Microcentrifuge Tubes Polypropylene

Compare Tool

Select up to 3 products

Microcentrifuge Tubes Polypropylene
1 - 32 of 183
Sort
View
Show
  • Biotix microcentrifuge tubes are manufactured with medical grade virgin polypropylene for superior clarity. These snapcap tubes are leak resistant, boil proof, and able to withstand 20000 RCF. Try our Microcentrifuge tubes: Sizes include 0.65mL, 1.5mL, and 2.0mL Graduation marks for…

  • …in the center. The 1.5 mL and 2.0 mL tubes have an additional textured writing surface on the side of the tube. G-Tubes are made of a tough, transparent and specially formulated polypropylene for better sample viewing and overall strength. These tubes are designed with thicker walls to…

  • Polypropylene or Low-Density Polyethylene (LDPE) Certified RNase- and DNase-free Non-sterile Specialty microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open.  Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes…

  • Deep O-ring caps Upgraded polypropylene for superior quality Usable up to 5000 g. Silicone O-rings in caps seat against reverse bevel in tube to eliminate contamination. Skirted tubes self-stand. Easy to open, even with gloves. Configurations shown in listings.

  • …lid! Always recognize the original Eppendorf Safe–Lock tube by the "ep" in the lid. The hinged lid on Eppendorf Safe–Lock tubes provides outstanding protection against accidental opening of tube lids ensuring highest sample protection. This feature is especially…

  • These polypropylene (PP) microcentrifuge tubes without cap are resistant to most chemical reagents and can be autoclaved at 130°C. The tubes are offered in 1.5mL and 2mL sizes.

  • … Frosted writing area Attached lids provide a tight leakproof seal, can be easily opened and allow trouble-free piercing. Tubes are leak tested to 20,000 RCF for 20 minutes at 20°C with an aqueous solution. Tubes are packaged in two bags of 500 tubes per case, except for 2591L95.

  • From the SureSeal family of sterile tubes you trust comes MTC Bio’s new 2.0mL screw cap microcentrifuge tubes. Made from ultra-clear polypropylene, with crisp printed graduations, SureSeal 2mL screw-cap tubes offer the best visualization of sample on the market today! May be centrifuged at up…

  • … Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5,…

  • Unattached HDPE rim seal caps provide a tight secure seal Polypropylene Self-standing Sterile Withstands a maximum RCF of 20,000 xg

  • … Frosted writing area on tubes and caps Freezable to -80°C Microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 0.6 mL tubes are graduated at 0.2, 0.4 and…

  • … External graduations and frosted writing spot for easy sample identification Flat cap surface for convenient labeling Withstands maximum RCF of 17,000 x g Costar microcentrifuge tubes are certified RNase-/DNase-free and are autoclavable. The tubes are made of polypropylene.

  • Screw cap for 5.0 ml MacrewTube™ Microcentrifuge tubes. Polypropylene. RNase, DNase, Pyrogen and DNA free. Autoclavable. Temp range +121 °C to -196 °C.

  • Feature screw caps that provide a tight secure seal Sterile Attached cap with black silicone O-ring Withstands a maximum RCF of 20,000 x g

  • …biology, chemistry, and biochemistry. Safer than ever: Flex Tubes® can be centrifuged up to 30,000 × g without any problems! Features Tube lid is easy to open and close for ergonomic operation Polypropylene provides high resistance to chemicals, mechanical stress, and…

  • Microcentrifuge Tubes

    Celltreat Scientific

    …opaque black tube to protect light sensitive compounds All tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand Temperature range of -80°C to 120°C Manufactured from high quality polypropylene Maximum RCF…

  • Microcentrifuge Tube Racks. Polypropylene . Available in Red or Blue. For 1.5 ml micro test tubes. Can accommodate 50 micro tubes with lid open (without interfering) or 100 micro tubes with lid closed or without lids. Racks are stackable even when completely loaded with test tubes.

  • …x w x h) : 10.562x4.75x1.812in Microcentrifuge Tube Racks, Polypropylene. Yellow. For 1.5 micro test tubes. Can accommodate 50 micro tubes with lid open (without interfering) or 100 micro tubes with lid closed or without lids. Racks are stackable even when completely loaded with test tubes.

  • SuperSpin™ tubes feature an extra-thick and durable wall that can withstand centrifugation to 40,000 x G. The ultra-clear polypropylene resin gives you a clear view of the pellet as well as correct color rendition. Designed with ergonomic caps and smooth surfaces that make this tube easy to…

  • Biologix clear polypropylene non-sterile (rnase & dnase free) conical bottom microcentrifuge tubes with safe lock or flat top caps available. Tubes have frosted writing area and marked graduations.

  • …SureSeal S™ microcentrifuge tubes are designed for a broad range of research applications, including enzyme digests, DNA isolation/purification, centrifugation, incubation and general sample/reagent storage. With a variety of design advances, SureSeal Tubes improve sample visualization,…

  • …smooth interior-low liquid retention Made from highest quality, virgin, single melt polypropylene Our latest design incorporates over 20 improvements that have made these tubes our #1 seller. The tubes seal easily with a distinct "click" and stay closed through incubation,…

  • …many other applications. The Snap-Cap Microcentrifuge Tube’s smooth, conical interior lets you remove your entire sample with ease, and without material hangup. You can even cut it to remove a spun pellet. The Snap-Cap is attached to each tube, and the entire unit is autoclavable at…

  • …Ultra-High Performance - High spin rates with maximum RCF ratings of up to 20,000 x g for 50mL centrifuge tubes and 17,000 x g for 15mL centrifuge tubes Certified for Science SM - Tubes are manufactured in a class 100,000 clean room, gamma irradiated to SAL 10 -6 , and are certified to be…

  • Microcentrifuge Tubes

    United Scientific Supplies

    …high-quality virgin polypropylene, these microcentrifuge tubes are RNase, DNase, and Pyrogen free for safer use in molecular biology and other biochemical applications. Include a connected snap cap, large molded-in graduations, and a frosted surface for easier writing. Autoclavable tubes can be used…

  • 1.5 and 2.0 ml microcentrifuge tubes, graduated, with frosted window and flat, safe-lock cap These microcentrifuge tubes are moulded from virgin polypropylene. Their safe-lock mechanism guarantees closed tubes even during boiling or autoclaving. The innovative cap design includes an additional…

  • …of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements. The ultra-clear polypropylene won't hinder…

  • Microcentrifuge Tubes

    Bel-Art - SP Scienceware

    These micro sample tubes have a captive plug and will withstand the forces of a microcentrifuge. Polypropylene Steam autoclavable at 121°C (250°F)

  • These polyropylene microcentrifuge tubes feature attached leak-resistant flat snap caps. Each tube is molded with precise graduation marks for accurate measurements.  Mfr. No. 111562 & 111572 These 1.5mL and 2mL microcentrifuge tubes are lot certified to be RNase free, DNase free,…

  • …Force (RCF): 18,000 Brittleness Temp.: 0°C Max. Temp.: 135°C Material: PP Max. Volume: 1.75mL Note: Polypropylene is not recommended for use with Phenol Chloroform. Low temperature storage, multiple spin cycles or organic solvents can affect maximum force.…

  • Microcentrifuge Tubes include caps with ethylene propylene O-Rings and are ideal for any sample processing application. Excellent for frozen storage or when working with hazardous or valuable materials. Packed 500 in a bag and 10 bags in a pack. All style of tubes and caps are autoclavable. Tubes

  • Microcentrifuge Tubes

    Evergreen Scientific

    Polypropylene tubes withstand up to 12,000 × g. Polyethylene tubes withstand force to 6,000 × g. Our polystyrene tubes withstand 3,000 × g and are useful in lipid fractionation.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.