Mill Grinding

Compare Tool

Select up to 3 products

Mill Grinding
1 - 32 of 91
Sort
View
Show
  • High Shear Mill pulverizes chemicals, pigments, wood, bones, paper and more Easy access for sample recovery and cleaning Microswitch prevents operation while lid is open Powerful dual speed motor, 14,000/18,000 rpm 60 minute timer, speed selector switch and amperage…

  • Harmonized Tariff Code:  9027.90

  • …one set of removable grinding plates (3371J35) and toothed feed for dry material Capacity 1-10 lbs. per hour at a speed of 30 to 50 rpm Clamp attaches to table tops 13 to 38 mm thick. Overall height 24 1/2 inches. Model 3371H20 Worm Feed enables grinder to grind wet and oily substances…

  • PTFE Grinding Jars

    Across International

    Highly non-sticky PTFE jars. These jars are used whenever small quantity of samples need to be grinded/milled without contamination. Each jar set includes grinding jar, lid, silicon sealing gasket and a mixed size agate grinding balls. Lead tim

  • …three grinding containers. Rack lid is matched to Shatterbox clamp, and holds grinding containers down during operation. When 8507R Rack is used with three grinding containers, all three should be the same kind, either 8507 or 8508. Small Tungsten Carbide Container: Small grinding container…

  • Nylon Grinding Jars

    Across International

    Nylon grinding jars for planetary ball mills. Each jar package includes grinding jar, lid, silicon sealing gasket and different sizes of mixed agate grinding balls. Lead time for 2L and 3L jars: 2 weeks.

  • …dry milling Long wearing for non-contaminating grinding Tough, hard, non-porous surface is chip resistant, easily cleaned and unaffected by most acids or alkalies Non-conductive, non-magnetic with excellent resistance to mechanical and thermal shock Model 3440G50 Grinding Media…

  • Made of wear-resistant chemical porcelain fortified with alumina Positive lid locking bar and hand wheel for quick, easy opening and closing Precision ground cover and gasket seat assure leakproof fit Wide mouths for fast emptying, cleaning and loading Gaskets are oil, solvent…

  • Small Grinding Vial Set

    SPEX SamplePrep

    …two end plugs, and four polycarbonate center cylinders (6751C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity 0.5mLto 4.0mL. NOTE: These products are only available for sale to Domestic U.S. Customers.

  • Grinding Ball Dispenser and all 96-well titer plates. 2155 Grinding Balls: 3/8 inch (9.5 mm) Made of 440C stainless steel. For use in 2230 titer plate or in 2190 Vial Rack with 3116PC, 2241-PC and 2241-PE Vials to grind extra large or tough samples. Sold in bags of 100. 2156 Grinding

  • Large Grinding Vial Set

    SPEX SamplePrep

    Large Grinding Vial Set: Set includes stainless steel impactor and two end plugs, plus four polycarbonate center cylinders (6801C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity up to 50 mL. Vial Rack…

  • …Small Grinding Vials: The Extractor/Vial Opener lifts 6700-series vials in and out of the Freezer/Mill, and is used to remove the vial end plugs from the center section. One 6754 is supplied with each 6770 Freezer/Mill and as part of the 6870S Accessory Package. Vial Rack for Small Grinding

  • Mid-Size Grinding Vial Set

    SPEX SamplePrep

    Grinding vial intermediate in size between 6751 and 6801: sample capacity up to 25 mL. Stainless steel end plugs and impactor, polycarbonate center cylinder (6881C). Set includes one complete vial plus three extra cylinders. Must be used with 6884 and 6886 Adapters.

  • …planetary ball mill is a benchtop unit designed to pulverize soft, fibrous and brittle materials. The mill develops extremely high centrifugal forces resulting in energy input that is up to 50% higher than in other planetary ball mills. It has a single grinding station for grinding jars with a…

  • …Biology Grade Grinding Beads are treated to inactivate contaminating enzymes and have been tested accordingly. Low Binding Grinding Beads are coated to reduce non-specific binding of nucleic acids and proteins and are used for lysing dilute samples of cells. Acid Washed Grinding Beads are treated…

  • Natural Brazilian agate stone grinding balls for planetary and high energy ball mills.

  • For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonate-encapsulated steel. Set includes one complete vial plus three spare center sections. Sample capacity 0.5 mL to 4.0 mL

  • For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6801C). Will not add Cr like stainless steel components of 6801 vial. Set includes one complete vial plus three extra cylinders. Sample…

  • For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonateencapsulated steel. Vial set includes one complete vial plus three extra center cylinders. Sample capacity up to 25 mL. Must be used with 6884 and 6886 Adapters.

  • Mid-Size Cr-Free Grinding Vial Set: For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6881C). Vial set consists of one complete vial and three spare cylinders. Sample capacity up to 25 ml.…

  • For RoHS/WEEE testing of electronic components for chromium. End plugs and impactor are Cr-free ASTM 06 steel. Will not add Cr to sample like stainless steel components of 6751 Vial. Set includes three extra 6751C cylinders. Sample capacity 0.5 to 4.0 mL.

  • …closing. Applications Dry grinding very tough or hard samples where heat generated can damage plastic tubes Cryogenic dry grinding where severe cold temps (dry ice or LN2) can damage plastic tubes Milling or grinding non-biological samples where plastic contamination…

  • Micro-Mill® Grinders

    Bel-Art - SP Scienceware

    For rapid, high-speed grinding of small samples from 20 to 50ml. Stainless steel or hard-faced blade rotates at speeds up to 12,000 rpm to successfully grind bauxite, bone, ceramics, coal, Devarda’s alloy, fertilizer, filter paper, fly ash, frozen tissue, glass, grain, kaolinites, leaves,…

  • …closing. Applications Dry grinding very tough or hard samples where heat generated can damage plastic tubes Cryogenic dry grinding where severe cold temps (dry ice or LN2) can damage plastic tubes Milling or grinding non-biological samples where plastic contamination…

  • …proteins during grinding. Sold in pairs. 2664 Cryo-Block for 50 mL Centrifuge Tubes: Aluminum block holds six standard conical-bottom 50 mL centrifuge tubes for cryogenic milling. Cryo-Blocks are chilled in 2600 Cryo-Station to preserve RNA and proteins during grinding. Use with 2195 Large…

  • …XRF sample disk. Instructions included. PrepAid Vertrel® XF (1224F38): Liquid fluorocarbon grinding aid. Prevents caking, reduces contamination, evaporates after grinding. One-quart bottle. Instructions included. NOTE: These products are only available for sale to Domestic…

  • The grinding vessel, a round bottom tube with 2 mm wall, has grinding chamber made of precision bore tubing and top reservoir with pouring spout, to accommodate displaced fluid. Unground walls are completely transparent. Pestle is rounded to conform to bottom of grinding chamber and is either…

  • Grinds materials, by both impact and abrasion, that other grinders cannot Easy-to-use Very rapid grinding action Consistent particle size Air swept for easier cleaning and less thermal degradation USDA approved for NIR sample preparation Mill is designed for the rapid grinding of soft to…

  • Large ceramic grinding cylinders with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

  • Thomas No. 1203C57 Batch mill suitable for dry grinding of hard and brittle substances. Double-walled grinding chamber can be cooled with water through two hose adapters Removable grinding chamber, easy to clean Two grinding chambers can be alternately operated using one drive M 21 blade…

  • Disposable Polypropylene Pellet Pestles

    DWK Life Sciences (Kimble)

    Resuspend protein and DNA pellets or grind soft tissues in micro centrifuge tubes Pestles are made of autoclavable blue polypropylene Pestles specially designed to match microtubes Optional cordless drive unit available , see Thomas number 3411E25 .

  • …steps allowing for perfect adaptation to the sample requirements. Cleaning the mill is quick and easy as the air jet effects a complete discharge of the material from the grinding chamber. This new cyclone mill in proven RETSCH quality optimizes the reproducible sample preparation to NIR…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.