No 5 Stopper

Compare Tool

Select up to 3 products

No 5 Stopper
1 - 32 of 58
Sort
View
Show
  • …filter support, anodized aluminum spring clamp, and silicone stopper. Parts are also available seperately. Filter Diameter: 25mm, Filtration area is 2.5cm². Capacity: Funnel: 15ml. Outlet fitting: No. 5 perforated silicone stopper mounts in standard 125ml flask. Membrane Prefilter: 25mm.…

  • …filter support, anodized aluminum spring clamp, and silicone stopper. Parts are also available seperately. Filter Diameter: 25mm, Filtration area is 2.5cm². Capacity: Funnel: 15ml. Outlet fitting: No. 5 perforated silicone stopper mounts in standard 125ml flask. Membrane Prefilter: 25mm.…

  • Size No. 000, 00 and 0 have hole 3 mm diameter; sizes No. 1 and 2 have hole 4 mm in diameter; all other sizes have hole 5 mm in diameter.

  • 125 ml Flask, Filter, Grad, No 5 Stopper Jt

    DWK Life Sciences (Wheaton)

  • Standard Grade Size No. 000 is 18 mm long; sizes No. 00 to No. 13 are 25 mm long. Sizes No. 13 1/2, 14 and 15 are 35 mm, 36 mm and 39 mm respectively.

  • Suitable for solution and media storage Graduated in 500 mL increments, with accuracy ±5% 1729C95 has carboy form; all take No. 12 stopper

  • XX2014718

    MilliporeSigma

    Designed for use with Millipore stainless steel vacuum filter holders Stopper Size: No. 8 Hole I.D.: 9.5mm (3/8 in.) Silicone rubber construction

  • …has excellent chemical resistance and withstands continuous service at 130°C Autoclavable 2,000 mL flasks have molded-in graduations Stopper size: 50 mL flask No.1; 125 mL flask No.3; 250 mL flask No.6; 500 mL flasks No.7; 1,000 mL flask, No.8; 2,000 mL flask, No.10. NOTE: before…

  • Clear Glass With No Stopper Pipet access is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars …

  • PVC Manifold

    Advantec MFS

    …acids Standard cup accepts a No.8 or 8b stopper Lightweight and durable PVC material makes this vacuum manifold a great alternative to stainless steel. Polyvinylchloride(PVC) is resistant to acids. The standard cup accepts a No.8 or 8b stopper to adapt to microanalysis units of various…

  • Erlenmeyer flask with included stopper top. No graduations.

  • Standard Grade Sizes No. 00, 0 and 1 have holes 2, 3 and 4 mm diameter, respectively; all other sizes have holes 5 mm diameter

  • …100, 500, or 1000 mL. The 13mL/100mL  features a two-part ground glass funnel for concentrating samples. The 13mL micro funnel mounts directly over the membrane. The No.5 silicone stopper mounts in a standard 125mL filter flask. Unit includes: Funnel, Sintered glass base, Clamp, Stopper

  • KimCote® Filtering Side Arm Flasks

    DWK Life Sciences (Kimble)

    …leakage of toxic or corrosive chemicals The plastic safety coating is steam-autoclavable The 125mL flask has a No. 5 stopper joint The 1, 2 and 4 liter flasks have a No. 8 stopper joint All flasks have a side arm for connection to 3/8” (6 mm) ID flexible tubing Manufactured from…

  • No. 8 Perforated Stopper

    MilliporeSigma

    Designed for use with 1L and 4L vacuum filtering flasks and 47mm vacuum filter holder assemblies 100% Silicone Material Perforated, 1-hole accepts filter holder assemblies and tubing Pack of 5

  • Serum Bottle Stoppers

    DWK Life Sciences (Wheaton)

    Stoppers come in a variety of elastomer formulations. Natural rubber is a general-purpose elastomer used primarily for aqueous liquid fill products in the 4.0-7.5 pH range. Its resealability is an advantage in multi-dose applications. The formulation uses dry natural rubber and no liquid…

  • …flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 13 Standard Taper glass stoppers. For replacement stoppers see No. 7650. These Class A volumetric flasks have been manufactured to Class A tolerances as established by ASTM E- 694…

  • RAY-SORB Processed Glass with No Stopper Pipet access is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with…

  • This Corning® kit is similar to No. 6949E, as many of the same standard laboratory experiments can be performed with this kit. The kit’s PYREX® components all use 19/22 Standard Taper joints for standardization. Note in particular the inclusion of a 250mL flask with side tubulation, which is useful…

  • …materials suitable for road treatment. Also used in the Standard Method of Test of the Distillation of Creosote Oil, American Wood Preservers Association, method 11e, Barrett method C 9, American Association of State Highway Officials, methods T 52 and T 62. Flasks take a No. 5 rubber stopper.

  • …in one piece with bottle Molded-in handles for ease in transporting containers Molded-in graduations in 1 gal. and 5L increments Neck accepts No. 13.5 rubber stopper Autoclavable/Graduated/Leakproof Ordering Information: Both sizes accept 0.5in. I.D. (1.3cm) tubing - Not…

  • These PYREX® glass separatory funnels have Rotaflo® stopcocks and strong, hollow Standard Taper glass stoppers. A glass stopper is also included for your convenience. Stem O.D. is 10mm. For replacement glass stoppers, see No. 7650 and for polyethylene stoppers, see No. 7624.

  • …to those on all cylinders, has been added. The graduation line is sharp and permanent and the white markings are easy to read.  Flasks with capacities of 1, 2 and 5 mL come with a No. 8 PYREX stopper while 10 and 25 mL capacity versions are supplied with a No. 9 stopper. Reference: ASTM E-237.

  • …Glass Filter Holders. This item is an accessory item for multiple kits.Features & Benefits:. Side arm connects to vacuum source with 3/8 in. I.D. hose. 1 L and 4 L flasks accept No. 8 perforated stopper. 125 mL flask accepts No. 5 stopperApplications:Vacuum Filtration Using Classic Filter Holders

  • …made from specially molded blanks which are tapered toward the stopcock to facilitate the separation of liquids. Their sturdy design makes them excellent for rack work. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

  • Nalgene Polypropylene Carboys

    Thermo Scientific Nalgene

    …series Graduated to contain in 1-gallon and 5-liter increments Two molded handles and size 83B polypropylene screw cap; also accepts No. 13 1/2 rubber stopper in place of cap Not recommended for use with hazardous materials Autoclavable and leakproof Dimensions: 10 liter carboy: 15 1/4”…

  • Coated to neck with PVC safety coating to reduce potential breakage and exposure to laboratory personnel when handling hazardous material. Carboy style bottles with sloping shoulders. Necks are tooled for uniform fit with stoppers. Uses No. 12 stopper

  • …to systems such as fermentors or chromatography columns. Features: Molded-in handles for ease in transporting containers Molded-in graduations in 1 gal. and 5L USPVI/Autoclavable/Graduated/Leakproof Includes: Size 83B closure; accepts No. 13.5 rubber stopper.

  • Small filtering flasks are recommended for microchemical use All flasks have permanent white-enamel marking spots Takes rubber stopper No. 3; 50 mL size, No. 4; 125 mL size, No. 5

  • Solvent Collector

    Ace Glass

    Used for collection and short term storage of solvents. With 2 mm bore PTFE stopcock and standard taper 14/20 joint. A serum cap stopper is used on side port for syringe removal of solvents.

  • …and simplifying the specimen handling process Stoppers contain no TBEP. The tubes can be used for serum, plasma or whole blood based on their color-coded tops. Vacutainer tubes are available with the conventional rubber stopper or a Hemogard™ closure. The Hemogard™ closure…

  • …longer, tapered plug that seats firmly inside the glass joint or tube providing a sealing surface that is 50 to 80% greater than standard sleeve stoppers. The inner seal design of Precision Seal septa minimizes chemical and solvent vapor migration up the joint to the sleeve which can swell, leak, or…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.