Oil Centrifuge

… Oil Centrifuge Tube (2623Q33) In accordance with ASTM D 96 Capacity 125 mL Graduations: from 5 to 10 in 1 from 10 to 25 in 5 at 50 and 100 per ASTM Standard D 96 Fits Thomas number 2525C07 Carrier and 2525C05 Rotor in IEC Centrifuges.

Calibrated "to contain" (TC), this Goetz-type borosilicate glass bulb oil centrifuge tube is a pear shaped tube, similar to LG-4420, but it has a lower stem calibrated to hold 1.5mL. Specified in ASTM Method D 96 as suitable for a number of tests on petroleum products. Reference No.…

Graduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…

Pear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations:  from 0 to 1/2 in 0.05  from 1/2 to 2 in 1/10  from 2 to 3 in 1/5  from 3 to 5 in 1/2  from 5 to 10 in 1  from 10 to…

Can be used in the determination of residues in liquified petroleum (LP) gases, ASTM Method D 2158 Calibrated "to contain" Capacity 100 mL Graduations: 0 to 1 in 0.05 mL Dimensions: 37 mm o.d. x 203 mm L.

Calibrated "to contain" (TC), this borosilicate glass long oil centrifuge tube is used for determinations of water and sediment in petroleum and its products, including fuel oils and lubricating oils. See ASTM Methods D 96, D 1796 and D 91 and also API Code 2500. Reference No. ASTM D…

These 100mL PYREX® conical centrifuge tubes have white graduations and are used in accordance with standard methods of testing for water and sediment in petroleum products. These tubes are graduated upward to 0.5mL in divisions of 0.05mL; from 0.5mL to 2mL in divisions of 0.1mL; from 2mL to 3mL…

KIMAX tube designed for field use in testing petroleum. Calibrated to contain. Scale and legend are durable white ceramic enamel. Top is tooled to accept a Snap Cap (28150R-6) Graduated in %. 100 mL equals 200%

…water and sediment in crude mineral oils, fuel oils and other petroleum products D1796 and MPMS 10.4 standards); in determination of volume of precipitate formed by centrifuging definite quantities of steam cylinder stocks and black oils and other lubricating oils (ASTM D91 and D128); in tests for…

KIMAX® conical bottom centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796. Tube has a permanent red stripe under the white enamel graduations for easy reading of results Scale and legend are durable white ceramic enamel Top is tooled to…

These 100mL PYREX® pear-shaped centrifuge tubes are used for determination of water and sediment in petroleum products. They are fabricated from mold-blown blanks to insure uniform shape and greater mechanical strength. The scale and figures are durable white enamel which stand out clearly against…

… 230V only The OLEUM Oil-Testing Centrifuge is our stand alone oil testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000rpm, or 2,213 xg to determine the water content of your oil sample. The OLEUM is equipped with a…

…of basic sediment and water in crude oil Speeds up to 2000 RPM 16: 1 gear ratio Portable and lightweight Rugged Wide sweep cast aluminum crank has a spring clutch which assures effortless and safe start up and stopping. Supplied with centrifuge head that holds 2 x 15 ml tubes, two aluminum…

This long form 100mL capacity oil centrifuge tube has a capillary tip that makes it ideal for use when only small amounts of solids are present. Made of borosilicate glass, its approximate widest O.D. is 38mm and approximate length is 200mm. Reference No. ASTM D 2709

…Above 20mL and can be used with our Portable Centrifuge; Oil Test Centrifuge with Short Cone Rotor in conformance with D96 Thomas No. 1209Q00 - Centrifuge Tube Tube is 6" Marked in mLs and can be used with Portable Centrifuge; Oil Test Centrifuge with Short Cone Rotor in conformance with…

Designed for use in ASTM D-2273 and ASTM D-2709, this borosilicate glass capillary tipped long form centrifuge tube is 200mm in length.

…tube rotor assembly, 115 and 220 Volt fully automated bench top centrifuge with integrated heating system which accommodates a capacity of 4 tubes Short tube rotor assembly, 115 and 220 Volt fully automated bench top centrifuge with integrated heating system which accommodates a capacity of 4…

…quiet, reliable and safe the centrifuge is available in a non-refrigerated version (4600-01) as well as a heated version (4600-51). The Rotofix 46 H heated centrifuge provides a temperature range of 1 °C up to +90 °C, an ideal fit for applications such as crude oil testing. A wide variety of rotors,…

… Please do not include glassware. We will also not accept household hazardous waste such as  pressurized canisters, pesticides, oil based paint or medical sharps, organics, broken glass, bio-medical waste, soiled diapers or expired medication. In addition, we also will not accept…

…Tube is 8" Marked in mL and can be used with our Oil Test Centrifuge with Long Cone Rotor in conformance with D91, D96, D893, D1796, D4007 Thomas No. 1209Q17 Tube is 8" Marked in mL and can be used with our Oil Test Centrifuge with Long Cone Rotor in conformance with D96 …

…and organic solvents. These pumps are oil-free, portable, and chemical-resistant, which means less maintenance and no more frequent and costly oil change, or cross contamination. TUV certified to UL and CSA standards Only PTFE components are exposed to vacuum, ideal for pumping corrosive…

These 10mL PYREX® conical centrifuge tubes are used in connection with the Wasserman test. Also used to measure H2O content and potassium ions in oil muds. API RP 13B standard testing method. They are graduated in 0.1 mL divisions up to 4 mL, and 0.2 mL divisions from 4 to 10 mL …

…neck Centrifuge from 718 to 934 rpm They are ideal for measuring the upper phase in separation determinations. Gasoline bottles (7133M27) are 165 mm high and Stoddard bottles (7133M31) are 200 mm high. Both bottles are 37 mm in diameter to facilitate use with a centrifuge. Gasoline:…

…a bright display and offers three preset programs and three user-defined programs. Oil-free vacuum source eliminates the need to add or change oil. Data integrity and transfer ability to download data from a USB port Safety assurance: SpeedVac Systems’ standard glass lids are equipped…

…a bright display and offers three preset programs and three user-defined programs. Oil-free vacuum source eliminates the need to add or change oil. Data integrity and transfer ability to download data from a USB port Safety assurance: SpeedVac Systems’ standard glass lids are equipped…

…vapors that pass through the pump, and quiets the pump even more. Excellent for many smaller applications, such as rotary evaporation and centrifugal concentration of higher boiling point solvents, gel drying and more. Ultimate Vacuum: 1.5Torr (2mbar) Free Air Capacity: 25lpm (0.88cfm)…

Eliminate cold-trapping, messy oil maintenance, and the threat of oil contamination to your sample. Handle even high chemical vapor loads for simple, efficient deep vacuum. ChemStar Dry excels where no dry vacuum pump has before – the first practical alternative to oil-seal rotary vane pumps. …

VACUUBRAND Diaphragm Vacuum Pumps are sized for use with CentriVap Centrifugal Concentrators, RapidVap Vacuum Evaporation Systems and Vacuum Desiccators and have uses with many other pieces of laboratory equipment that require a vacuum source. The wetted parts of these pumps are PTFE coated for…

Medium ceramic grinding cylinders with angle-cut ends for use with standard 15 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

Large ceramic grinding cylinders with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

Designed for use with all rotary and centrifugal evaporators Pumps are two-stage, oil-sealed and sliding vane with cast aluminum casing. Labconco XPress Laboratory Equipment Thomas number 4366R20 is part of Labconco's XPress Laboratory Equipment Program. These items are in…

…produced from recycled feedstock in second generation - in this case derived solely from waste and residue streams e.g. from vegetable oil production and used cooking oil ISCC PLUS (International Sustainability & Carbon Certification) to enable traceability along the entire supply chain …