Moisture Trap Glass

In-line moisture trap. Drierite indicating agent and MolecularSieve 5A are packed in glass which is enclosed in a safety plastic tube in the event the glass breaks. Unique loading design allows operation in any orientation without channeling. For use with pressures up to 100 psig. Designed for use…

…GC gas purifiers are available in different sizes and configurations such as combination gas traps that remove moisture, oxygen, and/or organics with a single trap. Using oxygen and moisture traps for carrier gas extends column life and protects the instrument. Removing hydrocarbons helps improve…

…GC gas purifiers are available in different sizes and configurations such as combination gas traps that remove moisture, oxygen, and/or organics with a single trap. Using oxygen and moisture traps for carrier gas extends column life and protects the instrument. Removing hydrocarbons helps improve…

…13X and a band of Indicating Molecular Sieve 4Å Available in 70 cc, 100 cc and 250 cc sizes Heavy wall borosilicate glass tube — no moisture diffusion Refillable The 100 cc unit will treat 10 standard “A” cylinders with up to 30 ppm water or 16.3 grams…

The glass indicating trap clearly shows when the filter needs to be replaced with the use of color changes. The packing material is a silica-based environmentally friendly substitute for cobalt dioxide (blue) in the moisture indicator. Available as a kit with the necessary 1/8" brass connectors, and…

For solvents heavier than water. Used in the method of quantitative separation and determination of glycol mixture by azeotropic distillation described in Analytical Chemistry, Vol. 29, No.1, Page 100. Capacity is 121/2mL, graduated in 0.1mL. Joints are standard taper 24/40.

…that surrounds the glass indicator section of the filter is sealed, so the gas flow is secure even if the glass is broken. Removes Moisture The Moisture trap removes water from inert gases, air or hydrogen to less than 20 ppb at flow rates up to 2 L/min. The trap has a capacity for water…

Unique adapter used in place of a Dean & Stark Moisture Test Receiver. Simply add a condenser to top standard taper outer joint, any graduated funnel from 125mL to 2000mL to bottom standard taper inner joint, attach sample flask to inner side arm joint and you have a moisture test receiver.

Unique adapter used in place of a Dean & Stark Moisture Test Receiver. Simply add a condenser to top outer joint, any graduated funnel from 125mL to 2000mL to bottom inner joint, attach sample flask to inner side arm joint and you have a moisture test receiver.

…yellowish-green to blue at 5% relative humidity Prepurged for fast stabilization Reduces noise from high-sensitivity detectors Heavy-walled glass body prevents oxygen and water infusion 10 µm frit prevents microparticulate damage to needle valves and flow controllers Maximum…

Calibrated "to contain" at 20°C, these borosilicate glass moisture traps are used for the determination of water in various materials by distillation with an immiscible solvent. They consist of a full length Standard Taper inner joint for vapor tube connection to distilling flask and a…

Made of borosilicate glass, these Bidwell-Sterling moisture traps are calibrated "to contain" (TC) at 20°C and are used for determining moisture in samples by distilling with an immiscible liquid. Consist of vapor tube, return tube, round bottom graduated tube, and Standard Taper 24/40…

…materials, these borosilicate glass Bidwell-Sterling moisture traps collect liquefied vapor. They feature a connection between top of vapor tube and graduated tube. This construction allows excess solvent to return to flask with minimal chance of condensed moisture return. Standard Taper 24/40 inner…

Adapter used to construct a simple moisture trap. Add a condenser to the top outer joint and a graduated funnel to the lower inner joint. Adapters with larger center to center spacing can be used with process reactors and larger flasks up to 50L.

…GC gas purifiers are available in different sizes and configurations such as combination gas traps that remove moisture, oxygen, and/or organics with a single trap. Using oxygen and moisture traps for carrier gas extends column life and protects the instrument. Removing hydrocarbons helps improve…

…GC gas purifiers are available in different sizes and configurations such as combination gas traps that remove moisture, oxygen, and/or organics with a single trap. Using oxygen and moisture traps for carrier gas extends column life and protects the instrument. Removing hydrocarbons helps improve…

…GC gas purifiers are available in different sizes and configurations such as combination gas traps that remove moisture, oxygen, and/or organics with a single trap. Using oxygen and moisture traps for carrier gas extends column life and protects the instrument. Removing hydrocarbons helps improve…

…GC gas purifiers are available in different sizes and configurations such as combination gas traps that remove moisture, oxygen, and/or organics with a single trap. Using oxygen and moisture traps for carrier gas extends column life and protects the instrument. Removing hydrocarbons helps improve…

Modified Dean-Stark trap allows for more efficient cooling and separation of the azeotrope during distillation. Graduated from 0 to 10ml in 0.2mL subdivisions. **Design suggested by Dr. Craig Merlic, University of California, Los Angeles, California

…Without the appropriate gas purifier, problems such as noisy baselines, moisture entering GC column, excessive bleed, reduced column lifetime and irreproducible results will occur. These problems are created by hydrocarbons, moisture and oxygen in the carrier gases. Advanced Gas Filter System …

…are packed in glass protected by an outer plastic tube in the event that the glass breaks. Unique loading design allows operation in any orientation without channeling. Designed for GC detectors that require high purity gases and recommended for ELCD and ECD systems where moisture and contamination…

This trap contains oxygen, moisture and hydrocarbons adsorbents in one trap and is packed and purged under helium. The glass indicating trap clearly shows when the filter needs to be replaced with the use of color changes. The packing material is a silica-based environmentally friendly substitute…

The glass indicating trap clearly shows when the filter needs to be replaced with the use of color changes. The packing material is a silica-based environmentally friendly substitute for cobalt dioxide (blue) in the moisture indicator. Available as a kit with the necessary 1/8" brass connectors, and…

… side arm • In accordance with ASTM Standards E 123 and D 95 for water in petroleum products • Graduated from 0 to 1 mL in 1/10 mL; maximum scale error: 0.05 mL; graduations over 1 mL in 1/5 mL; maximum scale error: 1/10 mL. 10 mL trap is approx. 237 mm long; 25 mL trap is aprox. 317 mm long.

…with two fluoro-elastomer seals. The polycarbonate shield that surrounds the glass indicator section of the filter is sealed, so the gas flow is secure even if the glass is broken. Removes Organics The Hydrocarbon trap removes C5 weight and heavier hydrocarbons from inert gases, air or hydrogen to…

…single-taper, glass wool, deactivated, 3 each Ferrule, Graphite 530 µm, 1.0 mm ID, 10/pk Ferrule, graphite 320 µm, 0.5 mm ID, 10/pk Graphite O-ring, 5700/5840/6890, 10/pk 6.52 mm ID, 9.63 mm OD, 0.062 in. OD seals, 10/pk O-rings, ungreased for trap fitting, 12/pk…

…design that maintains the required humidity. Microscope slides in the RapidFISH do not require coverslips to be glued because the removable tray traps moisture in the system. Elimination of this step decreases processing time and ensures that the specimens stay hydrated during processing. The system…

…longer a need for loosening and tightening fittings every time a trap is changed and your system will not become contaminated during the process. Carrier Gas Purity Carrier gas should contain less than 1ppm of oxygen, moisture, or other trace contaminants, to prevent column degradation, increase…

…longer a need for loosening and tightening fittings every time a trap is changed and your system will not become contaminated during the process. Carrier Gas Purity Carrier gas should contain less than 1ppm of oxygen, moisture, or other trace contaminants, to prevent column degradation,…

Filters and Traps - Protect Your Instrument and Capillary Column/Technical Results with the Correct High Quality Gas Filtration System. PerkinElmer has a wide assortment of filters that remove moisture, oils, dust, hydrocarbons, oxygen, sulfur compounds and more. Select the proper filter for your…