Mixer Motor

Compare Tool

Select up to 3 products

Mixer Motor
1 - 32 of 60
Sort
View
Show
  • The BioRotator-6 is a compact, rotational mixer used for a wide variety of mixing needs. The mixing angle is fully adjustable and six mixing speeds are provided. When adjusted with the rotation axis of the motor in a horizontal position, a roller tube attachment (792E) permits hybridization and…

  • …include collet. Mixer Heads Optical shaft encoder relays the exact motor rotation speed data to the electronic mixer controller. Adjustable-tilt mounting assembly permits rotation of mixer head from 0º to 30º for proper positioning of shaft and propeller. Mixer heads include a chuck/collet…

  • …Model 152A propellers. Both models have a continuous duty rating. Mixers include collet chuck and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. Support stands and holders sold separately. Direct drives Brushless motors Fan cooled

  • …latest in cutting-edge science. V-spin harnesses the energy of an unequaled stepper motor, allowing for a wide variety of mixing, vibrating, and rotating cycles. This multipurpose unit is a rotator, vortex mixer, and blotter all in one. Designed to be cold room safe, and with an unprecedented 34…

  • Miniature Vortex Mixers

    labForce (a Thomas Scientific Brand)

    …samples, including nearly full 50 ml tubes. Despite its powerful motor, the Mini Vortexer has a footprint of less than 4x4 inches, allowing it to fit on even the most crowded bench. Insta-Touch operation means that the motor is automatically activated with slight pressure on the center cup…

  • …40 to 4000 rpm This general-purpose mixer is ideal for routine mixing of water-like viscosities. Speed ramps to set speed. This general-purpose mixer is ideal for routine mixing of water-like viscosities. Speed ramps to set speed. Brushed DC motor has a compact speed controller integrated…

  • Vortexer V-32 Vortex Mixers

    labForce (a Thomas Scientific Brand)

    Powerful motor for INSTANT vortexing Continuous or "touch" operation Q-Drive™ dynamic balancing system Variable speed from 200 to 3200 rpm The Vortexer V-32 sets the new standard in vortex mixing. With advanced Q-Drive™ technology, the Vortexer V-32 provides…

  • Vortexer V-32 Advanced Vortex Mixers

    labForce (a Thomas Scientific Brand)

    …eight microtubes Powerful motor for INSTANT vortexing Continuous or "touch" operation Q-Drive™ dynamic balancing system Variable speed from 200 to 3400 rpm The Advanced Vortexer V-32 is MORE than your standard vortex mixer. The unique design of the Multi-Head™…

  • …ready-made systems come complete with a mixer head, speed controller, shaft, propeller, clamp, and stand. Note: High-torque models include keyless chuck. Low-torque models include collet. Mixer Heads Heads feature a TENV, permanent-magnet DC motor with permanently lubricated ball bearing…

  • …Talboys Standard Heavy-Duty Vortex Mixer Designed for continuous duty The Talboys Standard Heavy-Duty Vortex Mixer is a variable speed analog mixer that is designed for continuous duty. The heavy-duty design and efficient motor allow this mixer to operate in continuous duty and…

  • …latest in cutting-edge science. V-spin harnesses the energy of an unequaled stepper motor, allowing for a wide variety of mixing, vibrating, and rotating cycles. This multipurpose unit is a rotator, vortex mixer, and blotter all in one. Cold room safe with an unprecedented 34 modes of operation,…

  • …sophistication. The robust 1/2 horsepower motor, PC/PLC connectivity and extensive features make the Caframo Crossover unparalleled in the market. Mixing up to 200 litres (55 gallons) in basic pre-mix, complex pilot scale, or full production batches this portable mixer weighs only 12 kg (26.5 lb).…

  • …controller adjacent to the mixer head. Rack-mount 1/2" (13 mm) dia rod fits into a dual-rod clamp (included) or use with tank clamp 04552-65 Replacement collet set including nut and key Replacement keyless chucks, include adapter and key Replacement motor brush set (set of two…

  • …control Two motor axles give you two mixers in one! The direct-drive axle provides high-speed, low-viscosity mixing; switch to the gear-reduction axle for your low-speed, high-viscosity mixing needs. Rugged, permanent-magnet, totally enclosed nonventilated (TENV) motor has permanently…

  • Since 1956 the Omni Mixer Homogenizer has been synonymous with laboratory homogenizers. The Omni Mixer Homogenizer is a powerful 600 watt homogenizer that is compatible with a wide range of generator probes, blade assemblies and sealed containers to offer the perfect mix of dependability,…

  • …operation Suitable for touch operation and continuous operation Wide speed range: 0-2500 rpm/min, stepless speed regulation of motor Adapters securely clicked onto appliance in any position Sturdy cast casing Specially designed silicone feet and steel base…

  • …BenchMate™ Cooling Thermal Mixer is a temperature controlled vortexer, designed for a variety of molecular biology applications that require consistent and precise results. With heating, cooling, and shaking capabilities, the BenchMate™ Cooling Thermal Mixer uses interchangeable blocks…

  • …for shaking tasks with all small vessels and microtiter plates Adapters detection Continuous or touch operation Stepless speed regulation of motor which with electronic speed control, constant speed can be reached 3000 rpm with speed feedback It has two operating modes, Mode A: the maximum…

  • …maximum speed or 40 lbs at low speed Digital count down timer Digital tachometer The Hotplate Shaker #6360 is powered by a 1/30 hp Bodine DC motor which drives the platform through a filtered SCR controller. The speed is continuously variable between a range of 20-240 osc/min. and incorporates…

  • …units. Powerful, reliable motor Optimized counter balance Circular orbit for effective vortexing at any speed Standard CombiCup™ accepts a variety of tube sizes Full range of accessories Counter Balance System Many vortex mixers prevent excessive vibration…

  • Turbo Mixers

    LW Scientific

    …Turbo Mixers. Ideal for the quick and complete mixing of samples, our cup and platform models will bring convenience and efficiency to your lab. They come with a variable speed control of up to 3000 RPM and can be activated to vibrate continuously or by pressure to the head. The high quality motor

  • …and incubators Made in the USA DIGITAL VORTEX-GENIE® 2 MIXER FOR APPLIED BIOSYSTEMS Digital Control and Display of Speed & Time This is a specially configured Digital Vortex-Genie 2 Mixer for Applied Biosystems Microplate Protocols ONLY. Includes specially designed…

  • Vortex Mixers

    Crystal Technologies

    …ensure every Silent Shaker® Vortex Mixer is precise, accurate and easy to use. These mixers conform to international design specifications and safety regulations to protect the user and environment. Ergonomically designed. Brushless DC motor drive for long life. Three operation…

  • Designed for Continuous Duty Applications Heavy-Duty Vortex Mixers feature a heavy-duty design and efficient motor to permit continuous duty operation, and the ability to handle accessory components over the entire speed range. Analog variable speed models or microprocessor-controlled digital…

  • The BenchMixer™ XL is a heavy duty vortex mixer designed to facilitate hands-free mixing in tubes, flasks, vials or cylinders. It is ideal for the QuEChERS pesticide analysis method and is instantly adaptable to an exceptionally broad range of vessels, racks and applications (horizontal or…

  • …largest samples, including nearly full 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4x4 inches, allowing it to fit on even the most crowded bench. Insta-Touch operation means that the motor is automatically activated with slight pressure on the center cup…

  • …Other features include: "no-walk" suction feet, cold room/incubator compatibility and spill-proof electronic controls. Powerful motor for INSTANT vortexing Continuous or "touch" operation Q-Drive™ dynamic balancing system Variable speed from 200 to 3200 rpm…

  • …single platform configuration has 24% more platform work surface than traditional nutating mixers. The MiniMixer and BioMixer can handle loads up to 2kg. Both have maintenance-free brushless motors and are safe for use in cold rooms and incubators. The speed for both models is 24 rpm. …

  • Laboratory mixer, homogenizing and mixing technology for cuttable, dry or liquid samples Analysis and quality control requires equipment that is flexible for preparing samples and easy to work with. These mixers are well suited for intense mixing, dispersing, homogenizing, emulsifying and…

  • Laboratory mixer, homogenizing and mixing technology for cuttable, dry or liquid samples Analysis and quality control requires equipment that is flexible for preparing samples and easy to work with. These mixers are well suited for intense mixing, dispersing, homogenizing, emulsifying and…

  • The Corning variable speed LSE Vortex Mixer provides fast, efficient mixing with minimal vibration. The unit features a powerful, counter-balanced motor drive, continuous or "touch" mix modes. A range of accessories are available for all common sample tubes and containers. Features: …

  • Cordless Drive Unit For Pellet Pestles

    DWK Life Sciences (Kimble)

    For all Kontes pellet pestle mixers Compact, hand-held unit Motor driven Comes complete with two “AA” batteries. Dimensions: 3” Dia. x 6” L.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.