Pes Filter Units

…“grips” make the filter units and storage bottles easy to handle Wide base improves stability on the bench top Nalgene PES: The best choice for cell culture Polyethersulfone (PES) is the ultimate tissue culture membrane. It’s fast and clean. PES is low protein…

…Nalgene 165, 166, 167, 168 and 169 Polyethersulfone (PES) membranes Sterile Fast flow rate Non-cytotoxic and non-pyrogenic Meet biological and pharmaceutical sterilization requirements Ideal for cell and tissue culture applications. PES membrane is hydrophilic, lower protein binding and…

…volumes to filter up to 10 L or 20 L of fluid. Both sizes are equipped with the low protein-binding, fast flow 0.22 µm pore Millipore Express® membranes. Units are supplied sterile and ready to connect to a pump or pressure vessel. Millipore Express® PLUS PES membrane…

Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig…

…selection of filter media in convenient sterile disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives are not used so you can be assured filtrates will not be adulterated. Each unit is marked with…

Polystyrene housing, PES membrane, 0.1µm Ultra-clean sterilization of media protects against mycoplasma and bacteria contamination in biotech and pharmaceutical R&D and scale up applications. Fast-flowing PES membrane with outstanding throughput and low protein binding. Graduations on uppers…

…as microbiological media. Nalgene 122 Filter Units with Surfactant-Free Cellulose Acetate (SFCA) Membranes(4619A58, A62) Low protein binding Minimal clogging with no loss of specific proteins Nalgene 124 Filter Units with Polyethersulfone (PES) Membranes (4619B01) Low protein binding…

…and cost-saving solutions thanks to: Polyether sulfone (PES) membrane filter “High-flow” membrane for high throughput rates and low protein binding Filtropur V50 and BT 50 with 0.1 μm PES membrane for efficient prevention/removal of mycoplasms from…

…sides and “grips” make the filter units and storage bottles easy to handle Wide base improves stability on the bench top Nalgene PES: The best choice for cell culture Polyethersulfone (PES) is the ultimate tissue culture membrane. It’s fast and clean. PES is low protein binding, so…

…filters - Automation-compatible, non-sterile Millex® syringe filter units have a domed housing which enables smooth, reliable delivery in automated sample preparation workstations by eliminating shingling between filters on the transport rack. Non-sterile HPF Millex® filters…

…housing 50 mm Supor® machV PES membrane 115 mL capacity The 524 is an economical asymmetric polyethersulfone filter unit that is suitable for small-volume benchtop filtration. Wide, stable base design. Pore size (0.2 µm) and membrane type are printed in easy-to-see Blue on the side of each unit.

Sartolab® RF 50, PES, vacuum filtration units are single-use units for the sterile filtration of sample volumes up to 50 mL. User Benefits Highest flow rates with an asymmetric membrane and a large surface area No loss of protein with a very low protein binding membrane Low…

…purification. The filter systems are manufactured in a Class 100,000 clean room, from USP class VI virgin polystyrene. The filter membrane is Polyethersulfone (PES) material in 0.22µm or 0.45µm pore sizes for rapid flow rate and low protein binding. The filter units are available in…

…filtration units designed for the removal of particles or bacteria from aqueous or solvent solutions and gas streams. They are ready to use, eliminating the need to disassemble, clean, and reassemble filter housings. GVS capsules contain no glue or surfactants and feature serial layer filter…

…filtration units designed for the removal of particles or bacteria from aqueous or solvent solutions and gas streams. They are ready to use, eliminating the need to disassemble, clean, and reassemble filter housings. GVS capsules contain no glue or surfactants and feature serial layer filter…

…filtration units designed for the removal of particles or bacteria from aqueous or solvent solutions and gas streams. They are ready to use, eliminating the need to disassemble, clean, and reassemble filter housings. GVS capsules contain no glue or surfactants and feature serial layer filter…

…filtration units designed for the removal of particles or bacteria from aqueous or solvent solutions and gas streams. They are ready to use, eliminating the need to disassemble, clean, and reassemble filter housings. GVS capsules contain no glue or surfactants and feature serial layer filter…

…filtration units designed for the removal of particles or bacteria from aqueous or solvent solutions and gas streams. They are ready to use, eliminating the need to disassemble, clean, and reassemble filter housings. GVS capsules contain no glue or surfactants and feature serial layer filter…

…filtration units designed for the removal of particles or bacteria from aqueous or solvent solutions and gas streams. They are ready to use, eliminating the need to disassemble, clean, and reassemble filter housings. GVS capsules contain no glue or surfactants and feature serial layer filter…

…filtration units designed for the removal of particles or bacteria from aqueous or solvent solutions and gas streams. They are ready to use, eliminating the need to disassemble, clean, and reassemble filter housings. GVS capsules contain no glue or surfactants and feature serial layer filter…

Filters – 50mL Centrifuge Tube – Filter Unit & Stand Polyethersulfone (PES) membrane for high flow and low binding Two membrane pore sizes: 0.22 or 0.45μm Centrifuge Tube Filter systems include tube filter, centrifuge tube and cap Eliminate a sample transfer step…

CELLTREAT® Vacuum Filter Systems and Bottle Top Filters are ideal for large volume sample separation and purification. The filter units are manufactured in a Class 100,000 clean room, from USP class VI virgin polystyrene. The filter membrane is Polyethersulfone (PES) material in 0.22µm or…

…bottles. Units have molded-in graduations. Side-arm has a quick-disconnect tubing adapter and blue collar. Model 1234K62 filter cap has a 500 mL capacity and fits a 33 mm neck size bottle. Model 1234K63 filter cap has a 500 mL capacity and fits a 45 mm neck size bottle. Both filters have 75 mm…

…bottles. Units have molded-in graduations. Sidearm has a quick-disconnect tubing adapter and BLUE collar. Model 1234K66 filter cap has a 1000 mL capacity and fits a 33 mm neck size bottle. Model 1234K67 filter cap has a 1000 mL capacity and fits a 45 mm neck size bottle. Both filters have 90 mm…

…sample tube. To filter, attach the unit to the 50 mL centrifuge tube containing your sample, flip, and apply vacuum. The filtrate collects directly into the attached 50 mL tube. Three membranes are available:   Millipore® Express® polyethersulfone (PES) membranes are…

STERIVEX™ FILTERS Filter-sterilize volumes up to 2,000 mL using Sterivex™ pressure-driven filter units. With three membrane options and a variety of outlet connections, Sterivex™ filters can fit nearly any workflow and dispense into nearly virtually any storage container.…

…High Flow Foxx Velocity 0.2um PES membrane. Perfect for filtering FBS and other viscous solutions. Our membrane is low protein binding and surfactant-free. Autofil SS is available in 250ml, 500ml, and 1000ml complete units or funnel only bottle-top filters. All units are sterile and manufactured…

Foxx Life Sciences' Autofil® PP bottle-top filters for solvent filtration are a revolutionary new way to purify solvents for analytical applications to obtain sterilized or purified extracts. Foxx has developed the world's first single piece polypropylene funnel, designed to withstand…

…of pre-filter disks (not included) for hard to filter solutions. The receiver bottle is made from clear durable polystyrene and the entire unit is sterilized by gamma irradiation. Stem cell tested Express® PLUS PES membrane filters, safeguard the viability of growth media. …

…to shipment. Capsule filters are available in sterile and non-sterile versions. The capsules are available with the following connections: 3/8 inch hose barb, 1/4 to 1/2 inch stepped hose barb, 1/4 inch NPTM, 1/2 inch NPTM, and 1.5 inch sanitary flange. All units are packaged in low particulate…

…to shipment. Capsule filters are available in sterile and non-sterile versions. The capsules are available with the following connections: 3/8 inch hose barb, 1/4 to 1/2 inch stepped hose barb, 1/4 inch NPTM, 1/2 inch NPTM, and 1.5 inch sanitary flange. All units are packaged in low particulate…

…unthreading filter and inserting the plug cap. Available in various capacities from 150 mL to 1 L, with choice of membrane filter material: Cellulose Acetate (CA) with 0.22 or 0.45 µm pore size; Cellulose Nitrate (CN) or Nylon (NY) with 0.2 µm pore size; and Polyethersulfone (PES) with…