Membrane Nylon Hydrophilic

…include a graduated glass fiber prefilter to removed larger particles and either a 0.20 µm or 0.45 µm membrane filter for fine filtration. This combination of membranes provides significantly greater throughput than standard filters without prefiltration media, especially when filtering…

Filter Code: HPWP Application: 0.45 um pore size, hydrophilic nylon membrane, 90 mm diameter

…pack)Applications: HPLC; Filtration of viscous or particulate laden samples for HPLC Application: This 33 mm syringe filter with a Hydrophilic Nylon membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions…

…and biotinylated detection systems. High binding capacity of 450 µg/cm 2 , maximum "lot-to-lot" consistency and excellent signal retention. The inherent charge on this nylon membrane, along with its hydrophilic nature make consistent, repeatable results a reality for researchers.

For both aqueous and organic solvent filtrations Hydrophilic Low level of extractables Nalgene nylon membranes are ideal for use with HPLC solvents and ultracleaning solutions for electronic laboratories. They are useful for the sterilization and clarification of buffers and culture media.…

…transfers Naturally hydrophilic, no need for wetting agents Quality controlled manufacturing process for consistent, accurate results Higher binding capacity (approx. 350 µg.cm 2 ) than nitrocellulose Naturally hydrophilic, MAGNA Nylon membrane eliminates the need for…

…autoclaving and is completely unaffected by temperatures up to 180°C (356°F) or steam sterilization. Since Magna Nylon filters are naturally hydrophilic, wetting agents are not used during manufacture. Extractable levels are less than 0.0015 mg/cm 2 . Binding capacity is 350…

…and heat resistant Nylon is a very strong, heat resistant membrane manufactured by impregnating a polyester web with the nylon polymer. Several uniques properties of Nylon make this polymer universally accepted in the laboratory. Nylon is inherently hydrophilic lending to negligible amounts…

Nylon (Polyamide) membranes are hydrophilic and widely used in both aqueous and organic solvent filtration applications.They are best used in a pH range of 3-14 and at an operating temperature below 100 degrees Celsius.

…0.22µm or 0.45µm pore sizes. The Nylon membrane is has great chemical resistance and makes them ideal for filtering more aggressive solutions such as alcohols and DMSO. All materials comply with USP Class VI Standards and FDA compliances. Nylon is hydrophilic, has low extractables, is high…

Nylon filters are naturally hydrophilic and no wetting agents are used in manufacture.With an extractable level •Compatible with aqueous and most organic solvents •Autoclavable; unaffected by temperatures up to 180C

Nylon filters are naturally hydrophilic and no wetting agents are used in manufacture.With an extractable level •Compatible with aqueous and most organic solvents •Autoclavable; unaffected by temperatures up to 180C

…The membranes are inherently hydrophilic and therefore do not require prewetting prior to use. BIOTRANS membranes are also heat resistant and solvent-resistant and will not shrink, crack or tear thus allowing multiple hybridization cycles to be performed. BIOTRANS(+) nylon membrane is used…

mdi’s Nylon-66 HNN membrane disc filters are hydrophilic, non-media migrating, biologically inert, plain white absolute membrane filters. These filters can be used for aqueous as well as organic solvent filtration and offer a number of key features: Very low extractable Wide chemical…

mdi Nylon-66 membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

Syringe filters for convenient filtration of small sample sizes through membranes. Nylon (Polyamide) membranes are hydrophilic and widely used in both aqueous and organic solvent filtration applications.They are best used in a pH range of 3-14 and at an operating temperature below 100 degrees…

…  membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes. Features & Benefits Available in several pore sizes (both hydrophilic…

…& Benefits:.Wide range of pore sizes available .Resistant to aggressive solvents Applications:Particle Removal and Clarification; Solvent Filtration; Particle Analysis; Paint Monitoring; Automotive Cleanliness Analysis Application: 5.0 um pore size, hydrophilic nylon membrane, 47 mm diameter

…housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyamide/Nylon (PA) This is a hydrophilic material; it is recommended for filtration of aqueous or organic/aqueous medium polar liquids.

…membrane with a binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no…

…lower ergonomic impact than manual syringe filtration. Available in 0.20 µm and 0.45 µm pore sizes with hydrophilic PTFE, Durapore PVDF, Millipore Express PLUS PES, or nylon membranesApplications: HPLC; Filtration of viscous or particulate laden samples for HPLC Legal Information: …

…or nylon membranesAvailable in 2 Pack Sizes:SKU ending with NB (-------NB): 250 per packSKU ending with NK (-------NK): 1000 devices (4x 250 per pack)Applications: HPLC; Filtration of viscous or particulate laden samples for HPLC Application: This 33 mm syringe filter with a Hydrophilic PVDF…

…than manual syringe filtration. Available in 0.20 µm and 0.45 µm pore sizes with Durapore PVDF, Millipore Express PLUS PES, or nylon membranesAvailable in 2 Pack Sizes:SKU ending with NB (-------NB): 250 per packSKU ending with NK (-------NK): 1000 devices (4x 250 per pack)Applications:…

…and 500ml sizes and are individually packaged in easy to open plastic bags with individually wrapped caps. NEW – 250 & 500mL Bottle Top Filters available with Nylon (PA) membrane Hydrophilic nylon membrane has excellent chemical compatibility and does not require pre-wetting

…during usage that involves aggressive handling or automated equipment. A naturally hydrophilic membrane, GVS Nylon Filtration Membrane does not require wetting agents that can interfere with biological processes. This membrane has porosity of 70/80% for high diffusion and low-flow resistance.

…during usage that involves aggressive handling or automated equipment. A naturally hydrophilic membrane, GVS Nylon Filtration Membrane does not require wetting agents that can interfere with biological processes. This membrane has porosity of 70/80% for high diffusion and low-flow resistance.

…during usage that involves aggressive handling or automated equipment. A naturally hydrophilic membrane, GVS Nylon Filtration Membrane does not require wetting agents that can interfere with biological processes. This membrane has porosity of 70/80% for high diffusion and low-flow resistance.

…during usage that involves aggressive handling or automated equipment. A naturally hydrophilic membrane, GVS Nylon Filtration Membrane does not require wetting agents that can interfere with biological processes. This membrane has porosity of 70/80% for high diffusion and low-flow resistance.

…during usage that involves aggressive handling or automated equipment. A naturally hydrophilic membrane, GVS Nylon Filtration Membrane does not require wetting agents that can interfere with biological processes. This membrane has porosity of 70/80% for high diffusion and low-flow resistance.

…during usage that involves aggressive handling or automated equipment. A naturally hydrophilic membrane, GVS Nylon Filtration Membrane does not require wetting agents that can interfere with biological processes. This membrane has porosity of 70/80% for high diffusion and low-flow resistance.

…during usage that involves aggressive handling or automated equipment. A naturally hydrophilic membrane, GVS Nylon Filtration Membrane does not require wetting agents that can interfere with biological processes. This membrane has porosity of 70/80% for high diffusion and low-flow resistance.

…during usage that involves aggressive handling or automated equipment. A naturally hydrophilic membrane, GVS Nylon Filtration Membrane does not require wetting agents that can interfere with biological processes. This membrane has porosity of 70/80% for high diffusion and low-flow resistance.