Membrane Filters 0.2

Compare Tool

Select up to 3 products

Membrane Filters 0.2
1 - 32 of 307
Sort
View
Show
  • Accessory for accu-jet® pro Pipette Controller (26330), (26331), (26332) and (26333). Ideal for tissue and cell culture applications 0.2 µm Non-Sterile Pack of 10

  • …Esters (MCE) membrane is a general purpose filter used in many applications for the microbiological examination of water, wastewater, pharmaceuticals, food, and beverages, and air monitoring. MCE membranes offer high recovery rates and superior flow rates. Advantec MCE membranes are high purity…

  • …and cell counting methods. Whatman MCE filters from Cytiva business are composed of cellulose acetate and cellulose nitrate, giving the membrane a more uniform surface than pure nitrocellulose filters. Whatman MCE filter for E. coli culturing MCE filters support microbiology applications such…

  • Syringe Type Membrane Filters

    Thermo Scientific Nalgene

    …or pre-filtration of small volumes of “dirty”, high-protein fluids Disposable 25 mm filters for use with a syringe; utilizes a 0.2 mm cellulose acetate membrane filter with a built-in glass fiber prefilter Unitary construction provides leakproof seal, eliminates bypass…

  • Filter both aqueous and organic solvents Optically clear when wet Hydrophilic PTFE membranes are a thin, unsupported, highly porous film that offers maximum chemical and pH resistance to a broad range of aqueous and organic solvents. This membrane exhibits high flow rates with minimal…

  • Filter corrosive solvents Sterile venting Protect pumps and machinery from aqueous aerosols PTFE membrane is a thin, highly porous film that behaves as an absolute retentive membrane. Their inherently hydrophobic nature make PTFE membranes ideal for applications such as filtering

  • Nylon Membrane Filters

    Advantec MFS

    Broad chemical compatibility Negligible extractables Strong and heat resistant Nylon is a very strong, heat resistant membrane manufactured by impregnating a polyester web with the nylon polymer. Several uniques properties of Nylon make this polymer universally accepted in the…

  • Autofil® 50 mL Funnel Only with 0.2 µm PES Membrane, 48/pk 40mm Filter Diameter Permanent vacuum hose connection to minimize set-up time Made from Class VI Materials Manufactured in a Class 100,000 Clean Room Manufactured according to ISO 13485 standards Gamma Sterilized in the USA …

  • …tumor. Preparation Note: This product is supplied at a concentration of 1 mg/mL in 50 mM Tris-HCl, with 150 mM NaCl. It is filtered using a 0.2mum filter. Thaw this solution slowly before use at 2-8C to avoid gel formation. For use as a coating, dilute in a balanced salt solution, coat…

  • …transparency, the membranes have the same characteristics as standard Poretics polycarbonate membrane filters. Ideally suited for fluorescence microscopy because: The surface of the membrane is flat and smooth, assuring that no micro-organisms are captured within the filter structure as with…

  • PTFE Membrane Syringe Filters

    mdi Membrane Technologies

    mdi PTFE membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

  • PVDF Membrane Syringe Filters

    mdi Membrane Technologies

    mdi PVDF membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

  • Polypropylene Membrane Syringe Filters

    mdi Membrane Technologies

    mdi Hydrophilic Polypropylene membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low…

  • Nylon-66 Membrane Syringe Filters

    mdi Membrane Technologies

    mdi Nylon-66 membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

  • …sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced…

  • …Versatile Laboratory Membrane Filter Excellent chemical compatibility with esters, bases, and alcohols Naturally hydrophilic Available in 0.2 and 0.45 µm pore sizes, in diameters ranging from 13 to 142 mm HPLC certified. Provides assurance that the filter will not add…

  • Low protein binding Low aqueous extractables Advantec Cellulose Acetate (CA) membrane filters are low protein binding and ideally suited for applications such as diagnostic cytology and receptor binding studies. Cellulose Acetate's hydrophilic nature and it's low absorptive…

  • …Processes three to seven times more sample volume than filters without prefilter Nonsterile GD/X filters are available in two diameters: 13 mm and 25 mm, and three pore sizes: 0.2 µm, 0.45 µm, and 5 µm Glass fiber prefiltration stack for filtering larger sample volumes with less back pressure…

  • mdi’s Centrifugal Filters are meant for high value laboratory applications like sterilization, purification, particulate removal and clarification of up to 500 µL of high value, difficult to get, biological/chemical samples. These filters offer a number of key features: Absolute…

  • … Reduces cost while increasing productivity 0.2 or 0.45 µm filter 12 x 32 mm vials Replace syringe-coupled filtration devices and autosampler vials with a single, disposable unit Available in seven different membrane materials Each Mini-UniPrep consists of two parts:…

  • …clogging and back pressure build up. Syringeless filter materials and accessories Mini-UniPrep filters are available with Nylon, PVDF, PES, glass microfiber, PTFE, polypropylene, and regenerated cellulose membrane filters. These filters can be used either manually or with a compressor unit.…

  • Hydrophilic PTFE Membrane Syringe Filters

    mdi Membrane Technologies

    mdi Hydrophilic PTFE membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand…

  • 25mm ABLUO™ Syringe Filters

    GVS Filter Technology

    …Polyethylene, Glass Fiber Membrane Diameter: 25 mm Pore Size: 0.20 μm, 0.22 μm, 0.45 µm, 0.80 µm, 1.20 µm, 5.00 µm and others Applications HPLC sample preparation Biological fluids Buffer solutions Sterile filtering of tissue culture…

  • mdi syringe filter type SYPL have a PES membrane filter in a polypropylene housing. The low protein binding PES membrane make these ideal for life science research applications, particularly where sample size is very small and recovery of a protein of interest is sought. These filters are ethylene…

  • …NEW High Flow Foxx Velocity 0.2um PES membrane. Perfect for filtering FBS and other viscous solutions. Our membrane is low protein binding and surfactant-free. Autofil SS is available in 250ml, 500ml, and 1000ml complete units or funnel only bottle-top filters. All units are sterile and manufactured…

  • SFCA Bottle Top Filters

    Thermo Scientific Nalgene

    …touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.1 micron filters guard against mycoplasma contamination 0.2 micron filters remove all bacteria 0.45 and 0.8 micron filters for particle removal and fluid clarification 90 mm diameter filters provide large…

  • …Cellulose Nitrate Membranes are validated for: Inhibitory effect of ink grids on membrane filters per ASTM D 4200-82 Microbial recovery Microbial retention Sterility Applications: Product microbiology Water microbiology Available Pore Sizes: 0.2 µm, 0.45…

  • CN Filter Units

    Thermo Scientific Nalgene

    …touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.1 micron filters guard against mycoplasma contamination 0.2 micron filters remove all bacteria 0.45 and 0.8 micron filters for particle removal and fluid clarification 90 mm diameter filters provide large…

  • mdi PVDF membrane Syringe filters type SYVG incorporate a PVDF membrane with a binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low…

  • mdi Nylon-66 membrane Syringe filters type SYGN incorporate a Nylon-66 membrane with a binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC…

  • …capacity Recommended prefilter for 0.2 to 0.6 µm filters Type AP20 Lower retention, higher dirt-holding capacity than AP15 filters Recommended prefilter for 0.8 to 8.0 µm filters Use upstream to protect type AP15 filters Type AP25 Added…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.