Overhead Stirrer Accessories

Compare Tool

Select up to 3 products

Overhead Stirrer Accessories
1 - 29 of 29
Sort
View
Show
  • Blades Stainless steel with 400 mm shafts

  • Thomas No. 1203B76 Stirrer diameter: 55 mm Thomas No. 1203B77 Stirrer diameter: 45 mm Thomas No. 1203B78 Stirrer diameter: 42 mm Thomas No. 1183U39 Stirrer diameter: 50 mm

  • …with H-pattern base for stability and robust support rod. Both versions include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer.   Paddle Rods Made from high grade stainless steel, there is a choice of five paddle heads and two lengths of 8mm diameter…

  • …digital overhead stirrer models for the safe and effective mixing of large volumes of liquids. LCD and LED Digital overhead stirrer models offer considerable functionality that would not be available on a standard analog overhead stirrer. For example, the Scilogex LCD digital lab stirrers allow…

  • …for removal from stirrer’s output shaft for cleaning or replacement. Thomas No. 1177M33 Chuck compatible for High Torque and Compact Caframo stirrers, accepting impeller shafts up to 10 mm (3/8”) diameter. Chuck key includes tool for removal from stirrer’s output shaft for…

  • Accessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blade stirrer Gentle processing samples, used at low and medium speeds Polytetrafluoroethylene (PTFE) coating has low coefficient of friction against a solid

  • Accessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blades open with increasing speed for stirring in a round vessel with a narrow neck, used at medium and high speeds Polytetrafluoroethylene (PTFE) coating

  • Stirrer Accessories

    Thermo Scientific Nalgene

    Impellers made of stainless steel (8592H39 through H48) or glass-filled propylene (8592H36) Autoclavable 8592H36 Lower Assembly/Shaft and Impeller; shaft length x diameter: 13-1/2" x 3/8"; impeller diameter: 4". 8592H39 Lower Assembly is for use with the Nalgene 30-gallon,…

  • Stirrer Accessories

    Arrow Engineering

    …(10 mm) diameter motor shafts Keyless Chuck, Nylon-bodied Fits 3/8” (10 mm) diameter motor shafts Adjusts to accept stirrers from 1.5 mm to 10 mm o.d. Couplings Flexible coupling with PTFE sleeve for use with glass stirring shaft The 4"…

  • …Each mixer maintains constant speed even when the viscosity changes. Mixers are fitted with an adjustable Jacobs style chuck that accepts any accessory shaft . Mixers include adjustable chuck and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. …

  • Benchmark’s Overhead Stirrers

    Benchmark Scientific

    …the Benchmark Overhead Stirrers. Paddle w/flat holes, stainless steel The stainless steel flat paddle with holes is used for applications requiring mild stirring.  For use at medium and low speeds, the paddle is 68mm wide.  Fits the Benchmark Overhead Stirrers.  …

  • Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.

  • Thomas No. 1177M31 Sturdy stand in a smaller bench footprint, for Caframo compact stirrer models BDC2002 and BDC2010. The unique offset design accommodates Caframo clamp so stirrer locates impeller in centre of vessel. The cast zinc-aluminum alloy base is coated for protection from corrosion and…

  • Stirrer Shafts, with 4-Blade Propeller Shaft diameter 6.4 mm, with stainless steel, 4-blade propeller on one end Listings show shaft length x propeller diameter Stirrer Shaft, with 3-Blade Propeller 8 mm-diameter shaft has stainless steel propeller and includes coupling Shaft length 222…

  • Stirrer Coupling

    Chemglass

    The design of our Flex-Drive stirrer coupling eliminates the need to use rubber hose or universal adapters to attach your glass stirrer shafts to overhead motors. Coupling incorporates a 3in long epoxy coated spring to compensate for misalignment and to help isolate breakage. Lower end of coupling…

  • …not scratch or harm glass vessels Usable with most overhead stirrers. Virtually unbreakable Operate at medium to high vacuum Fit standard ground glass joints May be used with all types of standard shaft stirrers in PTFE, glass or stainless steel with 6 or 9.5 mm diameter…

  • Tank clamp lets you mount a mixer head and a controller support (either model 04552-70 or 04552-75) directly onto an open top drum or container (maximum 1-1/2" [38 mm] wall thickness) Support stand has an electropolished cast steel base and 303 stainless steel support rod measuring 29"H x 5/8"…

  • …backwards. Provides optimum stability required for larger, heavier instruments and attachments, for example with rheological measurements using overhead stirrers. The stand has an adjustment screw which can be used to compensate for an uneven laboratory table surface. Diameter of support rod: 34…

  • The unique design of our Tru-Stir™ stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical stainless steel spring permitting up to 1/4” of offset misalignment and…

  • Heidolph RZR 1 overhead stirrer with tools and accessories features 2 gears delivering 280 to 2200rpm with analog control. 115v 60Hz input motor is high torque, up to 100Ncm. Use code -32 stir shaft for slow speed, up to 250rpm and code -34 shaft for speeds up to 2200rpm. Universal stand and clamp…

  • The VELP Telescopic H-Stand allows even heavy accessories to be lifted and lowered effortlessly. The stand has an adjustment handle to move the stirrer. The Telecopic H-Stand is compatible with all VELP Overhead Stirrers.

  • The VELP Telescopic H-Stand allows even heavy accessories to be lifted and lowered effortlessly. The stand has an adjustment handle to move the stirrer. The Telecopic H-Stand is compatible with all VELP Overhead Stirrers.

  • …rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® Reusable Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350 rpm. The weight of the motor is 9 lbs (4.1kg). 402614: Direct Overhead Drive…

  • Clamping Systems

    Arrow Engineering

    …applications Will hold any stirrer with mounting rod from 3/8” to 5/8” diameter (9.5 to 16 mm). Swivel Clamp (8583L44) Ability to set the stirrer to any compound angle for best stirring action One knob enables lowering or raising of the stirrer, one knob locks stirrer on support rod and one…

  • Adjustable Chuck

    Troemner

    Should be ordered based on the diameter of the motor shaft you are using. Each adjustable Jacobs style chuck can accomodate accessory shafts from 1/16" to 3/8" diameter. These products include a chuck key.

  • Collet Chuck

    Troemner

    Stainless steel precision collet type chuck is used when the motor shaft and accessory shaft are the same diameter. It is true running and is the preferred choice when running at high speeds.

  • Propeller Shafts

    Troemner

    All stainless steel 303/304 are constructed with 15° pitched blades which creates an axial flow. Various shaft lengths and diameters with permanent 2" or 3.5" 3-blade propeller for every mixing need available. PTFE coating available.

  • …is Supplied with a Set of Heavy Duty Clamps.  Top Support Bracket is Vertically Adjustable and Provides for Attachment of an Overhead Stirrer. Mounting Clamps Accept a MAX Support Arm Of 5/8” Diameter.   Unique Design Allows Easy Installation/Removal of Glassware. …

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.