Mixer Stand

Compare Tool

Select up to 3 products

Mixer Stand
1 - 22 of 22
Sort
View
Show
  • Mixer Homogenizer

    Omni

    Since 1956 the Omni Mixer Homogenizer has been synonymous with laboratory homogenizers. The Omni Mixer Homogenizer is a powerful 600 watt homogenizer that is compatible with a wide range of generator probes, blade assemblies and sealed containers to offer the perfect mix of dependability,…

  • Stir-Pak® and Servodyne™ Mixer Accessories

    Oakton

    Tank clamp lets you mount a mixer head and a controller support (either model 04552-70 or 04552-75) directly onto an open top drum or container (maximum 1-1/2" [38 mm] wall thickness) Support stand has an electropolished cast steel base and 303 stainless steel support rod measuring 29"H x 5/8"…

  • Servodyne™ Electronic Mixers

    Oakton

    …complete with speed controller, mixer head, shaft, propeller, clamp, and stand. Note: High-torque models include keyless chuck. Low-torque models include collet. Mixer Heads Optical shaft encoder relays the exact motor rotation speed data to the electronic mixer controller. Adjustable-tilt…

  • Stir-Pak® Heavy-Duty Mixers

    Oakton

    …need! These convenient, ready-made systems come complete with a mixer head, speed controller, shaft, propeller, clamp, and stand. Note: High-torque models include keyless chuck. Low-torque models include collet. Mixer Heads Heads feature a TENV, permanent-magnet DC motor with permanently…

  • Stir-Pak® Dual-Shaft Mixers

    Oakton

    … Keyless chuck accepts shafts from 5/16" to 3/8" (8 to 10 mm) dia Mixer includes: Controller 6" (152 mm) L mounting rod and 6-ft (1.8-m) three-wire cord with plug Complete system adds: 3/8" (9.5 mm) dia x 12" (305 mm) L, shaft; 3" dia (76 mm dia) propeller; double clamp; and support stand

  • Stir-Pak® General-Purpose Mixers

    Oakton

    …shafts from 5/16" to 3/8" (8 to 10 mm) dia. Mixer includes: 3/8" (9.5 mm) dia x 12" (305 mm) L, 316 stainless steel shaft; 1-1/2" (38 mm) dia propeller; 6" (152 mm) mounting rod; and 6-ft (1.8 m) grounded cord with power supply. Complete system adds: double clamp and support stand.

  • LabJaws Support Stands

    Ohaus

    …legs accommodate rods, enabling the stand to support two mixers. The “U” shape of the base should be turned from the mixing apparatus when the two outside rods are in use. This balances the weight, preventing the base from tipping. Support Stand Stabilizer Knobs (mfg. no. 30400044)…

  • Heavy-Duty Support Stands

    Ohaus

    Heavy-Duty Support Stands have a four point cast iron base with stainless steel support rod. They are designed to accommodate vessels up to 12" (30.5 cm) in diameter to sit close to the support rod. They have rubber cushions on each of the four corners. The base area is 16.5" (41.9 cm)…

  • Stands & Clamps for Caframo Overhead Stirrers

    Caframo

    … This durable stand provides excellent stability for bench stop stirrers even when agitating viscous materials. The wide base and H configuration allow for a wide range of vessel sizes, while the 710 mm (28″) stand rod enables strong engagement with stand clamp. Portable and…

  • Talboys Overhead Mixers, Model 104 & 104X

    Troemner

    …shaft handles high viscosity mixing. Mixers include collet chuck and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. Support stands and holders sold separately. Durable and rugged multi-purpose mixers Wide range of speeds Moderate torque

  • Crossover Batch Mixer, Model 1540

    Caframo

    …your gloves! Control the mixer with a PC or PLC via USB, RS232 or 4-20 mA or data log speed and torque directly to a memory stick. Install immediately with standard 120V cord set, and four bolt mounting. Optional plate or C-clamp set attaches the Crossover to a stand or drum and allows optimal…

  • Talboys Overhead Mixer, Model 107 & 107SC

    Troemner

    …with two Model 152A propellers. Both models have a continuous duty rating. Mixers include collet chuck and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. Support stands and holders sold separately. Direct drives Brushless motors …

  • Stirrer, Single Shaft

    Troemner

    …low viscosity mixing. Each is configured with different speed control options. Mixers include collet chuck and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. Support stands and holders sold separately. Model 103 Table mounted Basic…

  • Overhead Stirrers

    Troemner

    …4136 mixers include collet and adjustable chucks and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. The model 409 (429) mixer includes adjustable chuck and 8" (20.3cm) mounting rod for mounting motor to support stands. Support stands and…

  • MyTemp™ 65 Incubators

    Benchmark

    …shelves can also be purchased separately. Accurate temperature control from 0 to 60°C Powerful compressor, maintains 0°C Stainless-steel internal chamber Internal power inlet for shakers, mixers, etc. Sized for floor standing use or on bench-tops (less than 32" tall)

  • Tissue-Tearor

    Biospec

    Small sample laboratory mixer and homogenizer Stainless steel rotor-stator Handy and mobile High speed, powerful 5,000 to 30,000 rpm motor with speed control Achieve any combination of mixing, emulsification, shredding or chopping. Homogenization in less than 1/2 mL treatable…

  • BioMixer

    Biospec

    …chopping Practical: Can be used with any suitable vessel anywhere in your laboratory Handy and mobile: Easy to hold or clamp it on a lab ring stand Simple to use: No sample loss due to transfers from a blender vessel. Just hold it in a beaker or other vessel and turn on the switch Easy to…

  • Reversing Digital Overhead Stirrer, Model BDC2010

    Caframo

    …time Set speed is maintained as viscosity changes Automatic overload protection 1177M20 includes support rod, chuck, chuck key, external power supply, and grounded North American power cord. Remember to order a stand, clamp and impeller for a complete system to start mixing.

  • Ultra Speed Overhead Stirrer, Model BDC6015

    Caframo

    …adjustment saves time Safely encloses spinning chuck to protect user Protects chuck from splashes Includes support rod, chuck, chuck key, chuck guard, and grounded North American power cord. Remember to order a stand, clamp and impeller for a complete system to start mixing.

  • Ultra Torque Overhead Stirrer, Model BDC1850

    Caframo

    …adjustment saves time Safely encloses spinning chuck to protect user Protects chuck from splashes Includes support rod, chuck, chuck key, chuck guard, and grounded North American power cord. Remember to order a stand, clamp and impeller for a complete system to start mixing.

  • Universal Overhead Stirrer, Model BDC3030

    Caframo

    …adjustment saves time Safely encloses spinning chuck to protect user Protects chuck from splashes Includes support rod, chuck, chuck key, chuck guard, and grounded North American power cord. Remember to order a stand, clamp and impeller for a complete system to start mixing.

  • Petite Digital Overhead Stirrer, Model BDC250

    Caframo

    …package. Included in each purchase: overhead stirrer motor, integral clamp, stainless steel collet, external power supply, grounded power cord, stand, axial and radial mixing blades, mixing shaft, manual in four languages (English, French, Spanish and German) and three year warranty. …

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.