Nalgene Carboy

…place of cap Not recommended for use with hazardous materials Autoclavable and leakproof Dimensions: 10 liter carboy: 15 1/4” high; 20 liter carboy 20 1/2” high; 50 liter carboy 26 1/2” high. Before autoclaving, set cap or closure on top of container without engaging threads.

Platinum cured silicone Recommended for use with 2261, 2630 and 2640 series carboys and 2688 and 2689 series end caps. Autoclavable Meets USP Class VI requirements.

Polyvinylidene fluoride All plastic autoclavable threaded clamp system Recommended for use with 2630 and 2640 series carboys, 2688 and 2689 series end caps

1753C67 is a standard spigot for carboys (Nalge 6422) 1753D30 spigot is needle type for tanks (Nalge 6421) Both are polypropylene with thread size 1 1/8” - 12 female screw thread Includes removable tubing adapter for smaller tubing; fits sizes (1/4” or 5/16” i.d.) 5/8”…

…handles and size 83B polypropylene screw cap Leakproof Graduated to contain in 1-gallon and 5-liter increments Dimensions: 20 liter carboy: 20 1/2” high, 11 1/4” o.d.; 25 liter carboy: 23 1/2” high, 11 1/4” o.d.; 50 liter carboy: 26 1/2” high, 14 3/4” o.d.

…and eliminate the cost of cleaning, sterilizing and associated validations. Use sterile, ready-to-use Thermo Scientific™ Nalgene™ Biotainer™ Bottles and Carboys, designed specifically for pharmaceutical and biological manufacturers. Excellent for freezing applications.

…filtration applications Useful for maintaining purified water stored in carboys Features a Teflon PTFE membrane Hydrophobic membrane permits sterile venting on a slow exhaust/liquid autoclave cycle of carboys up to 50L Can be used up to five times in venting applications …

…mixing of large volumes of media and buffer solutions on a magnetic stir plate For use with Nalgene 10 and 20-liter carboys with 83B (83-mm) closures Adjusts easily to fit either a 10 or 20 L carboy No magnet to retrieve Supplied with an 83-mm closure and two TFE impellers Must be used with…

Thermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …

Thermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …

…ready-to-use Thermo Scientific™ Nalgene™ Single-Use HDPE Carboys. Supplied sterile for one-time use, the high-density polyethelyne vessels are ideal for storing sterile fluids and pharmaceutical/biotech products. Features HDPE Carboy with polypropylene closure Sterile …

…polycarbonate Autoclavable at 121°C Lot traceable/lot controlled Polycarbonate carboys are clear, tough and can be used from -100 to +121°C. Lighter and safer than glass, these carboys can hold 20 liters nominal or 22.5 liters brim capacity. Easily identified by catalog and…

…shoulder loops have attached handle Space saving rectangular shape Excellent for collecting and dispensing distilled water Tough, rigid and translucent Dimensions: 9 liter carboys measure 8 1/2” x 5 3/4” x 14”; 20 liter carboys measure 12 1/2” x 8 5/8” x 15”.

Nalge 2318 series Supplied with cap and Thomas number 1753C67 spigot Leakproof Sizes 10 L and larger have two molded handles and take Cap No. 83B; 4 L size takes Cap No. 38-430 Graduated to deliver in 1-gallon and 5-liter increments. 4 L is not graduated.

Ensure more complete drainage with the low outlet of Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Carboys with Bottom Tubulation, excellent for distilled water and culture media. Features: Bottom tubulation molded in one piece with bottle Molded-in handles…

Use the Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Carboys with 1.5" Sanitary Flanges as dispensing ports or with secure hookup for supply reservoirs to systems such as fermentors or chromatography columns. Features: Molded-in handles for ease in…

…esters, hydrocarbons, etc. Graduated to contain in 1-gallon and 5-liter increments Neck i.d. 2 3/4” Dimensions: 10 liter carboys measure 15 high x 10 o.d.; 20 liter carboys measure 21 high x 11 1/2 o.d. NOTE: Before autoclaving, set cap on top of carboy without engaging threads.

…series Autoclavable and leakproof Similar to 1753C10 series, but made entirely of polypropylene, including spigot and size 83B cap with TPE gasket. Before autoclaving, set closure on carboy without engaging threads. Dismount and disassemble spigot before autoclaving. Autoclave only when empty.

Useful with most acids, alkalies and aggressive organic solvents Fluorination enhances long-term container performance and prevents permeation loss Split and puncture resistant; Tefzel spigot and fluorinated polypropylene screw closure Stainless steel carrying strap

Amber high-density polyethylene Amber polypropylene closure Convenient wide shoulder handles. Meets the U.S. Pharmacopoeia Light Transmission Test (USP latest edition) requirements for storage of light-sensitive materials. Excellent for storing and mixing photosensitive chemicals,…

…Leakproof Neck i.d. 3 1/2 inches Graduated to contain in 1-gallon and 5-liter increments Dimensions: 10 liter carboys measure 13 3/4” high x 9 7/8” o.d.; 15 liter carboys measure 15 1/4” high x 11 1/4” o.d.; 20 liter carboys measure 19 3/8” high x 11 1/2” o.d.

… Polypropylene screw cap, size 100 Leakproof Neck i.d. 3 1/2 inches 20 liter size has molded-in hand-grips Dimensions: 9-liter carboys measure 216 x 146 x 343 mm (8-1/2" x 5-3/4" x 13-1/2"); 20-liter carboys measure 318 x 219 x 381 mm (12-1/2" x 8-5/8" x 15").

…spigot is sealed by two Teflon® O-rings. Delivery spout takes 5/8” i.d. tubing; polyethylene adapter that takes 1/4” to 3/8” i.d. tubing is supplied. Dimensions (height x o.d.): 10 liter carboys measure 15” x 10”; 20 liter carboys measure 20 7/8” x 11”.

Light blue polycarbonate Silicone lined polypropylene closure Sterile, ready-to-use and provide safe storage from -100°C to 100°C Leak proof with molded-in graduations in mL Space-saving square shape Meet USP 87, 88 and are tested for pyrogenicity

… Safe, durable, cost-efficient, high-density polyethylene narrow mouth bottles are suitable for shipping Fluorocarbon surface, a Teflon ® -like skin provides improved barrier properties and reduces solvent absorption and penetration 10 L and 20 L carboys have handles Split and puncture-resistant

Store and transport solids, powders and liquids using Thermo Scientific™ Nalgene™ Wide Mouth Polypropylene Carboys with Handles. These durable natural polypropylene (PP) carboys feature a convenient wide-mouth opening to promote ease of cleaning and dispensing. The wide-shoulder…

…fluid transfer or sampling in biopharmaceutical applications with Thermo Scientific™ Nalgene™ Polypropylene Sanitary Carboys with 3" Sanitary Neck Design. The carboy's welded sanitary neck is easy to clean with no screw threads. Versatile with 3" sanitary…

Nalge 2321 series Rectangular carboy for storing and dispensing media, sterile water, etc. Autoclavable Similar to 1753F10 series, but of polypropylene, with stainless steel carrying strap Leakproof Autoclave only when empty. Before autoclaving, set cap or closure on top of the container…

Nalge 2212 With polypropylene screw closure 3 1/2” neck opening Sturdy handle is attached to molded-in shoulder loops Leakproof Autoclavable Ideal for storing solutions, media, and sterile water. Useful for handling large volumes of powders and other solid samples. Calibrated in liters…

Thermo Scientific™ Nalgene Closures for Large Carboys and Bottles are made of white polypropylene (PP). Screw Closures are designed to fit only Nalgene Carboys and Bottles to provide a guaranteed leakproof system. TPE Sealing Gasket for Nalge # 2162-0530

Nalge 2322 With polypropylene spigot and screw closure High-impact strength Leakproof Autoclavable Window-clear Sturdy handgrips Space-saving rectangular shape. All sizes feature molded-in graduations. Good for cold room use. Autoclave only when empty. Before autoclaving, set cap or closure…