O Ring Glass Joints

Compare Tool

Select up to 3 products

O Ring Glass Joints
1 - 32 of 235
Sort
View
Show
  • Joints - Rodaviss

    Ace Glass

    Glass joint, inner ground with ring on shank for use with threaded outer member or outer member with external thread for use with inner member.O-Ring and cap to form a leak tight-seal. For cap, see 7616; for O-Ring, see 7617.

  • Borosilicate glass valve adapter with various Hi-Vac valve sizes and (2) No.15 O-Ring joints. Ideal for assembling Schlenk or vacuum lines Comes with (2) size -116 FETFE O-Rings.

  • With Ace-Threds or Ace-Thred and joints. Accepts a single 5mm or 10mm O.D. NMR Tube. Solvent reservoir capacity is 55mL. All threaded versions have a filter flask with a #15 Ace-Thred at top and O-Ring and #11 Ace-Thred side port with a removable Ace-Safe hose connection. Threaded-jointed version…

  • …MEDIUM WALL TUBING. Glass wool (not supplied) is used to support column packing. Lower end of the column has a round bottom. Connections between the column, reservoir and flow control adapter are made using Rodaviss® joints. The unique design of the Rodaviss® joint affords a grease free…

  • …hollow high vacuum stopcocks. This four–port manifold is fitted with two 14/20 and 24/40 inner joints, and is 100mm center to center joints.#15 O-ring joint stopper (S480015) and #15 O-ring joint to serrated hose adapter have to be ordered separately. Viton® O-rings can be ordered using…

  • Adapter, 15mm o-ring joint to standard taper or ball joints with o-ring seals. Fetfe o-rings for both joints are supplied.

  • Used in laboratory equipment and instruments, these Standard Taper high vacuum outer joints are made of borosilicate glass and have a channel above the ground zone to accept the O-ring placed on an inner joint. May be used without O-ring as a standard medium length outer joint.

  • …and instruments, these Standard Taper high vacuum inner joints are made of borosilicate glass and have a groove above the ground zone for a Viton® O-ring. This forms a vacuum-tight seal when used with a mating outer joint. No lubricants are required. Just twist to assemble or disassemble.…

  • Borosilicate glass vacuum/NO-AIR trap. Simliar to 8755 traps but with No. 15 O-Ring side connecting joints. Ideal for vacuum cart and other vacuum or NO-AIR applications. Comes complete with stainless steel ball-joint clamp and Viton O-Ring.

  • Vacuum Double Manifold, High Vacuum Valves, #15 O-Ring Joints: Ports: 4, Valve Size: 0-8mm

  • Vacuum Single Manifold, High Vacuum Valves, #15 O-Ring Joints: Ports: 4, Valve Size: 0-8mm

  • …3 or 4 port configuration with 0-10 Easy Action stopcocks. Order with either 14/20, 24/40 inner joints or #15 o-ring joints on ports. Distance between ports is 95mm which allows for use of flasks up to 3 Liters. Please see our various o-ring joint adapters such as Ace codes 5127, 5128 and 5129.

  • …vacuum manifold with #15 o-ring joint ends. Available with 3 or 4 high vacuum stopcock ports. Order with inner joint port ends (14/20 or 24/40) or #15 o-ring joints. The distance between ports is 95mm, ideal for flasks up to 250mL. Please see our various o-ring joint adapters such as Ace codes 5127,…

  • …taper joint inserts for 6472 series flat glass heads. This low profile insert allows for increased working space above the head. The insert is secured to the head with a reverse threaded locking nut and sealed using a FETFE O-Ring. The top of the insert is formed to allow the use of 7597 joint

  • …of glass tubing to be adjusted as required. An O-ring on the taper provides best sealing and the threaded polypropylene extracting nut ensures effortless removal. NOT autoclavable Safely and securely positions glass tubing in a 24/40 joint. Available for 8 and 10mm diameter glass tubing…

  • With 24mm O.D. drain extension near bottom for attaching stopcock shutoff valve. Shutoff is an 8mm bore PTFE plug stopcock with a #25 Ace-Thred at a right angle. Ace-Thred attaches to drain extension via a 7506-10 Nylon Bushing and FETFE O-Ring. The 9.

  • Adapter, 15mm o-ring joint to Ace-Thred, fetfe o-ring included.

  • Adapter, #15 O-ring joint to 14/20, 19/22 or 24/40 inner joint

  • Straight connecting adapter, 4mm glass plug stopcock, 15mm O-Ring top joint and either a spherical joint or an inner standard taper joint on the bottom.

  • Used to connect Ace-Thred to malejoint. Fabricated from PTFE. Supplied with one FETFE O-Ring.

  • …reaction vial with standard taper outer joint externally threaded at opening to allow an o-ring cap seal connection with mating male joints. This connection type eliminates the need for clamps while offering the positive, leak-tight seal of ground glass joints. Vials include drilled cap with o-ring…

  • Erlenmeyer flask with standard taper joint. Microscale versions, codes -42 & -44 have a 14/10, externally 20-400 threaded joint and supplied with a holed cap, PTFE faced silicone septum and FETFE o-ring.

  • …under tough, daily use. A considerable load can be suspended from the joint without danger. However, the clamps are designed primarily for securing the joint and are not intended to replace the usual clamps, rings, tripods, etc. as ordinarily used for supporting glassware assemblies. Size…

  • Adapter, o-ring joint to size E hose connection, fits 3/8"-7/16" id tubing, fetfe o-ring included

  • Adapter, 15mm o-ring joint to tubing. Sized for compression fittings. FETFE o-ring included.

  • Adapter, 15mm o-ring joint to standard taper outer joint , fetfe o-ring included.

  • Vacuum Trap Body Joint: 45/50 O-ring Joint Size: #15 Outer Body OD: 50mm Outer Body Length: 250mm below joint supplied with two size 116 Viton O-rings

  • Storage Flask, #15 O-ring Joint Capacity: 250, 500 and 1000mL available Valve Size: 0-4 or 0-8mm available Approximate Height: 160, 1960, and 220mm available.

  • …port configuration with 4mm bore glass double oblique stopcocks. The ports can be ordered in 14/20, 24/40 standard taper or #15 o-ring joints. The distance between ports is 210MM which allows for use of flasks up to 3 Liters. Please see our various o-ring joint adapters such as Ace codes 5127, 5128…

  • …#15 o-ring joint ends. Available in 3 or 4 port configuration with Easy Action 0-10MM stopcocks. The ports can be ordered with either 14/20, 24/40 inner joints or #15 o-ring joints. Distance between ports is 100MM which will allow for flasks up to 250mL. Please see our various 0-ring joint adapters…

  • Stopper, Cap Design, for #15 O-ring joint.

  • Storage Vessel, #15 O-ring Joint Capacity: 50, 100, and 350mL available Valve Size: 0-4 or 0-8mm available Approximate Height: 190, 235 or 240mm available.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.