Microscope Slide Labels

Easily create chemical-resistant microscope slide labels with the StainerBondz™ polyester label material (B-481). Print almost anywhere with a Brady handheld label printer. Specialized — Available in presized shapes for commonly used slides and tissue cassettes in which superior chemical resistance…

StainerBondz™ Super Chemical Resistant Polyester (B-481) is designed for use in the slide staining process and other laboratory ID which requires superior chemical resistance. StainerBondz™ B-481 matte white polyester has a permanent acrylic adhesive and is thermal transfer printable with B30 series…

…chemical-resistant polyester (B-481) is designed for use in the slide staining process and other laboratory ID which requires superior chemical resistance. Performs well in the commonly used H&E (hematoxilin and eosin) slide staining process. Excellent resistance to a wide variety of chemicals,…

Special 2 x 3 inch size (6686K20) Thickness 1.10-1.30 mm Washed, with plain edges Clinical grade Special 3 1/4 x 4 inch size (6686M20) Thickness 1.10-1.30 mm Washed, with plain cut edges Clinical grade

Label Size: 0.875" x 0.875" (22mm x 22mm) Ideal Use: Microscope Slides Sheet Layout: 8 across - 12 down Labels/Sheet: 96 Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack" U of M: 2,400/pack Rainbow Pack: Includes 5…

StainerBondz™ Super Chemical Resistant Polyester (B-481) is designed for use in the slide staining process and other laboratory ID which requires superior chemical resistance. StainerBondz™ B-481 matte white polyester has a permanent acrylic adhesive and is thermal transfer printable with B30 series…

These microscope slides are made from super white glass and have been given a permanent positive charge to electrostatically attract and bind tissue sections to the slide.  Slides are 25 x 75mm, 1.0-1.1mm thick, have ground edges and are pre-cleaned. Available with a white or blue frosted area…

These microscope slides are made of super white glass and are silane coated, producing a sticky surface to promote adhesion of tissue sections to the slide.  Slides are 25 x 75mm, 1.0-1.1mm thick, have ground edges and are pre-cleaned. Available with a white or blue frosted area for labeling.…

…will hold up to twenty standard microscope slides 75 mmx 25 mm (3 x 1 in.) and is made of two parts: a base holding the slides horizontally offering numbered spaces for easy identification, and transparent doors which can either cover the slides or be swung behind the SlideFolder™…

Create a file system for your slide boxes Storage racks make organization of your samples easy. The clear acrylic construction allows you to see the labels on the slide boxes. Place boxes in rows or columns by color to create an easy coding system. Each rack holds up to 15 slide boxes.

…180° sitting flat on surfaces and prevents misplacement EVA foam lines the bottom of the box helping to hold slides securely in place and protect against damage Multiple labeling areas, a large area on the lid of the box with “project” and “date” molded in and the…

…121°C. Xylene labels resist boiling water baths, autoclaving and moderate freezer temperatures. Specially Designed - Rolls are specially top-coated to readily accept thermal transfer printing. Convenient - Labels are available in a microscope slide size as well as a unique…

…−29°C Resistant to ultraviolet light, mildew, chemicals and dirt and won't discolor, crack or tear Excellent for labeling microscopic slides— adhesive backing sticks well to any plastic, glass or metal surface Chemically compatible with most lab reagents although…

…contact with liquid nitrogen and sterilization by Gamma irradiations (up to 50KGy, test conditions). Cryo DTermo™ labels for tubes, vials, microscope slides, microcentrifuge tubes, microplates, cryoboxes, freezer boxes, plastic bags and other containers are available. Can fit microtubes,…

…microscope slides horizontally Each space is pre-numbered for easy identification Transparent covers protect slides and allow easy reading of ID labels Covers can be swung behind the base for ready access to the slides Five color options for organization and classification of slides …

…labels are perfect for identifying all types of microscope slides. XyliTAG™ will not be colored by histological stains such as eosin Y and hematoxylin. Xylene resistant labels could withstand temperatures as low as -40 ºF (-40 ºC) and as high as 248 °F (120 °C).The labels are…

…laboratory chemicals. These labels can withstand contact with commercial thinners and acetone. In order to achieve such a chemical resistance the XilyTUFF™ labels must be printed with our XAR-class solvent resistant ribbons. Ideal for identification of microscope slides and tissue cassettes in…

The STATMARK Permanent ink pen in an ultra fine tip is ideal for labeling microscope slides and cassettes. Made of rigid nylon that allow for precise hand marking on glass slides as well as on most tissue embedding cassettes.

…cabinet drawers hold up to 5000 standard 1” x 3” microscope slides Cabinets can be interlocked up to 10 units high Plastic drawer divides can be removed to store objects up to 2” (5 cm) wide Drawers slide smoothly and easily Back of drawer serves as handle for transportation…

… Drawers have either black phenolic pull knobs or steel handles. Foam rubber dividers keep slides upright when drawers are partially filled. Identification tabs are included for labeling. Each slide cabinet is fully inspected before shipment and is packaged using recyclable, biodegradable…

…and their surfaces. Applications Wide selection of cryogenic laser labels are available for labeling tubes, vials, cryoboxes, freezer boxes, cell culture plates, PCR plates, PCR tubes, microscope slides, eppendorf tubes, microtubes, cryovials, Vacutainer® tubes, tube tops, film cans,…

…Control: Stain slides by the Gram stain technique and examine microscopically. The "C±" square should contain a mixture of gram-positive cocci and gram-negative rods. Reagents:  The BBL Gram Slide is a conventional 1" x 3" microscope slide imprinted with 10…

Superfrost® Series Coated, indissoluble marking surface, for clearer, more readable slide labeling and more accurate slide identification 6685K45 is 1.2 mm thick.    

…brilliant white epoxy ink, which allows labeling of slides easily with any pen or marker. Gold Seal Rite-On® Frosted slides are best for use with 20-50 micron sections processed free-floating for immunohistochemistry and silver staining. These slides will make section mounting much easier and…

Grow cells directly on the slide without any need for future transfer; ideal for growing and viewing cells under a microscope on standard 25mm x 75mm slide Integrated gasket prevents cross-contamination between chambers Inert hydrophobic green border printed on slide to define cell culture…

…Chamber Slides are designed for various cell-based experiments and are also useful for virus, toxicity tests and immunocytological experiments. Cell Culture Chamber Slides provide removable chambers that enable cell growth directly on the microscopic slide, convenient for staining and microscopic…

…cell adhesion Soda glass slide Polystyrene media chamber 1, 2, 4 or 8 well configurations Glass slides have proprietary cell culture grade polystyrene chamber and biocompatible adhesive that remains with the media chamber after detachment from slide. Slide has white frosted end for labeling.

Permanent ink in an ultrafine tip is ideal for labeling microscope slides and cassettes. StatMark Pens are made of rigid nylon that allow for precise hand marking on glass slides as well as on most tissue embedding cassettes. This quick drying ink is highly resistant to aqueous based stains,…

…labs. These ribbons in combination with our xylene-resistant labels are designed for printing labels in thermal-transfer printers for identification of microscope slides, tissue staining cassettes, bottles and other containers. The labels printed with xylene-proof ribbons (solvent-proof ribbons)…

Label Size: 1.0" x 1.0" (25mm x 25mm) Ideal Use: Microscope Slides Sheet Layout: 8 across - 10 down Labels/Sheet: 80 Colors: White U of M: 1,600/pack

Laboratory labels formatted for laser printers. Tough-Tags® are chemically inert laboratory labels that strongly adhere to microtubes, test tubes, storage boxes and microscope slides. They resist organic solvents and caustic agents. Tough-Tags® are perfect for accurately…

…convenient carton. NOTE: thickness correction of microscope objectives is usually etched or printed on the objective. Circles, No. 1, Red Label Thickness 0.13 to 0.17 mm Packed in 1 oz. boxes; case contains ten boxes Circles, No. 2, Red Label Thickness 0.17 to 0.25 mm Packed in 1 oz.…