Pasteur Pipets

… PYREX® Pasteur Pipets are made from heat-resistant borosilicate Code 7800 glass Corning Pasteur Pipets are mode from economical soda-lime glass One-time use eliminates the danger of cross-contamination of valuable specimens or laboratory reagents Pipets have constriction one…

…Ungraduated with square-cut ends Tip length of all 5 3/4" pipets is approximately 50 mm. Tip length of all 9" pipets is approximately 120 mm. Constriction approximately 25 mm from mouth end. Controlled Drop pipets deliver at a rate of 22-26 drops per mL. Intended for use with blood…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

…Body of pipet is approximately 7 to 7.5 mm outside diameter with small constriction approximately 30 mm from the upper end to retain a cotton plug. Tip length of all 5 3/4" pipets is approximately 50 mm. Tip length of all 9" pipets is appoximately 120 mm. Easel-Pak pipets are packaged…

…100 pipets Also available packaged sterile (gamma irradiated) individually wrapped with 50 pipets per bag or bulk packed with 25 pipets per bag, so no autoclaving is necessary before use Polystyrene Plasteur® Plastic Pasteur Pipets offer the aspirating precision of a glass pipet and…

… Polypropylene Plasteur Pipet will not shatter, eliminating losses due to broken glass fragments in your work Can be autoclaved Value Saves time and money - Use all the pipets in the box, as compared to traditional glass Pasteur pipets which are often damaged during…

…access without “dropping” other pipettes Has capacity of up to four sterilization cans Durable epoxy-coated surface Autoclavable Pasteur Pipettes, used in high volume for inoculating media, transferring samples and blood bank applications are now at your fingertips, securely stored…

Pasteur, Controlled Drop Capacity approximately 5 mL Bulb draw approximately 2 mL Delivers approximately 25 drops per mL (for blood bank use). Length 5 3/4 inches (146 mm); stem diameter 7 mm. Offered in non-sterile or sterile (sterilized by gamma radiation)

Bellco manufactures all precision pipettes from Type 1 Class A Borosilicate Glass. All Bellco pipettes feature tempered tips and permanent silk screened graduations to withstand repeated usage and alkali washings. Specifications: Straight Tip With 1.5 To 2mm Orifice Borosilicate Glass Type…

Glass ungraduated Approximately 4 mL capacity Pasteur-type pipets for one time use in the transfer of small volumes. These pipets do not feature a constriction. Useful in automatic clinical analyzer techniques. Packaged in dispenser boxes containing 100 pipets and one 4 mL rubber bulb.

Bellco manufactures all precision pipettes from Type 1 Class A Borosilicate Glass. All Bellco pipettes feature tempered tips and permanent silk screened graduations to withstand repeated usage and alkali washings. Specifications:  Type 1 Class B Borosilcate Glass Bent Tip With 1.5 - 2mm…

Bellco manufactures all precision pipettes from Type 1 Class A Borosilicate Glass. All Bellco pipettes feature tempered tips and permanent silk screened graduations to withstand repeated usage and alkali washings. Specifications: Type 1 Class B Borosilicate Glass Straight Tip With 1.5 - 2…

Bellco manufactures all precision pipettes from Type 1 Class A Borosilicate Glass. All Bellco pipettes feature tempered tips and permanent silk screened graduations to withstand repeated usage and alkali washings. Specifications: Type 1 Class B Borosilcate Glass Bent Tip With 1.5 - 2mm…

For transfer of all infectious materials culture media, and routine sampling. Bellco manufactures all precision pipettes from Type 1 Class A Borosilicate Glass. All Bellco pipettes feature tempered tips and permanent silk screened graduations to withstand repeated usage and alkali washings. …

For transfer of all infectious materials culture media, and routine sampling. Bellco manufactures all precision pipettes from Type 1 Class A Borosilicate Glass. All Bellco pipettes feature tempered tips and permanent silk screened graduations to withstand repeated usage and alkali washings. …

For transfer of all infectious materials culture media, and routine sampling. Bellco manufactures all precision pipettes from Type 1 Class A Borosilicate Glass. All Bellco pipettes feature tempered tips and permanent silk screened graduations to withstand repeated usage and alkali washings. …

For transfer of all infectious materials culture media, and routine sampling. Bellco manufactures all precision pipettes from Type 1 Class A Borosilicate Glass. All Bellco pipettes feature tempered tips and permanent silk screened graduations to withstand repeated usage and alkali washings. …

Sterile or non-sterile Low-affinity surface Attached bulb avoids cross-contamination One-step biohazard disposal Shatterproof, low-density polyethylene which is non-toxic and inert Can be frozen in liquid nitrogen

Sterile, polystyrene, non-plugged, non-graduated pipets Safer alternative to glass Pasteur pipets can be used for all vacuum-aspirating procedures Noncytotoxic, nonpyrogenic tested to less than 0.1 EU/mL Individually packaged in thermoformed paper-plastic wrap to ensure sterile presentation

Sterile or non-sterile Low-affinity surface Attached bulb avoids cross-contamination One-step biohazard disposal Shatterproof, low-density polyethylene which is non-toxic and inert Can be frozen in liquid nitrogen

…low-density polyethylene (LDPE), these unbreakable one-piece pipets are used to draw and dispense liquids in controlled, reproducible drop sizes. Plastic transfer pipets are the perfect substitute for breakable glass Pasteur pipets, which can be a danger to laboratory personnel. And, because…

One-piece transfer pipets eliminate the preparation and risks of using glass Pasteur pipets. The polyethylene material is shatter-proof, inert, and has a low-affinity surface to minimize sample loss due to binding. Sterile versions are individually packed

Capacity approximately 5 mL; bulb draw 3.5 mL (7.5 and 3.2 mL for 1233L20) Narrow taper with fine tip Delivers approximately 25 drops per mL 153 mm length, 5 mm stem diameter (8 mm stem diameter for 1233L20) Offered in non-sterile or sterile (sterilized by gamma radiation)

The rubber droppers are designed for use with Pasteur pipets, small pipets, and medicine droppers.

Polyethylene pipettes will not shatter or break An excellent alternative to Pasteur pipettes and rubber bulbs Evenly distributed thickness ensures uniform suction force Gamma radiation sterilized option available Available wrapped individually (sterile) or in bulk package (non-sterile)

Argos plastic pasteur pipets are produced from medical grade polystyrene in a class 100,000 cleanroom. Plastic Pasteur pipets offer the same aspirating precision of glass, and the safety and benefits of plastic. Plastic construction allows the long flexible stem to be bent to draw liquid from narrow…

Ideally suited for the rapid transfer of liquids Length: 153 mm Working volume: 0.1mL

Bulk packaging and non-sterile Material: medical grade transparent LDPE Excellent transparency with clear graduations for easy observation Good fluidity for easy control High precision and drop repeatability

Capacity approximately 8 mL; bulb draw 4.6 mL Delivers approximately 22 drops per mL 150 mm length, 6.25 mm stem diameter Bulk packaged

Low-affinity surface Attached bulb avoids cross-contamination One-step biohazard disposal Shatterproof, low-density polyethylene which is non-toxic and inert Can be frozen in liquid nitrogen

Low-affinity surface Attached bulb avoids cross-contamination One-step biohazard disposal Shatterproof, low-density polyethylene which is non-toxic and inert Can be frozen in liquid nitrogen

Capacity approximately 1.5 mL; bulb draw approximately 1 mL Fine, drawn-out tip Delivers approximately 50 drops per mL 104 mm length, 3 mm stem diameter Bulk packaged