Peek Tubing

Compare Tool

Select up to 3 products

Peek Tubing
1 - 32 of 38
Sort
View
Show
  • Inert PEEK Tubing

    Restek

    Replaces stainless steel, titanium, PTFE, or Tefzel tubing Less oxygen permeable and more temperature resistant (to 100 °C) than PTFE or Tefzel tubing Use with PEEK finger-tight or flangeless fittings Use tubing ≤ 0.007" to 7,000 psi; tubing ≥ 0.010" ID to 5,000 psi

  • Upchurch PEEK Fingertight Fitting, fitting 10-32 (one-piece)

    MilliporeSigma

    …port and can be easliy found if dropped onto the floor. The two-piece fitting features a separate ferrule so you can replace just the ferrule instead of the entire unit. The Upchurch PEEK Fingertight fittings are for use with 1/16″ O.D. tubing and can be used to 6,000 psi (420 kg/cm 2 ).

  • PEEKsil Tubing

    SGE

    …polyether ether ketone (PEEK) that is mechanically strong and has ideal characteristics for sealing with conventional metal or polymer ferrule systems. PEEKsil may be used as a direct replacement for conventional stainless steel as well as a replacement for PEEK tubing used in liquid chromatography…

  • HPLC PEEK Performance Kit

    Restek

    PEEK Performance Kit is a useful complement to your HPLC system. Includes: Hub-Cap Adapter w/ Cap (1) Tubing Clips (3) Clean Cut Tubing Cutter (1) PEEK Finger Tight Fittings (5) PEEK Column Plugs (5) PEEK 90° Tubing Elbows (2) PEEK 180° Tubing Elbows (2) PEEK

  • PEEK Tubing Elbows

    Restek

    Tubing elbows (90° and 180°) are ideal for routing 1/16" PEEK tubing through your system. Simply snap the tubing into the elbow. Prevent pinching of PEEK tubing, which can cause high pressure.

  • PEEK Union Connector

    Restek

    Quickly and reliably connect two pieces of 1/16" tubing. 0.3 mm union bore. End fittings included.

  • Upchurch PEEK Fingertight Fitting nut and ferrule 10-32

    MilliporeSigma

    …port and can be easliy found if dropped onto the floor. The two-piece fitting features a separate ferrule so you can replace just the ferrule instead of the entire unit. The Upchurch PEEK Fingertight fittings are for use with 1/16″ O.D. tubing and can be used to 6,000 psi (420 kg/cm2).

  • PEEKsil™ Injection Loop

    SGE

    …loss due to shear or adsorption Maximum operating pressures are 3000psi for 10µL, and 20µL loops Supplied with PEEKsil™ tubing and two sets of Stainless Steel Hexnuts™ with PEEK ferrule fittings Compatible with most valves including Rheodyne® and Valco®

  • PEEK Tubing

    MilliporeSigma

    (PEEK) tubing has become a popular replacement for stainless steel tubing in various places in the HPLC system. It is especially useful when contact between the sample and metal components must be avoided, such as when working with metal complexing agents or certain biochemical compounds. PEEK

  • Peek Sample Loops

    Agilent Technologies

    …solvents affect the durability of PEEK tubing Concentrated nitric acid and sulfuric acid weaken PEEK tubing THF, methylene chloride and DMSO cause PEEK to swell Actual volumes can differ because of tolerance of tubing bore Accuracy of large PEEK loops is ±14%, intermediate…

  • Clean-Cut Tubing Cutter

    Restek

    Burr-free, perpendicular cuts that will not distort the tubing OD or close the ID Use on PEEK, PTFE, Tefzel, and other polymeric tubing

  • PEEK Tubing

    Agilent Technologies

    Flexible and easy to cut to desired lengths Color-coded for easy tracking Accepts both stainless and PEEK fittings 1/16" OD

  • PEEK tube, 1/16, 0.005id

    Thermo Scientific

  • Universal 10-32 PEEK Column Connectors and Plugs

    Restek

    Universal PEEK connectors allow easy installation of all 1/16" tubing, including stainless steel, up to 5,000 psi.

  • Flexible Stainless Steel Capillaries Without Fittings

    Agilent Technologies

    …Steel-coated PEEK: high-pressure bio-inertness and robustness In bio-chromatography, capillaries and connectors should be inert to ensure the lowest interaction with protein samples. They must also be highly robust to withstand harsh cleaning procedures. Agilent has engineered a bio-inert PEEK

  • Trident LC Column Protection System

    Restek

    … Match your needs with three levels of protection: filter only, cartridge only, or filter and cartridge Durable metal tip with replaceable PEEK ferrule means easy installation onto column without tools Improved thread design and materials create an optimal seal that releases and reseals…

  • Tubing Cutter

    Agilent Technologies

    Tubing cutter, for plastic or PEEK tubing.

  • PEEK Tubing

    Agilent Technologies

  • EXP Hex-Head Fittings

    Restek

    …design combines the durability of titanium with the sealing ability of PEEK Cutting-edge system provides ZDV (zero dead volume) connection to any 10-32 female port Compatible with 1/16" PEEK and stainless steel tubing Restek is pleased to offer the reusable EXP fitting system from…

  • Rigid Capillary Tubing

    Agilent Technologies

    Squarely cut, pre-cleaned and ready to use Use with stainless steel fittings and ferrules or PEEK fittings

  • Replacement Tubing For Autosamplers, Peek And PTFE

    Thermo Scientific Orion

  • PEEK TUBING CUTTER 1EA

    MilliporeSigma

  • PEEK tubing 1/16 x 0.02in

    Thermo Scientific

  • 10FT PEEK TUBING 1/16IN .005IN ID RED

    MilliporeSigma

  • Tube PEEK .03" id

    Agilent Technologies

  • Survival Kit for HPLC, PEEK

    Restek

    …body), 10-pk. PEEK Tubing, 1/16" OD x 0.005" ID x 3 m (red stripe), ea. PEEK Tubing, 1/16" OD x 0.007" ID x 3 m (yellow stripe), ea. PEEK Tubing, 1/16" OD x 0.010" ID x 3 m (blue stripe), ea. PEEK Tubing Elbow, 90°, 5-pk. PEEK Tubing Elbow, 180°,…

  • Opti-Cap GL-45 Bottle Tops

    Restek

    The most economical way to helium-sparge and deliver LC mobile phases. Opti-Cap tops fit all standard GL-45 bottles and have two 1/8" holes and one 1/16" hole for tubing. All three openings are designed for threaded PEEK plugs.

  • ProteCol® Unions

    SGE

    Precision engineered for Capillary LC, ProteCol Unions offer complete versatility for connecting a range of capillary tubing. Manufactured to exacting tolerances and available in PEEK and stainless steel, the zero dead volume design provides faultless butt connections.

  • EasyLOK Fittings

    SGE

    …stainless steel nut and a double ended PEEK™ ferrule. The PEEK™ ferrule simply slides over any 1/16" OD tubing to its required position, while the nut is finger tightened. Unlike stainless steel, the PEEK™ ferrule will not crush the tubing and can be easily readjusted for…

  • HiScale Columns

    GE Healthcare

    …fully compatible with all applications (and packing methods) currently applicable to XK columns. HiScale columns are delivered with a column tube, outer protection tube, two adapters, PEEK tubing, and unions at both ends for easy connection to valves, pumps, and monitors. Packing HiScale columns

  • Accessories for picoSpin™ Series II NMR Spectrometers

    Thermo Scientific UV-Vis

    …blunt tip dispensing needle 1, Drain tube assembly 2, Finger-tight PEEK port plugs 1, Syringe ports 1, PEEK finger-tight body 2 µm stainless steel frit filter Instructions 1170C59: Inline Filter Kit Kit includes five PEEK finger-tight body 2 µm stainless steel…

  • EXP Hand-Tight Coupler

    Restek

    …design combines the durability of titanium with the sealing ability of PEEK Cutting-edge system provides ZDV (zero dead volume) connection to any 10-32 female port Compatible with 1/16" PEEK and stainless steel tubing Restek is pleased to offer the reusable EXP fitting system from…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.