O Ring Glass Joints

Compare Tool

Select up to 3 products

O Ring Glass Joints
1 - 32 of 235
  • Adapter, 15mm o-ring joint to standard taper or ball joints with o-ring seals. Fetfe o-rings for both joints are supplied.

  • Flange is formed with a groove in the flat portion of the mating surface to accept an O-Ring. The flange also has a ground surface, permitting assembly with either the CG-148 flat flange or CG-149 lid blank using grease. In the greased application, the O-Ring groove prevents grease from entering the…

  • Joint has an o-ring groove to accept the listed o-ring size. Provides for a grease-free, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

  • Borosilicate glass vacuum/NO-AIR trap. Simliar to 8755 traps but with No. 15 O-Ring side connecting joints. Ideal for vacuum cart and other vacuum or NO-AIR applications. Comes complete with stainless steel ball-joint clamp and Viton O-Ring.

  • Stopcock adapter, top and bottom o-ring joints, Easy Action plug,/p>

  • Borosilicate glass valve adapter with various Hi-Vac valve sizes and (2) No.15 O-Ring joints. Ideal for assembling Schlenk or vacuum lines Comes with (2) size -116 FETFE O-Rings.

  • HVS Standard Taper Inner Joints with Viton® O-Ring

    Wilmad-LabGlass - SP Scienceware

    …and instruments, these Standard Taper high vacuum inner joints are made of borosilicate glass and have a groove above the ground zone for a Viton® O-ring. This forms a vacuum-tight seal when used with a mating outer joint. No lubricants are required. Just twist to assemble or disassemble.…

  • Adapter, 15mm o-ring joint to tubing. Sized for compression fittings. FETFE o-ring included.

  • Adapter, o-ring joint to size E hose connection, fits 3/8"-7/16" id tubing, fetfe o-ring included

  • Joints - Rodaviss

    Ace Glass

    Glass joint, inner ground with ring on shank for use with threaded outer member or outer member with external thread for use with inner member.O-Ring and cap to form a leak tight-seal. For cap, see 7616; for O-Ring, see 7617.

  • HVS Standard Taper Outer Joints with Viton® O-Ring

    Wilmad-LabGlass - SP Scienceware

    Used in laboratory equipment and instruments, these Standard Taper high vacuum outer joints are made of borosilicate glass and have a channel above the ground zone to accept the O-ring placed on an inner joint. May be used without O-ring as a standard medium length outer joint.

  • With 24mm O.D. drain extension near bottom for attaching stopcock shutoff valve. Shutoff is an 8mm bore PTFE plug stopcock with a #25 Ace-Thred at a right angle. Ace-Thred attaches to drain extension via a 7506-10 Nylon Bushing and FETFE O-Ring. The 9.

  • …or at the ends of the manifold with heavy wall rubber vacuum tubing. Serrated hose connection adapters list the OD of the hose connection at the middle ring. Each adapter is supplied complete with one #116 Viton o-ring. Adapters are to be attached to the manifold via a CG-150-05 S.S. pinch clamp.

  • …under tough, daily use. A considerable load can be suspended from the joint without danger. However, the clamps are designed primarily for securing the joint and are not intended to replace the usual clamps, rings, tripods, etc. as ordinarily used for supporting glassware assemblies. Size…

  • …provide greaseless, vacuum tight connection. All joints are held together with our 7669 family of pinch clamps, except for code -18 for which we use our 6509-03 two-piece clamp. O-rings are Fetfe and may be used up to 230 degrees C. Each joint is supplied with one o-ring. For replacement o-rings,…

  • Vacuum Single Manifold, High Vacuum Valves, #15 O-Ring Joints: Ports: 4, Valve Size: 0-8mm

  • Similar to CG-135 flange but with the mating end of the flange having a precision formed o-ring groove instead of being ground. Joint provides a grease-free vacuum tight seal when used with the CG-139 clamp. O-ring is included with each flange and can be ordered separately, see CG-305.

  • Straight connecting adapter, 4mm glass plug stopcock, 15mm O-Ring top joint and either a spherical joint or an inner standard taper joint on the bottom.

  • Spherical ball, precision ground, with groove for O-Ring, for use with matching socket members. Leak proof at high vacuums when clamped. O-Ring permits use without grease. Supplied with one FETFE O-Ring. For replacement O-Rings, see 7855. See 7669 or 7670 for clamps.

  • Adapter, 15mm o-ring joint to Ace-Thred, fetfe o-ring included.

  • Vacuum Trap Body Joint: 45/50 O-ring Joint Size: #15 Outer Body OD: 50mm Outer Body Length: 250mm below joint supplied with two size 116 Viton O-rings

  • With Ace-Threds or Ace-Thred and joints. Accepts a single 5mm or 10mm O.D. NMR Tube. Solvent reservoir capacity is 55mL. All threaded versions have a filter flask with a #15 Ace-Thred at top and O-Ring and #11 Ace-Thred side port with a removable Ace-Safe hose connection. Threaded-jointed version…

  • …3 or 4 port configuration with 0-10 Easy Action stopcocks. Order with either 14/20, 24/40 inner joints or #15 o-ring joints on ports. Distance between ports is 95mm which allows for use of flasks up to 3 Liters. Please see our various o-ring joint adapters such as Ace codes 5127, 5128 and 5129.

  • Storage Flask, #15 O-ring Joint Capacity: 250, 500 and 1000mL available Valve Size: 0-4 or 0-8mm available Approximate Height: 160, 1960, and 220mm available.

  • Safe-Lab® Joint Tubing Adapters

    Bel-Art - SP Scienceware

    …of glass tubing to be adjusted as required. An O-ring on the taper provides best sealing and the threaded polypropylene extracting nut ensures effortless removal. NOT autoclavable Safely and securely positions glass tubing in a 24/40 joint. Available for 8 and 10mm diameter glass tubing…

  • Adapter, #15 O-ring joint to 14/20, 19/22 or 24/40 inner joint

  • …hollow high vacuum stopcocks. This four–port manifold is fitted with two 14/20 and 24/40 inner joints, and is 100mm center to center joints.#15 O-ring joint stopper (S480015) and #15 O-ring joint to serrated hose adapter have to be ordered separately. Viton® O-rings can be ordered using…

  • …MEDIUM WALL TUBING. Glass wool (not supplied) is used to support column packing. Lower end of the column has a round bottom. Connections between the column, reservoir and flow control adapter are made using Rodaviss® joints. The unique design of the Rodaviss® joint affords a grease free…

  • These borosilicate glass single neck round bottom flasks have a threaded Standard Taper 14/10 outer joint. They come with one 20-400 open top nylon screw cap and one size 014 Viton® O-ring.

  • Vacuum Double Manifold, High Vacuum Valves, #15 O-Ring Joints: Ports: 4, Valve Size: 0-8mm

  • …vacuum manifold with #15 o-ring joint ends. Available with 3 or 4 high vacuum stopcock ports. Order with inner joint port ends (14/20 or 24/40) or #15 o-ring joints. The distance between ports is 95mm, ideal for flasks up to 250mL. Please see our various o-ring joint adapters such as Ace codes 5127,…

  • …taper joint inserts for 6472 series flat glass heads. This low profile insert allows for increased working space above the head. The insert is secured to the head with a reverse threaded locking nut and sealed using a FETFE O-Ring. The top of the insert is formed to allow the use of 7597 joint

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.