Overhead Stirrer Stand

Compare Tool

Select up to 3 products

Overhead Stirrer Stand
1 - 32 of 40
Sort
View
Show
  • stand with H-shape base which prevents the stand from tipping backwards. Additionally equipped with a pneumatic spring stand rod, which enables heavy instruments / attachments to be raised and lowered smoothly without difficulty, e.g. with rheological measurements using overhead stirrers. The stand

  • …style stainless steel support stand made to accept 12 and 22 Liter CG-1539 half jacketed flasks. Stand is 67in overall height with a depth of 22in. Ring has a diameter of 8 1/2in I.D. and is 28in above floor level. Top of stand has a 39in reinforced riser to support overhead stirrers, clamps etc.

  • Stirrer Accessories

    Arrow Engineering

    Support Stand Steel base; legs have rubber pads to cut vibration Support rod is made of stainless steel. Height is 29”; available in two models. Jacob's Chuck, Adjustable Fits 3/8 ” (10 mm) diameter motor shafts Keyless Chuck, Nylon-bodied …

  • …Model 152A propellers. Both models have a continuous duty rating. Mixers include collet chuck and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. Support stands and holders sold separately. Direct drives Brushless motors Fan cooled

  • Stands Extra strong retort stands with H-pattern base for stability and robust support rod. Both versions include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer.   Paddle Rods Made from high grade stainless steel, there is a choice of five…

  • … This durable stand provides excellent stability for bench stop stirrers even when agitating viscous materials. The wide base and H configuration allow for a wide range of vessel sizes, while the 710 mm (28″) stand rod enables strong engagement with stand clamp. Portable and…

  • …wall thickness) Support stand has an electropolished cast steel base and 303 stainless steel support rod measuring 29"H x 5/8" dia (737 mm H x 16 mm dia). Both legs of base accept an optional screw-in support rod. Optional screw-in support rod for 04552-80 stand Pivot-mount controller…

  • …legs accommodate rods, enabling the stand to support two mixers. The “U” shape of the base should be turned from the mixing apparatus when the two outside rods are in use. This balances the weight, preventing the base from tipping. Support Stand Stabilizer Knobs (mfg. no. 30400044)…

  • …motor. A unique two speed transmission provides incredible amounts of power. Caframo stirrers are quiet, dependable, maintenance free and ideal for continuous use. Included in each purchase: Overhead stirrer motor, chuck, chuck guard, chuck key, support rod, power cord, manual in four languages…

  • …control options. Mixers include collet chuck and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. Support stands and holders sold separately. Model 103 Table mounted Basic Speed Control The speed control is remotely attached by a…

  • …stainless steel Teflon® TFE bushing 11,500 rpm 120V or 240V models available Includes lab clamp The upward flow stirrer may be used effectively with pharmaceuticals, cosmetics, paints, inks, foods and petroleum. Unique blending action occurs entirely below the solution's…

  • … A unique two speed transmission provides incredible amounts of power. Caframo stirrers are quiet, dependable, maintenance free and ideal for continuous use. Included in each purchase: Overhead stirrer motor, chuck, chuck guard, chuck key, support rod, power cord, manual in four languages…

  • …productivity. With the push of a button, the unique Stirlight™ lights up so that solutions can be seen clearly. Included in each purchase: Overhead stirrer motor, chuck, chuck key, support rod, external power supply, grounded power cord, manual in four languages (English, French, Spanish and…

  • ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…

  • …you need! These convenient, ready-made systems come complete with a mixer head, speed controller, shaft, propeller, clamp, and stand. Note: High-torque models include keyless chuck. Low-torque models include collet. Mixer Heads Heads feature a TENV, permanent-magnet…

  • …you need assembled into a complete stirring package. Included in each purchase: overhead stirrer motor, integral clamp, stainless steel collet, external power supply, grounded power cord, stand, axial and radial mixing blades, mixing shaft, manual in four languages (English, French,…

  • …mounting rod with carriage bolt and wrench for mounting motor to support stands. The model 409 (429) mixer includes adjustable chuck and 8" (20.3cm) mounting rod for mounting motor to support stands. Support stands and holders sold separately. Powerful permanent magnet gear motors Maintains…

  • …-150 volts, variable, filtered approximately 1/2 hp.max. 3 amps. A solid state control with rugged control regulation and rectification circuitry. AC and DC work in conjunction. Fwd-Off-Rev. DC control switch only. Fused for AC and DC outputs, 10 amps and 3 amps respectively. Rear ring stand clamp.

  • stand is designed to fit into most benchtop hoods. ChemRxnHub Triple Stand can hold three reactors from 300mL to 5L. The stand provides support for the Reaction Vessel(s), Glassware, Overhead Stirring Motor, and Temperature Monitor. Stand includes removable spill tray. The weight of the stand is…

  • Overhead Stirrers with a MAX Support Arm of 5/8” Diameter.  Unique Design Allows Easy Installation/Removal of Glassware.  Frame has Adjustable Leveling Pads.  Compact Foot-Print: 15.25” W x 17.25” D x 44” H This unique stationary reactor stand

  • …motor. A unique two speed transmission provides incredible amounts of power. Caframo stirrers are quiet, dependable, maintenance free and ideal for continuous use. Included in each purchase: Overhead stirrer motor, chuck, chuck guard, chuck key, support rod, power cord, manual in four languages…

  • …shaft handles high viscosity mixing. Mixers include collet chuck and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. Support stands and holders sold separately. Durable and rugged multi-purpose mixers Wide range of speeds Moderate torque

  • …benchtop overhead stirrer is used in chemical reactions and synthesis, raw material QC, food sample prep, polymer and personal care formulations. With the push of a button, the unique Stirlight™ lights up so that solutions can be seen clearly. The Reversing Digital Stirrer is powered…

  • …reactor stand is designed to fit into most benchtop hoods. ChemRxnHub Dual Stand can hold two reactors from 300mL to 5L. The stand provides support for the Reaction Vessel(s), Glassware, Overhead Stirring Motor, and Temperature Monitor. Stand includes removable spill tray. The weight of the stand is…

  • Heidolph RZR 1 overhead stirrer with tools and accessories features 2 gears delivering 280 to 2200rpm with analog control. 115v 60Hz input motor is high torque, up to 100Ncm. Use code -32 stir shaft for slow speed, up to 250rpm and code -34 shaft for speeds up to 2200rpm. Universal stand and clamp…

  • ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…

  • ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…

  • ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…

  • ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…

  • …supplied with 1.5 meter 3-wire cable for controller connection. Motor is UL & CE rated. Controller: solid state 120v, 10 amp AC max. or 0-120v, 6 amp DC max. Features rear ring stand clamp, Fwd-Off-Rev. switch. Supplied with 1amp fuse and heavy duty 1.8 meter 3-wire power cord with NEMA plug.

  • Rated 1 hp. for use with most stirrer motors. Not for use with shunt wound DC motors. A compact, lightweight, solid state, ring stand mountable control unit, both AC and DC outlets. Pulsed AC gives better low speed torque than voltage dropping devices such as rheostat or transformer. AC output: 120…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.