Microtubes

Compare Tool

Select up to 3 products

Microtubes
1 - 32 of 282
Sort
View
Show
  • SureSeal S™ Microcentrifuge Tubes

    MTC Bio

    MTC Bio’s SureSeal S™ microcentrifuge tubes are designed for a broad range of research applications, including enzyme digests, DNA isolation/purification, centrifugation, incubation and general sample/reagent storage. With a variety of design advances, SureSeal Tubes improve sample…

  • Ultraflux Individual PCR Tubes

    SSI

    0.2 and 0.5 mL volumes Dome or flat caps Manufactured from the finest grade of virgin polypropylene, these tubes feature dimensional uniformity throughout the critical sidewall and conical bottom. This ensures even contact with the thermal cycler temperature block which delivers…

  • 1.5mL MaxyClear Snaplock Microcentrifuge Tubes

    Axygen®

    Axygen® 1.5mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…

  • Clear-View™ Snap-Cap Microtubes

    Excel Scientific

    If you're tired of inferior tubes, try these... the most consistent, highest quality microtubes on the market! Using high quality polypropylene resin enables us to tightly control tube wall thickness, the consistency of the cap fit, and deliver superior clarity. We QC the tubes to…

  • 100-Cell Hinged Plastic Boxes

    Crystal Technologies

    100-cell hinged top plastic boxes made of polypropylene offer an alternative storage system for all microtubes up to 2.0 ml and standard 1.2 ml cryovials.The grid is alpha-numerically matrixed with 1-10 and A-J characters hot stamped directly onto the grid for fast, easy sample identification. Boxes…

  • 96 Well Flipper Microtube Racks

    MBP

    The Flipper microtube rack is designed to hold either 96 0.5 mL or 96 1.5/2.0 mL style microcentrifuge tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes. The Flipper is fitted with a clear polypropylene lid and both sides are labeled in…

  • E-Z Microtubes

    Wheaton

    …storage to -196°C. WHEATON E-Z Microtubes are offered in a standard 96-well polypropylene rack with a locking lid. This format is perfectly suited for use with automated storage and retrieval as well as multichannel pipettes. The new E-Z Microtubes have permanent 2D Data Matrix bar codes…

  • 1.7mL MaxyClear Snaplock Microcentrifuge Tubes

    Axygen®

    Axygen® 1.7mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…

  • Siliconized 1.5mL G-Tube, Flat Top Microcentrifuge Tube, Sterile

    Bio Plas

    …The flat top lid forms an extra-tight seal that will not come open during processing. Yet, it's easy to open with thumb pressure or our handy MicroTube Tool (2591L21) Inscribing Patches: All flat top tubes have a textured writing surface on top of the caps. The 1.5ml and 2.0 mL tubes have an…

  • Screw Microtubes

    SSI

    Ideal for storage and can be used in a wide range of environment including ultralow temperatures Temperature range: -196°C to +121°C* Over 20,000 x rcf Ultraclear medical grade polypropylene Convenient EasyTurn 3/4-turn thread Tubes are routinely tested to over…

  • MTS Cluster Tube Convenient Packs

    Thomas®

    MicroTube Rack System™ for sample collection, assay, and short or long term storage 0.65, 1.1 and 2.2mL tubes and variety of capping options are available Cost effective Deep-well plate alternative, with removable wells Now available in familiar single pack format

  • Microcentrifuge Tubes in Self-Standing Bags

    Globe Scientific

    Globe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…

  • Microtainer® MAP Microtube for Automated Process

    BD

    BD Microtainer® MAP Microtube for Automated Process is the first one-piece instrument-compatible microtube to offer both standard full-size patient identification labels as well as compatibility with most automated hematology instruments. The BD Microtainer® MAP tube is designed to improve…

  • Cryogenic Microtubes

    Bio Plas

    Sterile Tubes Of virgin polypropylene with heavy uniform wall construction Excellent for low temperature storage of cells or biological fluids in the vapor phase of liquid nitrogen or in any mechanical freezer Ideal for sample processing where incubation, autoclaving,…

  • PCR Tubes

    Eppendorf

    Eppendorf PCR Tubes Manufactured from polypropylene Reduced risk of contamination Available in 0.2 and 0.5 mL sizes 2-part polycarbonate rack consists of work tray and frame for 96 x 0.2 mL PCR tubes All tubes can be directly transferred to the Thermoblock Autoclavable at…

  • 50-Place Microtube Storage Boxes

    Labnet

    Sturdy Autoclavable Translucent plastic lids permit visual sample identification Polypropylene boxes will not degrade when exposed to moisture and ultra-cold temperatures as low as -80°C. Superior substitutes for cardboard boxes which tend to degrade and absorb moisture after…

  • Thin Wall PCR Tubes

    MBP

    RNase- and DNase-free Non-sterile Polypropylene construction Thin wall construction assures uniform contact with the thermal cycler temperature block for optimal heat transfer. Available in both 8 tube strips and individual 0.2 mL and 0.5 mL tubes to cover all applications.…

  • Cardboard Microtube Boxes

    Heathrow

    These low profile boxes are available in two sizes to accommodate standard 0.5 mL and 0.2 mL micro tubes and vessels of a similar size. They are designed to ensure that the tubes contained will remain in their appointed well even if the box is tipped or knocked when the lid is in place. …

  • Dome Cap PCR Tubes

    MBP

    Polypropylene Thin walls 0.2 or 0.5 mL capacities Molded from 100% virgin polypropylene, PCR tubes feature thin walls for optimal heat transfer and caps that seal securely to minimize evaporation. Extensive quality inspections to ensure consistent performance. PurePak™ packaging…

  • Breathe-Easy & Breathe-Easier Membranes

    Diversified Biotech

    Gas permeable sealing membranes for microtubes Multiple uses Thermal and chemical stability Centrifuge compatible Gamma irradiated Breathable Breathe-Easy and Breathe-Easier microtube sealing membranes offer two rates of gas exchange to meet your requirements for cell…

  • Talboys Stationary Half Size Test Tube Rack

    Troemner

    …Racks - Half Size, Stationary PVC coated steel Includes hardware for easy attachment to platforms 7L x 5W x 4H" (12.7 x 17.8 x 10.2cm) / Micro-Tube Rack:1.7H" (4.3cm) Test Tube Racks - Full Size, Stationary PVC coated steel Includes hardware for easy attachment to platforms 16.5L…

  • Ultraflux Snapstrip PCR Tubes

    SSI

    Thin tube wall is engineered to give the most efficient environment for rapid thermal transfer enabling optimal yield in your methods and applications Attached 8-strips tubes each have their own individual attached dome cap. The individual caps help to resolve any potential concerns centering…

  • Locking Microcentrifuge Tubes

    Globe Scientific

    …Tube Globe Scientific Locking Microcentrifuge Tubes are engineered with a secure locking system that provides the security of a screw cap microtube with the simplicity of a snap cap tube. Features: Secure – Maintains sample integrity with locking cap which prevents accidental…

  • LABTAG™ Cryogenic Color Dot Labels for 1.5mL Microtubes (0.50")

    GA International

    Ideal for identification of vials, plastic bags and other containers for long-term storage and color coding in deep-freezing and harsh laboratory environments. Temperature range from -196°C to +110°C

  • E-Z Ex-Traction Glass Microtubes

    Wheaton

    E-Z Ex-Traction Glass MicroTubes are precision engineered and manufactured to tight tolerances under strict quality standards in order to reduce the chance of failure in automated sample handling and storage systems. The interior wall of the MicroTube transitions smoothly into the conical well at…

  • Polypropylene Microtube Racks

    Eppendorf

    Capacity: 2 rows of 12 tubes Robust coupling mechanism Non-slip stand Numbered bores UV-resistant Autoclavable The Tube Rack is ideal for sample processing and the short or medium-term storage of samples. As it can withstand temperatures as low as -80°C, the rack can also be…

  • Excel Scientific 80-Hole Racks For Microtubes

    Excel Scientific

    CLEARANCE SALE! Original Price: $49.35 A vailable in a wide variety of colors, including fluorescents 16 x 5 well format with conical bottoms for fraction collection Accommodate microcentrifuge tubes, including screw-caps Polypropylene construction for freezing and…

  • Ultraflux Snapstrip II PCR Tube

    SSI

    Thin tube wall is engineered to give the most efficient environment for rapid thermal transfer enabling optimal yield in your methods and applications Available in flat and low profile versions Attached, 8-strip tubes each have their own high optical clarity flat cap. Ideal for use in…

  • Racks, Microtubes

    Dynalon

    Rack 32PL 0.5ML Microtube (1212V36) Product Dimensions (l x w x h) : 6.562x3.312x1.75in Beta tube rack for use with (1212V35) Mini Model Beta Storage Box holds 0.5ml tubes.   Rack 32PL 1.5ML Microtube (1212V37) Product Dimensions (l x w x h) : 6.5x3.31x1.437in …

  • Wireless Racks for Microtubes

    Globe Scientific

    Reinforced nylon rack is autoclavable and chemical resistant Fits 1.5mL and 2.0mL microtubes Single piece construction Molded handles facilitate secure handling Alphanumeric markings for sample identification Stackable Dimensions (L x W x H): 24-Place rack: 143 x 90 x 52mm…

  • Reversible Racks for Microtubes

    Globe Scientific

    Autoclavable polypropylene (PP) Excellent rack for benchtop use or freezer storage 80/60 well rack capacities: 80-place for 1.5mL and 2mL tubes 60-place for 0.5mL and 0.2 mL tubes 96 well rack capacities: 96-place for 1.5mL and 2.0mL tubes 96-place for 0.5 mL and 0.2 mL tubes …

  • Adapter 10X20mL Microtubes

    Thermo Scientific

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.