Paraformaldehyde Solution

Compare Tool

Select up to 3 products

Paraformaldehyde Solution
1 - 29 of 29
Sort
View
Show
  • Paraformaldehyde Solution

    MP Biomedicals

    Methanol free Paraformaldehyde is ready to use solution used as a fixative for electron microscopy. Recommended for use in the preparation of formalin fixatives for tissues or cells when the samples are to be used in fluorescence studies.

  • Paraformaldehyde fixative solution

    Alfa Aesar

    Harmonized Tariff Code:  3822.00 Hazard Statements: H351-H317 Suspected of causing cancer. May cause an allergic skin reaction. Precautionary Statements: P261-P280-P281-P363-P405-P501a Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye…

  • Paraformaldehyde solution, 16% w/v in water, methanol free, ampuled under argon

    BeanTown Chemical

    CAS: 30525-89-4 MDL No: MFCD00133991 Liquid Linear Formula: (CH2O)n MW: 30.03 (monomer)

  • Paraformaldehyde - Glutaraldehyde Solution (Karnovsky's Fixative)

    Electron Microscopy Sciences

    …Formaldehyde especially used for vascular profusion. 16% Paraformaldehyde Solution: 13ml 50% Glutaraldehyde EM Grade: 5ml 0.2M Sodium Phosphate Buffer: 50ml Distilled Water: 32ml Final mixture is 2% Paraformaldehyde, 2.5% Glutaraldehyde and 0.1M Buffer. If necessary, the…

  • Paraformaldehyde (Formaldehyde)

    Electron Microscopy Sciences

    …dangerous solution of formaldehyde is to under 10%, we are now offering an 8% and a 4% solution. This will allow us to ship overnight as well as overseas without any hazardous charges saving our customers a good deal of money. The quality of our 8% and 4% aqueous Paraformaldehyde solution is as…

  • Phosphate-Buffered 4% Paraformaldehyde

    FD NeuroTechnologies

    …filtered and ready-to-use tissue fixative is freshly made from high purity paraformaldehyde powder. This solution may be stored at room temperature for at least one year without change of the original quality. The standard solution contains 4% paraformaldehyde in 0.1 M phosphate buffer (pH 7.4).

  • Paraformaldehyde For Synthesis

    MilliporeSigma

    CAS No.: 30525-89-4 pH: 5.5 (H2O, 20°C) (saturated solution) Solubility: (20°C) slightly soluble Melting Point: 100 - 130°C Vapor Pressure: 1.93 hPa (25°C) Flash Point: 70°C Explosion Limit: 7 - 73 %(V) Density: 1.4 g/cm3 (20°C) Ignition Point: 300°C

  • Phosphate-Buffered 4% Paraformaldehyde with Picric Acid

    FD NeuroTechnologies

    …freshly made with high purity paraformaldehyde powder and saturated picric acid solution according to Zamboni and de Martino. This fixative has been proven to preserve generally better morphology and antigenicity compared to the phosphate-buffered 4% paraformaldehyde. This fixative may be stored at…

  • Paraformaldehyde, Prepared Fixatives

    Electron Microscopy Sciences

    In addition to our complete line of Formaldehyde solutions we have now added to the line.

  • Paraformaldehyde, 16% w/v aq. soln., methanol free

    Alfa Aesar

    …locked up. Dispose of contents/container in accordance with local/regional/national/international regulations. Other References Merck: 4,7025 Harmonized Tariff Code: 2912.60 TSCA: Yes Notes Solution is micro-filtered and supplied in ampules. RNase and DNase free.

  • EmbryoFix™

    FD NeuroTechnologies

    EmbryoFix™ is a ready-to-use fixative especially suitable for the fixation of embryonic tissues. This solution, consisting of phosphate-buffered paraformaldehyde and picric acid, is prepared mainly according to Zamboni and de Martino. The fixative is packaged in polyethylene vials of…

  • Glutaraldehyde solution, 50 wt. % in H2O

    MilliporeSigma

    …Antibacterial action of 2% solution of alkaline glutaraldehyde against various atypical mycobacteria has been investigated. Application: Glutaraldehyde may be used in the following studies:. To compose the fixative solution (Glutaraldehyde + Paraformaldehyde + NaPO4) for use in…

  • Anti-DBP5 (N-terminal) antibody produced in rabbit, ~1 mg/mL, affinity isolated…

    MilliporeSigma

    …a working concentration of 1-2mug/mL using HEK-293T cell lysate and immunofluorescence at a working concentration of 2.5-5mug/mL using paraformaldehyde fixed HEK-293T cells over-expressing human DBP5. Biochem/physiol Actions: DBP5 is required for mRNA export from the nucleus in an ATP-dependent…

  • Anti-ATG7 antibody produced in rabbit, affinity isolated antibody, buffered…

    MilliporeSigma

    …human, mouse and rat. Application: Rabbit anti-ATG7 antibody was used for immunohistochemistry on sections of mouse midbrain fixed in 4% paraformaldehyde at 1:2000. Application: Rabbit anti-ATG7 antibody has been used for immunoblotting assays. The antibody is also suitable for use in…

  • Anti-DBP5 (C-terminal) antibody produced in rabbit, ~1.0 mg/mL, affinity…

    MilliporeSigma

    …a working concentration of 0.5-1mug/mL using HEK-293T cell lysate and immunofluorescence at a working concentration of 2.5-5mug/mL using paraformaldehyde fixed HEK-293T cells over-expressing human DBP5. Biochem/physiol Actions: DBP5 is required for mRNA export from the nucleus in an ATP-dependent…

  • Anti-eIF2Bepsilon antibody produced in rabbit, IgG fraction of antiserum,…

    MilliporeSigma

    …Application: Anti-eIF2Bepsilon antibody produced in rabbit is suitable for indirect immunofluorescence (at a dilution of 1:500-1:1,000 using paraformaldehyde fixed NIH-3T3 cells) and western blotting at a dilution of 1:500-1:1,000 using Rat1 or HEK-293T cell lysates.Yale Center for High Throughput…

  • Anti-eIF2Bbeta (N-terminal) antibody produced in rabbit, ~1.0 mg/mL, affinity…

    MilliporeSigma

    … Immunogen: synthetic peptide corresponding to amino acids 7-24 of human eIF2Bbeta, conjugated to KLH. The corresponding sequence is identical in rat and differs by one amino acid in mouse. Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.4, containing 15 mM sodium azide.

  • Anti-DCP1A (N-terminal) antibody produced in rabbit, ~1.0 mg/mL, affinity…

    MilliporeSigma

    …the cap structure at the 5' mRNA. Immunogen: synthetic peptide corresponding to amino acids 72-87 of human DCP1A, conjugated to KLH. The corresponding sequence is identical in rat and mouse. Physical form: Solution in 0.01 M phosÂphate buffered saline, pH 7.4, containing 15 mM sodium azide.

  • Anti-eIF4E antibody produced in rabbit, ~1 mg/mL, affinity isolated antibody,…

    MilliporeSigma

    … Immunogen: synthetic peptide corresponding to amino acids 21-37 of human eIF4E, conjugated to KLH via a C-terminal added cysteine residue. The sequence is conserved in human, rat, and mouse. Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.4, and 15 mM sodium azide.

  • Anti-FOXA1 antibody produced in rabbit, IgG fraction of antiserum, buffered…

    MilliporeSigma

    …as a potential regulator of progression of human glioma. Immunogen: synthetic peptide corresponding to amino acids 441-459 of human FOXA1, conjugated to KLH via a N-terminal cysteine residue. Physical form: Solution in 0.01 M phosÂphate buffered saline, pH 7.4, containing 15 mM sodium azide.

  • Anti-CPSF2 antibody produced in rabbit, ~1.0 mg/mL, affinity isolated antibody,…

    MilliporeSigma

    …of cytoplasmic polyadenylation complex. Immunogen: synthetic peptide corresponding to amino acids 471-485 of human CPSF2 conjugated to KLH. The corresponding sequence is identical in mouse. Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.4, containing 15 mM sodium azide.

  • Anti-FANCD2 antibody produced in rabbit, IgG fraction of antiserum, buffered…

    MilliporeSigma

    … synthetic peptide corresponding to amino acids 1-18 of human FANCD2, conjugated to KLH via a C-terminal added cysteine residue. The immunizing peptide is present in isoforms a and b of FANCD2. Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.4, containing 15 mM sodium azide.

  • Anti-DCP2 (N-terminal) antibody produced in rabbit, ~1.0 mg/mL, affinity…

    MilliporeSigma

    …dependent on the DCP1 subunit in vivo. Immunogen: synthetic peptide corresponding to amino acids 19-36 of human DCP2, conjugated to KLH. The corresponding sequence is identical in rat and mouse. Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.4, containing 15 mM sodium azide.

  • Anti-eiF4EBP2 antibody produced in rabbit, ~1.0 mg/mL, affinity isolated…

    MilliporeSigma

    …human eIF4EBP2 conjugated to KLH via a cysteine residue. The corresponding sequence differs by one amino acid in mouse and rat. Physical form: Solution in 0.01 M phosÂphate buffered saline, pH 7.4, containing 15 mM sodium azide. Target description: eiF4EBP2 encodes a member of the eukaryotic…

  • Anti-DCP1A (C-terminal) antibody produced in rabbit, ~1.0 mg/mL, affinity…

    MilliporeSigma

    …at the 5' mRNA. Immunogen: synthetic peptide corresponding to amino acids 512-528 of human DCP1A, conjugated to KLH. The corresponding sequence differs by two amino acids in rat and mouse. Physical form: Solution in 0.01 M phosÂphate buffered saline, pH 7.4, containing 15 mM sodium azide.

  • Anti-DCP2 (C-terminal) antibody produced in rabbit, ~1 mg/mL, affinity isolated…

    MilliporeSigma

    …corresponding to amino acids 406-420 of human DCP2, conjugated to KLH. The corresponding sequence is identical in rat and mouse. Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.4, containing 15 mM sodium azide. Target description: DCP2 (C-terminal) is a key component of an…

  • Saponin from Plant

    MP Biomedicals

    … 1% of saponin solution can hemolyze erythrocytes. Saponin solutions have been used in the following ways: concentrations of 0.005%-0.01% were used to permeabilize cultured human intestinal epithelial cells after incubation for 30' prior to immunofluorescence; a 0.05% solution of saponin was…

  • Anti-Glial Fibrillary Acidic Protein antibody, Mouse monoclonal, clone G-A-5,…

    MilliporeSigma

    …assembly has been implicated in mitotic remodeling of glial structures. Genetic mutations in GFAP have been associated with Alexander disease. Immunogen: purified GFAP from pig spinal cord. Physical form: Solution in 0.01 M phosphate buffered saline, pH 7.4, containing 15 mM sodium azide.

  • Perfusion Wash and Fixative Ready to Use

    Electron Microscopy Sciences

    …use Perfusion washes and fixatives which are recommended by the NeuroScience Association. All of our solutions are ready made and are of the highest quality. We have three groups of solutions commercially available. Group I: Perfusion wash and Fixative Technical Grade. To be used…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.