Micro Buret

Permanently marked with an individualized serial number Supplied with a Certificate of Graduation Accuracy Scale is durable white ceramic enamel Stopcock for both sizes is Ps 2. Filling is through stopcock; filling tube accepts 1/4” i.d. flexible tubing. 1990U10 has 0.01 mL subdivisions…

…stopcock to control liquid; tube is 5/16 inch o.d. Calibrated to the accuracy requirements found in ASTM specification E 694 Kimax precision bore buret has a side filling tube with a separate stopcock to control liquid within the permanently attached reservoir, approximately 70 mL in capacity.…

Burette with Schellbach stripes type Schilling / Bürkle with original Bürkle dosing armature. A universal aid in the laboratory, electroplating industry, water treatment plants, for field analyses, etc. Precise dosing using the press button, exact fine titration with the micro-screw and…

Scale is durable white ceramic enamel Funnel top to accept No. 3 one-holed rubber stopper Class A accuracy Stopcock for both sizes is Standard Taper 2 1990K60 is graduated in 0.01 mL intervals. 1990K80 is graduated in 0.02 mL intervals.

The top of this Class A buret is funnel shaped to accommodate a rubber stopper and glass tubing to fill from a delivery tip via suction. Made of borosilicate glass with durable colored scale, both sizes have 2mm stopcock with PTFE plug.

Serialized Colored scale Teflon® stopcock plug The capacity tolerance on Class A PYREX burets is established by ASTM E-287 and is calibrated in accordance with ASTM E-542 and D-511. Each buret is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to…

The titrating burette with splinter protection is a fast acting burette with Schellbach stripes based on Dr. Schilling's design with automatic zero point extraction and Bürkle dosing armature.The glass burette has a plastic sheathing which increases resistance to breaking and protects…

Combines high precision with low cost 0.5% accuracy; vernier type micrometer Liquid comes in contact with only glass and Teflon ® Viton O-ring gives a vacuum-tight seal All other plastic parts of polypropylene; instrument may be autoclaved Fills and delivers liquid with micrometer control …

The capacity tolerance on these burets is established by ASTM E 287 and they are calibrated in accordance with ASTM E 542. Tips are carefully drawn from accurate bore tubing to ensure proper drainage rates. This buret has colored markings, fine, sharp lines and large easy-to-read numbers. The…

…in accordance with Category B (tolerances according to DIN ISO 385); no stopcock; exact dispensing via spring activated discharge jet or drop via micro screw; left or right hand operation for ease of use; sturdy & easily removable support stand; includes 500mL LDPE chemically resistent squeeze…

…PYREX® burets are suitable for use in school and institutional laboratories not requiring the accuracy of our Class A models. They are used when dispensing large volumes of liquids rapidly and accurately. Made from close tolerance, accurate bore tubing with uniform walls, these burets have a…

…flow. 2mm bore PYREX® Standard Taper stopcocks turn freely, yet give positive control. For replacement PYREX® stopcocks, see No. 7680. For replacement retaining clips, see No. 7280. The capacity tolerance on these burets is established by ASTM E-1189 and is calibrated in accordance with ASTM E-542.

…PYREX® burets are suitable for use in school and institutional laboratories not requiring the accuracy of our Class A models. They are used when dispensing large volumes of liquids rapidly and accurately. Made from close tolerance, accurate bore tubing with uniform walls, these burets…

Ideal for micro work, filling burets, manometers, and small bottles. Steam autoclavable at 250°F (121°C).

Perfect for micro work, filling burettes, manometers and small bottles. Polypropylene plastic Steam autoclavable at 121°C (250°F)

CLAMPS, BURET, Clamp will hold two burets from micro to 100mL. Spring loaded mechanism adjusts simply by squeezing, yet hold buret firmly in place. Mounts directly to standard support rod with built in hook connector. Constructed of epoxy coated aluminum with vinyl jaws. CHEMGLASS LAB CLAMPS,…

…for tip "pulling" and to maintain full 10 µl capacity; non-rotating stainless steel plunger eliminates tip wobble; functions only as a buret by rotating, no pushing the plunger; 40 to 50 nanoliters of fluid are injected into each Oocyte utilizing a tip diameter of 10 to 20 microns (accuracy…