Nut And Ferrule

Compare Tool

Select up to 3 products

Nut And Ferrule
1 - 32 of 87
Sort
View
Show
  • Nuts, Front and Back Ferrule Sets

    Agilent Technologies

    … Kit includes the following: Ten 1/8 in. nuts, brass Ten 1/4 in. nuts brass Ten 1/8 in. front ferrules, brass Ten 1/4 in. front ferrules, brass Ten 1/8 in. back ferrules, brass Ten 1/4 in. back ferrules, brass Six 1/4 in. caps, brass Six 1/8 in.…

  • Nuts & Ferrules for Valco Connectors (1/16" Stainless Steel)

    Restek

    Valco fittings have been designed for the specific demands of instrumentation and manufactured with the tight tolerances and premium quality that analysts require.

  • MSD Conversion Fitting

    Restek

    …Vespel ferrule seals the column and 1/16-inch stainless steel nut Fitting is constructed of nickel-plated brass for longevity and softness Use any standard Vespel or Vespel/graphite 1/16-inch ferrule Includes a 1/16-inch stainless steel nut and two replacement sealing rings. Order ferrules

  • Packed Column Inlet Adaptor Kit for 1/4" Injection Ports

    Restek

    …injection ports. Centers column perfectly in injection port to eliminate bent syringe needles. Slotted design prevents carrier gas occlusion. Vespel/graphite reducing ferrules make installation easy. Includes all nuts & ferrules used to attach tubing to the injector or detector.

  • EXP Titanium Hybrid Replacement Ferrules

    Restek

    …UHPLC connection with either fitting style, simply wrench-tighten an extra 1/4 to 1/2 turn. EXP ferrules should only be used with genuine EXP nuts. When used with an EXP nut, the EXP ferrule provides repeated ZDV (zero dead volume) connections to any 10-32 female threaded port, including Restek…

  • Ferrules for Agilent 5890, 6890 and 6850 Instruments

    Thermo Scientific

    …These easy-to-use ferrules form a soft grip with the column and provide a stable seal. SilTite™ Metal Ferrules SilTite™ metal ferrules and nuts are made from the same material and have the same thermal expansion coefficient. The SilTite ferrule forms a strong, permanent,…

  • Parker Nut & Ferrule Sets

    Restek

    Please note: Nuts and ferrules are not treated unless requested (custom parts). Nuts and ferrules normally are not in contact with sample pathway, and thus do not require coating.

  • High Pressure Stainless Steel Nuts and Ferrules

    Thermo Scientific

    Accommodate a wide range of configurations Designed for 10-32 port configurations Burr and contaminant free

  • Parker Front Ferrules

    Restek

    Please note: Nuts and ferrules are not treated unless requested (custom parts). Nuts and ferrules normally are not in contact with sample pathway, and thus do not require coating.

  • Chromatography Nuts

    SGE

    Spanner (wrench) sizes and uses: 3/16" for use with mini unions, 1/4" for use with 1/16" nuts, 5/16" for use with micro control valves. For standard nuts use reducing short ferrules. For extended nuts use straight or reducing ferrules.

  • Upchurch PEEK Fingertight Fitting nut and ferrule 10-32

    MilliporeSigma

    Material: PEEK nut and ferrule Packaging: pkg of 10 ea I.D.:  0.0625 in. (1.5875 mm) Fitting:  nut and ferrule 10-32 General description The one-piece fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy found…

  • Injector Nut Kit for Shimadzu 17A, 2010, and 2014 GCs

    Restek

    Includes 17A injector nut, 0.4 mm graphite ferrule, and 1/16-inch stainless steel capillary nut.

  • Parker Back Ferrules

    Restek

    Please note: Nuts and ferrules are not treated unless requested (custom parts). Nuts and ferrules normally are not in contact with sample pathway, and thus do not require coating.

  • Capillary Column Ferrules

    Agilent Technologies

    …deliver one ferrule at a time, keeping the others clean and ready for use. The dial packaging has been tested to ensure no out gassing of contaminants, including phthalates. *These ferrules are recommended for use with Agilent GC/MS Transferlines with the MS interface column nut (2713M98). …

  • Supelco Ferrule Nut Adapter (fits Agilent injectors and non-MS detectors),…

    MilliporeSigma

    These stainless steel adapters enable you to use general purpose and other 1/16 in. compression ferrules in Agilent GCs. Hexagonal shape allows tightening with a wrench to keep fingers from getting burned.

  • Finger-Tight Capillary Column Nuts

    Restek

    Allow wrench-free column installations Available for standard (1/16") and compact (Agilent-style) ferrules Made from high-quality stainless steel

  • Vu-Tight Installation Fittings Kit

    Restek

    Includes a 1/4-inch stainless steel nut and graphite ferrule for attaching the liner to the GC inlet and a 1/4 to 1/16-inch stainless steel reducer, plus a 1/4-inch and 0.5 mm ID graphite ferrule for attaching the column to the liner.

  • Empty Chromatography Columns

    Restek

    316 stainless steel tubing complete with end-fittings, frits, nuts, and ferrules Preassembled prior to shipment Internal 1/16" seats are compatible with Valco and Parker fittings

  • Graphite/Vespel® Ferrule Mini Unions

    SGE

    …and precise glass lined bore Supplied with 15% Graphite 85% Vespel® ferrules 100% graphite ferrules available separately Packs contain 1 mini union, 2 nuts and 5 ferrules (103431 supplied with ferrules for 0.1-0.25mm ID columns. 103432 supplied with ferrules for 0.32mm ID columns.)

  • DI Liner Adaptor for Agilent 5890 Packed Column GC

    Restek

    Uses standard 1/16-inch capillary nut and ferrules Convenient wrench pad at base Includes 1/4-inch graphite ferrule and stainless steel nut Use with Agilent or Restek DI glass inserts or Restek DI Uniliner liners for an Agilent 5890 packed column GC

  • MSD Source Nut

    Restek

    1.2 mm nut bore permits easy removal of ferrules with a standard tapered-needle file (cat.# 20106) Made of brass to prevent thread-stripping on the transfer line Design enhances ease of threading onto the transfer line and improves overall lifetime

  • Rheodyne Style Nut and Ferrule

    Restek

    Replacement long nut for connecting stainless steel tubing to a Rheodyne 6-port valve or other Rheodyne part.

  • Parker Nuts

    Restek

    Please note: Nuts and ferrules are not treated unless requested (custom parts). Nuts and ferrules normally are not in contact with sample pathway, and thus do not require coating.

  • Valve Loops For GC

    Agilent Technologies

    Include loop, nut and ferrule, 1/16 in.

  • CHROMAFLEX® Fittings

    DWK Life Sciences (Kimble)

    Tubing nuts and ferrules are used to make connections between the tubing and the end fittings of CHROMAFLEX® columns.

  • SUPELCO Supelco® Helium Purifier

    MilliporeSigma

    stainless steel fittings, 1/4 in. Swagelok (nuts and ferrules included) Synonym(s): Supelco ® HELIUM GAS PURIFIER, 1/4IN FITTINGS

  • Capillary Column Nut (fits Agilent injectors and non-MS detectors), hexagonal…

    MilliporeSigma

    These stainless steel column nuts are replacements for damaged or misplaced original Agilent nuts. Use with short ferrules. Hexagonal shape allows tightening with a wrench to keep fingers from getting burned.

  • SUPELCOSIL™ LC-NH2 Supelguard™ Cartridge

    MilliporeSigma

    eCl@ss 32110501 Footnote Kit includes one cartridge, a stand-alone holder, a piece of tubing, and 2 nuts and ferrules. Legal Information SUPELCOSIL is a trademark of Sigma-Aldrich Co. LLC Supelguard is a trademark of Sigma-Aldrich Co. LLC

  • Sample Inlets

    Restek

    Inlets have 1/4" stainless steel compression fitting on each end One end connects to flow controller or canister; nut on other end serves as rain guard Includes nuts and ferrules Two different lengths for use with large canisters and miniature canisters

  • Tekmar Fritless Sparger

    Chromatography Research Supplies

    …consistency Glassware is designed for Tekmar instruments. Made by a special fixture-based process which affords piece-to-piece consistency. Tops are fire-polished for smoothness. Kits include sparger, replacement stainless steel needle (tube), plastic hand-tightened nut and ferrule.

  • Column Blank Kit for HPLC

    MilliporeSigma

    Each column blank kit includes a precision-bore polished 316 stainless steel column blank, two zero dead volume external reducing unions (internal unions with 10 mm I.D. blanks) with nuts and ferrules for 1/16 in. O.D. tubing, and two 2 μm frits.

  • Extended Capillary Column Nuts for Agilent 5890/6850/6890/7890 GCs

    Restek

    …cup for easy, breakage-free column installation without removing cup. Finger-tight design to allow wrench-free use. Available for standard (1/16") and compact (Agilent-style) ferrules. Made from high-quality stainless steel. Meets or exceeds original manufacturer's performance.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.