimum flow rate for high purity waters, drinking waters and buffers Produces fast, stable responses in samples that vary in temperature pH range is 0-14 over a temperature range of 0°-100°C Epoxy Body Combination Electrode…

…highly alkaline solutions. Your sample is not contaminated by indicator dyes. Consequently, you can use the solution for further analysis. The special non-bleeding technology provides additional benefits for you: Even in weakly buffered solutions, a safe and reliable pH determination…

…neutral point (pH 7.00) to conveniently view trends in acidity or alkalinity Temperature measurements with Atomatic Temperature Compensation 1, 2 or 3 point calibration automatically recognizes buffer solutions. Order pH buffers separately Complete with flat surface pH electrode, protective…

The labForce pHE-04 Combination pH Electrode is ideal for precise regular water solutions pH measurement in scientific research and quality control. This electrode is compatible with TRIS buffer solutions. Its blue hemispherical glass membrane has a faster response time, better repeatability,…

MDL No: MFCD00134130 Liquid

MDL No: MFCD00147253 Liquid

MDL No: MFCD00146252 Liquid

This product is ready-to-use as a working 1X solution and requires no further dilution. This buffer consists of  50 mM Tris HCl, 10 mM Magnesium Sulfate at pH 7.5 and was prepared using ultra pure reagents dissolved in pharmaceutical grade deionized water.

Tris HCl solution is suitable for molecular immunology, molecular biology and nucleic acid methodologies, when applicable. This buffer consists of 1.0 M Tris HCl at pH 8.5. Meticulously prepared using ultra pure reagents dissolved in highly polished pharmaceutical grade (WFI) water. This product…

Tris HCl solution is suitable for molecular immunology, molecular biology and nucleic acid methodologies, when applicable. This buffer consists of 1.0 M Tris HCl at pH 7.4. This product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or…

1.0 M Tris HCl pH 7.8 is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 1.0 M Tris HCl at pH 7.8. Meticulously prepared using ultra pure reagents dissolved in highly polished…

Ethylenediaminetetraacetic acid is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 0.5 M Trisodium EDTA at pH 8.0.  Meticulously prepared using ultra pure reagents dissolved…

…when applicable. This product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 1.0 M Tris HCl at pH 7.6. Meticulously prepared using ultra pure reagents dissolved…

…when applicable. This product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 1.0 M Tris HCl at pH 9.0.  Meticulously prepared using ultra pure reagents dissolved…

…when applicable. This product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 1.0 M Tris HCl at pH 8.0.  Meticulously prepared using ultra pure reagents dissolved…

…when applicable. This product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of  1.0 M Tris HCl at pH 7.2.  Meticulously prepared using ultra pure reagents dissolved…

This product is ready-to-use as a working 1X solution and requires no further dilution. This buffer consists of 60 mM Calcium Chloride, 15% v/v Glycerol, 10mM Tris HCl at a pH of 7.5.  Meticulously prepared using ultra pure reagents dissolved in highly polished pharmaceutical grade deionized water.

This product is a 10X concentrated stock solution and should be diluted appropriately with distilled, deionized water (or equivalent) to its final working concentration. No pH adjustment is required.

BBS is isotonic and has a strong bactericidal effect. It can be used to dilute solutions for coating procedures. Additives such as Tween 20 and Blotto can be used to add functionality as a washing buffer or blocking buffer.

(acetic acid/sodium acetate) traceable to SRM from NIST and PTB pH 4.66 (20°C) Synonyms Buffer solution pH 4.66 HS Code 3822 00 00

This product is a 10X concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. 10X Tris-Phosphate EDTA (TPE) consists of 0.9 M Tris-Phosphate, 0.02 M EDTA at a pH of 8.0.  Meticulously prepared using ultra pure…

1X buffer used to lyse cells under non-denaturing conditions. 1X Formulation: TRIS HCI: (pH 7.4) 50 mM NaCI: 150 mM TritonX-100: 1% EDTA: 5 mM

Synonym: Tris hydrochloride solution General Description A series of Pre-mixed solutions of TRIZMA Base and TRIZMA HCl to provide commonly used pH values for Tris buffers. No mixing or pH adjustment necessary. Guaranteed accuracy ± 0.1 pH units. Legal Information Trizma…

Sodium Ethanoate is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer contains 3.0 M Sodium Acetate at pH 5.2 meticulously prepared using ultra pure reagents dissolved in highly polished…

This product is ready-to-use as a working 1X solution and requires no further dilution. This buffer consists of 10 mM Tris HCl and 1.0 mM EDTA at a pH of 8.0.  Meticulously prepared using ultra pure reagents dissolved in DEPC treated pharmaceutical grade deionized water.

…to its final working concentration. 2X SDS-PAGE Sample Buffer consists of 0.125 M Tris, 4% (w/v) SDS, 20% (v/v) Glycerol and 0.01% (w/v) bromophenol blue.  This product is not reduced and does not contain DTT or b-ME. The pH of this solution is 6.8.  It was meticulously prepared using ultra pure…