Pestle Motor

…grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. The clearance between the ground tube and pestle is approximately 0.15mm. The parts are ground to a medium grind to insure adequate abrasive qualities, yet deliver a fine homogenous sample. …

…tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 1, 5, 8, 17 and 45 mL . * Stated clearances for the tubes and pestles are “total” not…

Similar to 3432N01 series, but with PTFE pestle and an unground glass tube Ideal for soft tissue such as brain or liver Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit). Available in working…

Similar to 3432N40 series, but with PTFE pestle and an unground glass tube Ideal for soft tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 0.5, 1, 3, 5, 8,…

…Clearance between pestles and tubes is 0.004 to 0.006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Duall tissue grinder with glass pestle and ground glass tube progressively grinds tissue samples into a fine, uniform homogenate. As the pestle is forced…

Borosilicate glass Especially for soft tissues Stainless steel rod is long enough to chuck into a suitable drive motor

…brain. They are designed to handle both initial grinding and final homogenization in the same sequence of operations. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. Caution: If used with a motor-driven device, the…

…electronic motor controller provides versatile and reliable performance. Controller also provides smooth rotation and repeatability, reduced motor temperature and noise due to filtered circuitry. A switch reverses pestle direction during homogenization or allows either motor shaft to rotate…

For all Kontes pellet pestle mixers Compact, hand-held unit Motor driven Comes complete with two “AA” batteries. Dimensions: 3” Dia. x 6” L.

…protein and DNA pellets or grind soft tissues in micro centrifuge tubes Pestles can be hand operated or motor driven Autoclavable types available Ideal for cell and tissue culture preparation Choose the best pellet pestle for your applications RNase-, DNase- and Pyrogen-free Individually…

…however any lab stand would be appropriate. Stand is sold separately. ( stand 1981-30000) Permanent magnet motor, 5/16"od shafts High speed shaft: 4000rpm (26 in-lb torque) Low speed shaft: 333rpm (3.6 in-lb torque) Electronic motor controller Switch for reversing pestle direction Power: 115v

…however any lab stand would be appropriate. Stand is sold separately. ( stand 1981-30000) Permanent magnet motor, 5/16"od shafts High speed shaft: 4000rpm (26 in-lb torque) Low speed shaft: 333rpm (3.6 in-lb torque) Electronic motor controller Switch for reversing pestle direction Power: 230v

…tube wall and the pestle. Use with the hand-held Homogenizer Motor for optimal processing efficiency particularly when handling large numbers of samples. Result: the best homogenization of precipitates or cells in the industry Key Features: Tubes and Pestles made of animal and…

…6.5” x 3” x 1.5” PESTLE MOTOR FOR PELLET PESTLE MIXERS, CORDLESS, Handheld, battery-powered motor designed to drive disposable polypropylene pestles in 0.5 and 1.5mL microcentrifuge tubes. The tip adapter securely holds the pestles while in operation. Protein and DNA pellets,…

…glass With precision made interchangeable pestles and tubes Clearance between pestle and tube 0.1 - 0.15 mm Designed for hand operation, but can be slow-speed motor driven by inserting a rubber stopper and metal rod into pestle Hollow handle permits packing with ice …

These PYREX® homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action to…

…studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. Caution: If used with…

…for re-suspending pellets or disrupting soft tissue in micro tubes Ideal for tissue of animal, bacteria, yeast, plant samples, etc. Accessories: Two rechargeable batteries One charger Disposable pestles Stainless steel pestle, autoclatable (not included in base unit)

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 5ml

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 30ml

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 1ml

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 3ml

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 50ml

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 15ml