Mixer Stand

Tank clamp lets you mount a mixer head and a controller support (either model 04552-70 or 04552-75) directly onto an open top drum or container (maximum 1-1/2" [38 mm] wall thickness) Support stand has an electropolished cast steel base and 303 stainless steel support rod measuring 29"H x 5/8"…

…legs accommodate rods, enabling the stand to support two mixers. The “U” shape of the base should be turned from the mixing apparatus when the two outside rods are in use. This balances the weight, preventing the base from tipping. Support Stand Stabilizer Knobs (mfg. no. 30400044)…

… Keyless chuck accepts shafts from 5/16" to 3/8" (8 to 10 mm) dia Mixer includes: Controller 6" (152 mm) L mounting rod and 6-ft (1.8-m) three-wire cord with plug Complete system adds: 3/8" (9.5 mm) dia x 12" (305 mm) L, shaft; 3" dia (76 mm dia) propeller; double clamp; and support stand

…4136 mixers include collet and adjustable chucks and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. The model 409 (429) mixer includes adjustable chuck and 8" (20.3cm) mounting rod for mounting motor to support stands. Support stands and…

Since 1956 the Omni Mixer Homogenizer has been synonymous with laboratory homogenizers. The Omni Mixer Homogenizer is a powerful 600 watt homogenizer that is compatible with a wide range of generator probes, blade assemblies and sealed containers to offer the perfect mix of dependability,…

… This durable stand provides excellent stability for bench stop stirrers even when agitating viscous materials. The wide base and H configuration allow for a wide range of vessel sizes, while the 710 mm (28″) stand rod enables strong engagement with stand clamp. Portable and…

Heavy-Duty Support Stands have a four point cast iron base with stainless steel support rod. They are designed to accommodate vessels up to 12" (30.5 cm) in diameter to sit close to the support rod. They have rubber cushions on each of the four corners. The base area is 16.5" (41.9 cm)…

…of both speed and run time. The stirrers include a support stand complete with mounting hardware.  The mixer is easily attached at the desired height for compatibility with a wide range of vessels (up to 24 inches tall). The stand and 4-arm propeller are included.  A wide range of optional…

The PureProteome Magnetic Stand is designed to rapidly and easily isolate magnetic particles from up to eight 1.5 mL or 2.0 mL tubes. The stand features a removable magnet bar and unique vortex interface that engages with a 3.5" (8.89 cm) diameter flat top vortex mixer to enable thorough mixing…

…your gloves! Control the mixer with a PC or PLC via USB, RS232 or 4-20 mA or data log speed and torque directly to a memory stick. Install immediately with standard 120V cord set, and four bolt mounting. Optional plate or C-clamp set attaches the Crossover to a stand or drum and allows optimal…

…of larger volumes and/or high viscosity materials.  The homogenizer deflector head design creates vertical movement of heavy materials which would otherwise stand stagnant, and promotes increased flow of larger volume samples.       

…shelves can also be purchased separately. Accurate temperature control from 0 to 60°C Powerful compressor, maintains 0°C Stainless-steel internal chamber Internal power inlet for shakers, mixers, etc. Sized for floor standing use or on bench-tops (less than 32" tall)

Small sample laboratory mixer and homogenizer Stainless steel rotor-stator Handy and mobile High speed, powerful 5,000 to 30,000 rpm motor with speed control Achieve any combination of mixing, emulsification, shredding or chopping. Homogenization in less than 1/2 mL treatable…

…control. Additional feature such as the Dual-Power Light Indicator for simpler error/problem identification and the PRO TRAC stand, which is a motorized stand developed by PRO Scientific for effortless, accurate, and smooth motor position, forms the most advanced digital benchtop high-shear…

…Unit, 7mm X 75mm saw-tooth generator probe, 10mm X 115mm saw-tooth generator probe, PRO200 Stand Assembly.  1204B58 includes: 115V Bio-Gen PRO200 High-Shear Homogenizer Unit, 7mm X 75mm saw-tooth generator probe, 10mm X 115mm saw-tooth generator probe, PRO200 Stand Assembly. 

…in USA and includes 2 Year Warranty High-torque motor with a variable speed adjustment, 5000 to 35000 rpm Use hand-held or post mount to a stand Offering plenty of power and useful features, the 115V Bio-Gen PRO200 homogenizer unit has a 144 watt, high-torque motor with a variable…

…processing volumes from 0.03ml to 5L High-torque motor with a variable speed adjustment, 10000 to 30000 rpm Use hand-held or post mount to a stand The 115V PRO250 homogenizer unit is a perfect fit between the PRO200 homogenizer unit and the benchtop PRO homogenizer units. It's…

…chopping Practical: Can be used with any suitable vessel anywhere in your laboratory Handy and mobile: Easy to hold or clamp it on a lab ring stand Simple to use: No sample loss due to transfers from a blender vessel. Just hold it in a beaker or other vessel and turn on the switch Easy to…

… For all types of samples, even tough or stringy 10mm and 20mm saw-tooth generator probes provide fast and efficient sample breakdown Stand Assembly for hands free Homogenizer Precision designed generator probes constructed of 316SS are easy to take apart for the cleaning &…

…range Easy impeller adjustment saves time Safely encloses spinning chuck to protect user Protects chuck from splashes Includes support rod, chuck, chuck key, chuck guard, and power cord. Remember to order a stand, clamp and impeller for a complete system to start mixing.

…is powered by a brushless DC (BDC) motor. The belt driven transmission is smooth, quiet and maintenance free. Ordering information: Clamp, stand, and impellers are available. Chuck (adjustable up to 10 mm or 3/8 in), chuck key, mounting support rod, external power supply, grounded power cord…

… Easy impeller adjustment saves time Safely encloses spinning chuck to protect user Protects chuck from splashes Includes support rod, chuck, chuck key, chuck guard, and grounded power cord. Remember to order a stand, clamp and impeller for a complete system to start mixing.

…package. Included in each purchase: overhead stirrer motor, integral clamp, stainless steel collet, external power supply, grounded power cord, stand, axial and radial mixing blades, mixing shaft, manual in four languages (English, French, Spanish and German) and three year warranty. …