Mini Spin Centrifuge

These mini-centrifuges are ideal for quick spin down of micro sample sizes. With a clear lid and electronic safety cut-off, samples can be safely observed at all times. The centrifuge quickly accelerates to maximum speed (6,600 rpm / 2,200 rcf) and stops within seconds while the motor mounting…

Our mini centrifuges are essential laboratory equipment used in clinical, environmental and industrial research. These personal centrifuges are ideal for quick spins, microfiltration of samples, cell separations and many other routine laboratory procedures. Features Ergonomically designed…

…inches wide, the MyFuge 12 truly is a personal microtube centrifuge with unmatched capacity and flexibility. COMBI-Rotor™, for tubes and strips Twice the capacity of a traditional microtube centrifuge or mini centrifuges Near silent operation Starts & stops with…

…Mini. Reliable and easy-to-use, the Prism™ Mini Centrifuge is compact and economical, allowing each workstation to be equipped with a "personal" mini centrifuge. The Prism™ Mini can be used for a wide range of molecular biology separations and quick spins. The centrifuge was…

The Prism mini centrifuge is compact and economical, allowing each workstation to be equipped with a "personal" centrifuge. Ideal for quick spins, it can be used for a wide range of molecular biology separations. The centrifuge was designed to be extremely compact with an exceptionally small…

The MyFuge™ Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly…

The OHAUS Frontier 5306 is a powerful mini centrifuge for simple and rapid liquid separation. The Frontier 5306 includes an 8-position 1.5/2 mL tube rotor as well as a 4-position 8-strip PCR tube rotor that can accommodate 32 individual PCR tubes or 0.2mL strip tubes. With the included adapters, 0.2…

…ergonomic design and variety of colors, the Sprout® Plus Mini Centrifuge by Heathrow Scientific is loaded with features that bring increased efficiency to the lab. Tool-free SnapSpin rotors and quick-spin options make the centrifuges fast and easy to use. The lid was functionally designed…

…is centrifuged (Mini: 12-14,000 x g, Midi: 750 x g) the pores of the membrane dilate (0.1-0.2 µm) and allow the sample to be purified and collected for subsequent downstream analyses.  The spin columns conveniently fit in to common centrifuge tubes for easy washing and collection (Mini: 2…

The Axygen Axyspin Plate Spinner is the first centrifuge designed specifically for quick and easy centrifugation of samples in PCR plates or microplates. Capacity for two standard plates Top loading design Exceptionally small footprint Starts and stops in seconds Use before and…

This  bench-top microcentrifuge is ideal for quick spin-downs of micro-centrifuge tubes. Includes an 12-position 1.5/2 mL tube rotor as well as a 4-position 12-strip PCR tube rotor that can accommodate 48 individual PCR tubes or 0.2mL strip tubes.

Benchmark's PlateFuge™ is the first "mini" sized centrifuge with a swing out rotor for microplates. Centrifuging plates before PCR ensures all reactants are in the bottom of the wells for proper concentrations and improved yields. In spite of its remarkably small footprint…

…Decelerates in just one second Four position PCR strip rotor The labForce MiniMouse Mini Centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, it is extremely easy to use. Simply close the lid and the…

…6 mini centrifuge also offers: Safety features: unit will not operate without lid in place Palm-shaped lid for left- or right-handed users Quick tube extraction Applications: mySPIN 12 centrifuge is ideal for most protocols requiring fast spins (12,500rpm/9,800…

…Patent App. 3 246 088 High-Speed Mini Centrifuge The high-speed Centrifuge (12,500 RPM) is designed to give you maximum speed and flexibility while being comfortable and easy to use. Ideal for most protocols requiring fast spins (12,500rpm / 9,800 x g), and appropriate for…

The Corning LSE Mini Microcentrifuge is a personal bench top instrument that operates at a fixed speed of 6,000 rpm (2,000 x g) and was designed for quick spin downs of micro-samples. Operation is made simpler and more convenient with the design of a quick-release rotor system and electronic brake.…

CM50MP Prepmix 3 Centrifuge — CarbonSpin Rotor Included Fast mini prep Regular mini prep Custom spin – mix – spin programs 13,500 RPM Safety lid lock Low sample heating 12 mixing modes 5 variable brake speeds Digital imbalance sensor Extra low…

Compact and economical centrifuge for PCR Plates. Quickly spins down droplets and condensation. Use before and after thermal cycling to improve PCR yield. Accepts skirted, non-skirted and all standard PCR plates. Less than 1/4 the size (and cost) of most plate centrifuges. Companion products for…

…DNA Mini Kit is available in two formats Q-spin (D6942) and V-spin (D6943). D6942 (Q-spin) features columns that are capless whereas D6943 (V-spin) includes columns that have a cap attached. The columns are otherwise identical in use and application and can be used in both vacuum or centrifugation…

…DNA Mini Kit is available in two formats Q-spin (D6942) and V-spin (D6943). D6942 (Q-spin) features columns that are capless whereas D6943 (V-spin) includes columns that have a cap attached. The columns are otherwise identical in use and application and can be used in both vacuum or centrifugation…

…9 minutes. The kit features an innovative and first of its kind FastFilter mini column nested within a regular HiBind® silica mini spin column to combine lysate clearance and DNA binding into one simple centrifugation step. Following wash and elute steps, purified plasmid DNA is immediately…

…LW Scientific ZipCombo centrifuge is the perfect solution to your micro-centrifugation needs! It provides all the performance of popular "Stat" centrifuges at a fraction of the cost. Spin down hematocrits at 12,000 rpm in only 3 minutes. Change the rotor to spin micro tubes at 12,000…

…Plasmid Mini Kit is available with 2 different types of columns: V-spin columns have an attached cap (D6943), while Q-spin columns are capless (D6942). The columns are otherwise identical in use and application. Either column can be used with both the vacuum or centrifugation protocols.

…the size of traditional centrifuges Accepts all popular types of PCR plates (skirted, semi, and non) and most microtiter plates labForce’s MicroPlate Centrifuge is the first "mini" sized centrifuge with a swing out rotor for microplates. Centrifuging plates before PCR ensures…

Adapter for Mini Plate Spinner C1000. The Mini Plate Spinner C1000 is 75% smaller than most plate centrifuges and accepts skirted, non-skirted and all standard PCR plates. Quickly spins down droplets and condensation. Use before and after thermal cycling to improve PCR yield. Support: 8 x…

…centrifuge, all its accessories and incorporates a 16-place micro tube rack as well. The DuraPorter is transparent, so any samples contained can be viewed and their integrity checked. Sprout® Mini Centrifuge With its ergonomic design, the Heathrow Scientific Sprout Mini Centrifuge is…

…rotor cap guarantee exceptionally low sample heating, far surpassing the industry’s most stringent standards. This mighty mini-centrifuge spins down samples at 15,000 RPM, yet runs on only 24 volts, and fits easily into the smallest spaces. Its high-performance motor with maintenance-free…

This compact centrifuge is ideal for most protocols calling for fast spins (up to 12,500 rpm / 9,800 rcf) and quick spin-downs. Useful for PCR®, microfilter cell separation, clinical applications, and HPLC protocols. Operation is extremely simple for this high-level of sophistication: Insert…

… 12-Place Rotor Compact design Large LCD display provides all visual information Compact design Whisper quiet operation Brushless motor drive, maintenance free Pulse operation for quick spins Automatic door lock Over-speed detection 2 YEAR MANUFACTURER WARRANTY

…Cost-effective, fixed-speed, combined mini centrifuge/vortex mixer for combined or independent centrifuge and mixing applications of microtubes and 0.2 ml microtube strips in low volume applications. Tubes are loaded into the rotor for simultaneous spinning, then removed for individual mixing…

Ideal for quick spin downs of microtubes and PCR tubes 8-Place 1.5/2.0ml Microtube rotor 7000rpm / 2680xg Features Four color options, green, yellow, blue and pink Maximum speed 7000rpm/2680xg Supplied with an 8 place 1.5/2.0ml microtube rotor and PCR rotor …

…strip), 6 tube adapters 0.2ml, 6 tube adapters 0.5ml, 4 o-rings, storage case, tube rack. Features and Functions Sleek and Compact mini centrifuge is ideal for microfi ltration, HPLC samples, DNA, RNA, and Protein applications Includes adapters to accommodate microtube and PCR tube…